Injen 21-22 Ford Bronco L4-2.3L Turbo/V6-2.7L Twin Turbo SS Muffler Delete Kit
Injen 21-22 Ford Bronco L4-2.3L Turbo/V6-2.7L Twin Turbo SS Muffler Delete Kit
A$486.77
IN STOCK! Est Ship 3-5 days.
This item is IN STOCK at one of our warehouses or distribution centres, the ETA is the approximate time required to prepare your order for dispatch.
We accept
Description
This isn't a cheap delete kit made from thin cold-rolled steel that will either rust or crack, the Injen Muffler Delete kit is made for 304 stainless steel that is mandrel bent right here in Pomona, CA for durable, long-lasting performance. During the design process, our engineers made sure that the install was a simple as possible and retained the use of the factory hanger locations. This allows for quick swaps without throwing any wrenches!
Product Overview
The all-new 6th Generation Ford Bronco is an amazing vehicle that comes from the factory ready to tackle the world. That said, there are a few design flaws that limit the amazing ability the Bronco has to offer. One of those flaws is the reduced approach and departure angle from the oversize stock muffler and low hanging exhaust tip. Injen has recognized this issue and has an affordable solution that allow you not only improve your approach and departure angles, but also improve performance and completely change the sound of your Bronco!
Features and Benefits
- Fits both 2-door and 4-door models without modifications
- Dyno Proven gains of up to 8 hp and 10 lb-ft. of torque
- Fast and simple bolt-on that provides increased approach and departure angles
- Injen's Muffler Delete Kit replaces the restrictive factory muffler.
- Straight through, single exit design developed for maximum exhaust flow
- Manufactured from huge 3.0in (76mm) mandrel-bent 304 stainless-steel tubing
- High-tuck design for increased ground clearance
- Oversized tubing reduces restriction providing increased airflow and performance
- Increase Throttle Response and Decreases Turbo Lag
- Hand Crafted and TIG Welded to Perfection for Strength and Durability
- Uses all factory mounting locations with factory-style hangers
- Includes high quality band clamps for a simple, leak-free installation
- Designed and manufactured in Pomona, CA
- EMISSIONS
- Note: This part is not an emissions-related part and therefore can be used on Emission Controlled Vehicles without a CARB EO#
Product Details
| Compatible Throttle Controller: | PT0013B |
|---|---|
| Description: | Injen 21-22 Ford Bronco L4-2.3L Turbo/V6-2.7L Twin Turbo SS Muffler Delete Kit |
| Exhaust System Connection: | Clamp On |
| Exhaust Tip Finish: | Stainless Steel |
| Exhaust Tip Material: | Stainless Steel |
| Exhaust Tip Outside Diameter: | 3.00 |
| Exhaust Tip Quantity: | 1 |
| Grade Type: | Performance |
| Hangers Included: | Yes |
| Hardware Included: | Yes |
| Mid Section Pipe OD: | N/A |
| Part Number: | injSES9300MD |
| Pipe Material: | 304 Stainless Steel |
| Prop 65 (C, R or CR): | CR |
| Prop 65 - Short Label: | prop65_warning.jpg |
| Prop 65 Yes/No: | Yes |
| Rear Section Pipe OD: | 3.00 |
| Title: | Injen SES Muffler Delete Exhaust System |
Part Type
Exhaust System Kit
Features
- Designed and manufactured in Pomona, CA
- Dyno Proven gains of up to 8 hp and 10 lb-ft. of torque
- EMISSIONS
- Fast and simple bolt-on that provides increased approach and departure angles
- Fits both 2-door and 4-door models without modifications
- Hand Crafted and TIG Welded to Perfection for Strength and Durability
- High-tuck design for increased ground clearance
- Includes high quality band clamps for a simple, leak-free installation
- Increase Throttle Response and Decreases Turbo Lag
- Injen's Muffler Delete Kit replaces the restrictive factory muffler.
- Manufactured from huge 3.0in (76mm) mandrel-bent 304 stainless-steel tubing
- Note: This part is not an emissions-related part and therefore can be used on Emission Controlled Vehicles without a CARB EO#
- Oversized tubing reduces restriction providing increased airflow and performance
- Straight through, single exit design developed for maximum exhaust flow
- Uses all factory mounting locations with factory-style hangers
Specifications
- Product Attributes - UPC
- 843115029524
- Product Attributes - Brand
- Injen
- Product Attributes - Quantity
- Sold individually.
- Product Attributes - Part Type
- Exhaust Pipes, Muffler Eliminator Pipes
- Product Attributes - Product Line
- Injen Super SES Stainless Muffler Delete Kits
- Product Attributes - Inlet Quantity
- 1
- Product Attributes - Outlet Quantity
- 1
- Product Attributes - Inlet Diameter (in.)
- Stock in.
- Product Attributes - Outlet Diameter (in.)
- 3.00 in.
- Product Attributes - Muffler Eliminator Finish
- Natural
- Product Attributes - Manufacturer's Part Number
- SES9300MD
- Product Attributes - Muffler Eliminator Material
- 304 stainless steel
Reference Information
| Brand Name/s | Injen |
|---|---|
| StreetFX SKU | injSES9300MD |
| SFX Item ID | 4243815 |
| Supplier Item Code | 4243815 |
| Manufacturer SKU | SES9300MD |
| Manufacturer UPC | 843115029524 |
| Alternative References | L4-2.3L, Turbo/V6-2.7L |
Brochures
Compatibility
| Application Data |
|
|---|
Loading compatibility information...
Keep shopping
More from Injen
