Wilwood
Wilwood HV Tandem M/C Kit w L/H Bracket & Prop Valve - 15/16in Bore Black-W/Push. - Early Mustang
wil261-14158-BK
A$862.56
Wilwood D52 Front Caliper Kit - Type III Ano 2.00 / 2.00in Piston 1.28in Rotor
Wilwood D52 Front Caliper Kit - Type III Ano 2.00 / 2.00in Piston 1.28in Rotor
Sale ends in Calculating...
A$920.39 A$1,079.77
Available from MFR.
This item is available from the manufacturer's distribution centre. The dispatch timeframe shown is an estimate based on historical order processing and release times for this part. This item is not held in our own warehouse, and actual dispatch timing may vary depending on manufacturer workload and logistics at the time of ordering.
We accept
Description
IMPORTANT NOTICE: Please see the application chart under the Charts & Guide tab above. Fits GM vehicles from 1968-96 that have factory D52 single piston calipers and 1.25 in. thick rotors. Will not fit later models using Metric D154 calipers. The caliper inlet port requires a 7/16-20 banjo bolt or a line adapter using crush washers as a seal. Stock rubber lines with a 7/16-20 banjo can be used. For later model vehicles that were originally equipped with metric connections, a new line kit will be required.
Wilwood's D52 Front Caliper Kit is a direct bolt-on 2 piston replacement for the factory original single calipers on many 1968-96 GM Passenger Vehicles and Trucks. Forged billet aluminum bodies, stainless steel pistons, and competition style high-temperature seals put an end to the rust, bore pitting, and seal failures that plague the OE caliper design. D52 calipers provide low-maintenance performance and a huge weight savings with high temperature reliability for the street and track. D52 calipers mount in the stock location over stock rotors, use the original style OE D52 brake pads and an OE 7/16-20 banjo bolt brake line mounting. Calipers can be used with most wheels that clear the OE calipers. The front calipers with 2.00” piston provide 6.28 square inches of piston area per caliper, in order to maintain the original front to rear brake bias and use of the OE master cylinder. Kits contain Wilwood’s hardened slide pins and BP-10 high friction pads. Matching rear calipers are also available for custom installations. Vehicles 1978 & Up (with M10-1.5 banjo bolts) will require new brake lines available below.
Part Type
Front Caliper Kit D52 / Big GM Natural Anodized
Specifications
- Product Attributes - UPC
- 889545012507
- Product Attributes - Brand
- Wilwood Disc Brakes
- Product Attributes - Notes
- Please see the application chart under the Charts & Guide tab above. Fits GM vehicles from 1968-96 that have factory D52 single piston calipers and 1.25 in. thick rotors. Will not fit later models using Metric D154 calipers. The caliper inlet port requires a 7/16-20 banjo bolt or a line adapter using crush washers as a seal. Stock rubber lines with a 7/16-20 banjo can be used. For later model vehicles that were originally equipped with metric connections, a new line kit will be required.
- Product Attributes - Quantity
- Sold as a kit.
- Product Attributes - Part Type
- Brake Calipers
- Product Attributes - Thread Size
- 7/16 in.-20
- Product Attributes - Caliper Logo
- Wilwood
- Product Attributes - Product Line
- Wilwood GM D52 Dual Piston Caliper Kits
- Product Attributes - Caliper Color
- Gray/Silver
- Product Attributes - Caliper Series
- D52 Dual Piston
- Product Attributes - Remanufactured
- No
- Product Attributes - Caliper Material
- Aluminum
- Product Attributes - Brackets Included
- No
- Product Attributes - Fittings Included
- No
- Product Attributes - Brake Pad Material
- Semi-metallic
- Product Attributes - Brake Pads Included
- Yes
- Product Attributes - Fitting Attachment 1
- Banjo
- Product Attributes - Piston Diameter (in.)
- 2.000
- Product Attributes - Rotor Thickness (in.)
- 1.280 in.
- Product Attributes - Caliper Piston Quantity
- Two
- Product Attributes - Parking Brake Provision
- No
- Product Attributes - Manufacturer's Part Number
- 140-11290
Reference Information
| Brand Name/s | Wilwood |
|---|---|
| StreetFX SKU | wil140-11290 |
| SFX Item ID | 4405733 |
| Supplier Item Code | 4405733 |
| Manufacturer SKU | 140-11290 |
| Manufacturer UPC | 889545012507 |
| Alternative References | d52, 2.00in, 1.28in |
Compatibility
| Application Data |
|
|---|
Loading compatibility information...
Keep shopping
More from Wilwood
Wilwood
Wilwood HV Tandem M/C Kit w L/H Bracket & Prop Valve - 1 1/8in Bore Black
wil261-13270-BK
A$764.43
Wilwood
Wilwood DPHA Front Caliper & Rotor Kit Drilled Honda / Acura w/ 262mm OE Rotor
wil140-12996-D
A$1,461.25
Wilwood
Wilwood Clutch Kit - Forged Adj. Pedal / MC / Slave - Swing Mount - 7:1
wil341-15170
A$545.50
