Injen 07-18 Jeep Wrangler (JK) V6 3.6L/3.8L SES Muffler Delete Kit
Injen 07-18 Jeep Wrangler (JK) V6 3.6L/3.8L SES Muffler Delete Kit
A$414.09
IN STOCK! Est Ship 3-5 days.
This item is IN STOCK at one of our warehouses or distribution centres, the ETA is the approximate time required to prepare your order for dispatch.
We accept
Description
The Jeep Wrangler is an amazing vehicle that comes from the factory ready to tackle the world. That said, there are a few design flaws that limit the amazing ability the Wrangler has to offer. One of those flaws is the reduced approach and departure angle from the oversize stock muffler and low hanging exhaust tip. Injen has recognized this issue and has an affordable solution that allow you not only improve your approach and departure angles, but also improve performance and completely change the sound of your JK!, , SES5003MD is our newest muffler delete kit for the 2007-2018 Jeep Wrangler JK (3.6L & 3.8L) and is a fantastic solution for those that want to climb those steeper obstacles without breaking the bank on a high tuck exhaust. In fact, you can easily swap over to this muffler delete for the weekend wheeling trips and then reinstall your OE muffler for your weekly commute ? all within 20 minutes. This isn't our cheap delete kit made from thin cold-rolled steel that will either rust or crack, the Injen Muffler Delete kit is made for 304 stainless steel that is mandrel bent right here in Pomona, CA for durable, long-lasting performance. During the design process, our engineers made sure that the install was a simple as possible and retained the use of the factory hanger locations. This allows for quick swaps without throwing any wrenches!, , As always, the SES5003MD muffler delete works seamlessly with our full line of Jeep performance products. From Rotomolded air intakes to throttle response controllers to complete performance exhaust systems, Injen Technology is here to help you take on the world in your Jeep!
Product Overview
The Jeep Wrangler is an amazing vehicle that comes from the factory ready to tackle the world. That said, there are a few design flaws that limit the amazing ability the Wrangler has to offer. One of those flaws is the reduced approach and departure angle from the oversize stock muffler and low hanging exhaust tip. Injen has recognized this issue and has an affordable solution that allow you not only improve your approach and departure angles, but also improve performance and completely change the sound of your JK!, , SES5003MD is our newest muffler delete kit for the 2007-2018 Jeep Wrangler JK (3.6L & 3.8L) and is a fantastic solution for those that want to climb those steeper obstacles without breaking the bank on a high tuck exhaust. In fact, you can easily swap over to this muffler delete for the weekend wheeling trips and then reinstall your OE muffler for your weekly commute ? all within 20 minutes. This isn't our cheap delete kit made from thin cold-rolled steel that will either rust or crack, the Injen Muffler Delete kit is made for 304 stainless steel that is mandrel bent right here in Pomona, CA for durable, long-lasting performance. During the design process, our engineers made sure that the install was a simple as possible and retained the use of the factory hanger locations. This allows for quick swaps without throwing any wrenches!, , As always, the SES5003MD muffler delete works seamlessly with our full line of Jeep performance products. From Rotomolded air intakes to throttle response controllers to complete performance exhaust systems, Injen Technology is here to help you take on the world in your Jeep!
Features and Benefits
- Made From Mandrel Bent 60mm 304 Stainless Steel
- Provides increased approach and departure angles
- Aggressive engine tone, especially under full throttle
- Injen's Muffler Delete Kit replaces the restrictive factory muffler and exhaust pipe.
- Smooth pipe routing eliminates restrictions and greatly improves airflow
- Uses Factory Hanger
- No additional tuning required
- Simple Bolt-on Installation using factory mounting points with no cutting or welding
- Injen Intake also available ? EVO5002 (3.8L) and EVO5003 (3.6L)
- Injen Snorkel also available - EVO15070
- Injen X-Pedal Throttle Response Controller ? PT0013
- Made in Pomona California, USA
Product Details
| Catalytic Converter Quantity: | 0 |
|---|---|
| Compatible Throttle Controller: | PT0013B |
| Description: | Muffler Delete Kit |
| Exhaust System Connection: | Clamp |
| Finish: | Polished |
| Grade Type: | Performance |
| Hangers Included: | Yes |
| Hardware Included: | Yes |
| Muffler Body Diameter: | N/A |
| Muffler Body Material: | 304 Stainless Steel |
| Muffler Body Shape: | N/A |
| Muffler Flanged Inlet: | No |
| Muffler Flanged Outlet: | No |
| Muffler Outlet Quantity: | 0 |
| Muffler Quantity: | 0 |
| Part Number: | injSES5003MD |
| Pipe Material: | 304 Stainless Steel |
| Primary Pipe OD: | 2.375 |
| Prop 65 (C, R or CR): | CR |
| Prop 65 - Short Label: | prop65_warning.jpg |
| Prop 65 Yes/No: | Yes |
| Secondary Pipe OD: | N/A |
| Stepped Pipe Diameter: | No |
| Tail Pipe Material: | Stainless Steel |
| Tail Pipe Outlet Outside Diameter: | 2.375 |
| Tail Pipe Quantity: | 0 |
| Title: | Injen SES Muffler Delete Kit |
| WARNING CA Proposition 65 Message: | This product can expose you to chemicals including Chromium; Nickel; Carbon Black and Cobalt; which are known to the State of California to cause cancer. |
| WARNING CA Proposition 65: | Yes |
| Y-Pipe Included: | No |
Part Type
Exhaust System Kit
Features
- Aggressive engine tone, especially under full throttle
- Injen Intake also available ? EVO5002 (3.8L) and EVO5003 (3.6L)
- Injen Snorkel also available - EVO15070
- Injen X-Pedal Throttle Response Controller ? PT0013
- Injen's Muffler Delete Kit replaces the restrictive factory muffler and exhaust pipe.
- Made From Mandrel Bent 60mm 304 Stainless Steel
- Made in Pomona California, USA
- No additional tuning required
- Provides increased approach and departure angles
- Simple Bolt-on Installation using factory mounting points with no cutting or welding
- Smooth pipe routing eliminates restrictions and greatly improves airflow
- Uses Factory Hanger
Specifications
- Product Attributes - UPC
- 843115027759
- Product Attributes - Brand
- Injen
- Product Attributes - Quantity
- Sold individually.
- Product Attributes - Part Type
- Exhaust Pipes, Muffler Eliminator Pipes
- Product Attributes - Product Line
- Injen Super SES Stainless Muffler Delete Kits
- Product Attributes - Inlet Quantity
- 1
- Product Attributes - Outlet Quantity
- 1
- Product Attributes - Inlet Diameter (in.)
- 2.38 in.
- Product Attributes - Outlet Diameter (in.)
- 2.38 in.
- Product Attributes - Muffler Eliminator Finish
- Polished
- Product Attributes - Manufacturer's Part Number
- SES5003MD
- Product Attributes - Muffler Eliminator Material
- 304 stainless steel
Reference Information
| Brand Name/s | Injen |
|---|---|
| StreetFX SKU | injSES5003MD |
| SFX Item ID | 4243575 |
| Supplier Item Code | 4243575 |
| Manufacturer SKU | SES5003MD |
| Manufacturer UPC | 843115027759 |
| Alternative References | 3.6L/3.8L |
Brochures
Compatibility
| Application Data |
|
|---|
Loading compatibility information...
Keep shopping
More from Injen
Injen
Injen 15-18 VW Golf / GTI MKVII 2.0L Turbo TSI Black Short Ram Intake with MR Tech and Heat Shield
injSP3078BLK
A$622.25
