Injen 08-10 Ford F-250/F-350 6.4L Powerstroke Evolution Intake
Injen 08-10 Ford F-250/F-350 6.4L Powerstroke Evolution Intake
A$775.51
Available from MFR.
This item is available from the manufacturer's distribution centre. The dispatch timeframe shown is an estimate based on historical order processing and release times for this part. This item is not held in our own warehouse, and actual dispatch timing may vary depending on manufacturer workload and logistics at the time of ordering.
We accept
Description
The Evolution of cold air intakes is here. The Evolution cold air intake system by Injen Technology is the next generation of performance intake systems. The EVO9005 is specifically engineered for the 2008-2010 Ford Diesel Trucks with the 6.4L Powerstroke engine. Every EVO9005 cold air intake is made in the USA from cross linked high density polyethylene for extreme durability. They include stainless steel hardware and automotive grade urethane couplers. No cutting or drilling required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS. , , The EVO9005 was precisely tuned and tested on our in-house dyno to replicate stock fueling while increasing horsepower and torque. The EVO9005 system features our 2-piece box design that incorporates our boost plenum, a massive 360? SuperNano-Web dry air filter, a smooth Rotomolded induction tube for reduced restriction levels, and premium hardware. Every Injen Evolution air induction system utilizes Injen's proprietary SuperNano-Web dry air filters. The Evolution induction systems utilize some of the largest filters on the market employing super deep filter pleats, with some measuring over 1.25"deep! This particular intake kit also features our SHUR-LOCK mounting system on the air filter to ensure a non-slip seal. The EVO9005 cold air intake system was designed to use the maximum space available under the hood to ensure optimum breathing room and extreme performance. The Evolution can't be stopped?.. Roto-molded Housing and Boost Plenum; The EVO9005 system features our 2-piece box design that incorporates our boost plenum. Designed 100% in 3D ensures a hassle free, drop-in installation. Engineered to work seamlessly with the factory ram air system. Roto-molded Intake Tube; The EVO9005 Evolution Cold Air Intake System uses a custom designed and dyno-tuned intake tube to produce huge power gains while retaining an OE quality fit. , ,
Product Overview
The Evolution of cold air intakes is here. The Evolution cold air intake system by Injen Technology is the next generation of performance intake systems. The EVO9005 is specifically engineered for the 2008-2010 Ford Diesel Trucks with the 6.4L Powerstroke engine. Every EVO9005 cold air intake is made in the USA from cross linked high density polyethylene for extreme durability. They include stainless steel hardware and automotive grade urethane couplers. No cutting or drilling required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS. , , The EVO9005 was precisely tuned and tested on our in-house dyno to replicate stock fueling while increasing horsepower and torque. The EVO9005 system features our 2-piece box design that incorporates our boost plenum, a massive 360? SuperNano-Web dry air filter, a smooth Rotomolded induction tube for reduced restriction levels, and premium hardware. Every Injen Evolution air induction system utilizes Injen's proprietary SuperNano-Web dry air filters. The Evolution induction systems utilize some of the largest filters on the market employing super deep filter pleats, with some measuring over 1.25"deep! This particular intake kit also features our SHUR-LOCK mounting system on the air filter to ensure a non-slip seal. The EVO9005 cold air intake system was designed to use the maximum space available under the hood to ensure optimum breathing room and extreme performance. The Evolution can't be stopped?.. Roto-molded Housing and Boost Plenum; The EVO9005 system features our 2-piece box design that incorporates our boost plenum. Designed 100% in 3D ensures a hassle free, drop-in installation. Engineered to work seamlessly with the factory ram air system. Roto-molded Intake Tube; The EVO9005 Evolution Cold Air Intake System uses a custom designed and dyno-tuned intake tube to produce huge power gains while retaining an OE quality fit. , ,
Features and Benefits
- Stainless Steel Hardware/Clamps And Screws
- Dyno Proven gains of up to 23 hp and 53 lb-ft. of torque
- Designed to work with the stock calibration
- Aggressive intake growl under acceleration
- Durable Roto-Molded XLPE Polyethylene housing and intake tube
- Reinforced automotive grade silicone couplers
- Fully serviceable Injen SuperNano-Web dry air filter
- Replacement air filter part number X-1126-BB
- Optional hydroshield part number 1075BLK
- Stainless steel band clamps with inner protective liner
- Aggressive underHood appearance while maintaining an OE fit
- Made in Pomona, California USA
- Injen Technology Limited Lifetime Warranty
- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Product Details
| Black Hydroshield (Optional): | 1075BLK |
|---|---|
| Description: | Evolution Series Air Induction System |
| Filter Color: | Blue |
| Filter Media: | SuperNano-Web Dry |
| Grade Type: | Performance |
| HP Gain: | 23 |
| Heat Shield Included: | No |
| Intake Color: | Black |
| Mounting Hardware Included: | Yes |
| Part Number: | injEVO9005 |
| Prop 65 (C, R or CR): | CR |
| Prop 65 - Short Label: | prop65_warning.jpg |
| Prop 65 Yes/No: | Yes |
| Red Hydroshield (Optional): | N/A |
| Replacement Filter Part Number: | X-1126-BB |
| TQ Gain: | 53 |
| Title: | Injen EVOLUTION Cold Air Intake System |
| Tube Material: | Rotomolded XLPE |
| Universal or Specific Fit: | Specific |
| WARNING CA Proposition 65 Message: | This product can expose you to chemicals including Chromium; Nickel; Carbon Black and Cobalt; which are known to the State of California to cause cancer. |
| WARNING CA Proposition 65: | Yes |
Part Type
Engine Cold Air Intake
Features
- Aggressive intake growl under acceleration
- Aggressive underHood appearance while maintaining an OE fit
- Designed to work with the stock calibration
- Durable Roto-Molded XLPE Polyethylene housing and intake tube
- Dyno Proven gains of up to 23 hp and 53 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Injen Technology Limited Lifetime Warranty
- Made in Pomona, California USA
- Optional hydroshield part number 1075BLK
- Reinforced automotive grade silicone couplers
- Replacement air filter part number X-1126-BB
- Stainless steel band clamps with inner protective liner
- Stainless Steel Hardware/Clamps And Screws
- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Specifications
- Product Attributes - UPC
- 843115027964
- Product Attributes - Brand
- Injen
- Product Attributes - Quantity
- Sold as a kit.
- Product Attributes - Part Type
- Air Intake Kits
- Product Attributes - Tube Color
- Black
- Product Attributes - Filter Color
- Blue
- Product Attributes - Product Line
- Injen Evolution Series Cold Air Intake Kits
- Product Attributes - Sleeve Color
- Black
- Product Attributes - Tube Material
- Polyethylene
- Product Attributes - Air Filter Type
- Dry
- Product Attributes - Filter End Cap Color
- Black
- Product Attributes - Air Intake Filter Material
- Synthetic
- Product Attributes - Manufacturer's Part Number
- EVO9005
Reference Information
| Brand Name/s | Injen |
|---|---|
| StreetFX SKU | injEVO9005 |
| SFX Item ID | 4243515 |
| Supplier Item Code | 4243515 |
| Manufacturer SKU | EVO9005 |
| Manufacturer UPC | 843115027964 |
| Alternative References | F-250/F-350, 6.4L |
Compatibility
| Application Data |
|
|---|
Loading compatibility information...
Keep shopping
More from Injen
