QA1 26 Series Monotube Shock Absorber - 9in Stroke - Schrader Valve - Dry Valving - Steel
QA1 26 Series Monotube Shock Absorber - 9in Stroke - Schrader Valve - Dry Valving - Steel
A$532.80
Limited Availability from MFR
Limited stock available from the manufacturer's distribution centre. The dispatch timeframe shown is an estimate based on historical orders of this part. This item is not held in our own warehouse, and availability and release timing may vary depending on manufacturer stock movements and processing at the time of ordering.
We accept
Description
Receive unparalleled racer repeatability with QA1 26 Series monotube shocks. These one-piece body designs are revalveable, repairable, and rebuildable to keep you consistent on the track. Tunable gas pressure lets you make quick adjustments to meet current track conditions—and they're non-fading, so your gas pressure remains unchanging, even on the roughest Circle Tracks! QA1 26 Series shocks are designed with large pistons for unmatched, stable valving and with centerless-ground, gun-drilled piston rods to eliminate rod flex and keep valving steady, again and again. And, you can run your 26 Series shocks upside-down to reduce unsprung weight. Increase your traction while making the rounds with QA1 26 Series steel monotube shocks, available in a variety of extended/collapsed lengths.
Product Overview
The 26 Series shock is a one piece monotube shock that is well suited for a variety of track conditions or as a traction shock in various applications. Constructed with a zinc plated body for corrosion resistance, this shock is a popular choice for modifieds, late models, super stocks and various other classes. Works best on rough tracks and as an easy-up shock on many dirt cars, and on bumpy asphalt tracks in all banking types. Made with a 2'' O.D. zinc plated steel monotube body and available with hyperscrew, sealed Hyperscrew (IMCA Legal) or Schrader valve configurations, the 26 Series shocks use deflective disc valving with either linear, digressive or linear/digressive valving. The hyperscrew equipped shocks have a threaded round port near the bearing end of the shock body. This hole is then sealed with a small screw that has an O-ring built into it, sealing the nitrogen gas pressure inside the shock. The gas pressure of the sealed hyperscrew configurations is only adjustable by QA1 and QA1 Authorized Rebuilders per sanctioning body, like IMCA, and track rules. With a Schrader valve you can easily adjust your gas pressure. Much like adding air to your car tires, the Schrader valve allows you to make ''on the fly'' gas pressure adjustments between heat races and features to adjust for varying track conditions. The 46 MM piston allows for maximum car control at all shaft velocities. They are racer rebuildable and revalveable for unparalleled repeatability. Made in the USA and 100% dyno tested and serialized.
Features and Benefits
- Racer rebuildable and revalveable
- Multiple valving curve and gas charging options
- Made in the USA
- Every QA1 shock is dyno-tested and serialized to guarantee peak performance
Product Details
| Body Diameter: | 2 |
|---|---|
| Body Material: | Carbon Steel |
| Boot Included: | No |
| Brand: | QA1 |
| Color: | Natural |
| Description: | QA1 26 Series Monotube Shock Absorber - 9in Stroke - Schrader Valve - Dry Valving - Steel |
| Finish: | Zinc Plated |
| Gas Charged: | Yes |
| Grade Type: | Performance |
| Includes Bump Stop: | No |
| Internal Construction Type: | Single Tube |
| Lower Mount Sleeve Inside Diameter: | 0.5 |
| Lower Mount Sleeve Overall Length: | 0.625 |
| Lower Mount Type: | Loop (Eyelet) Bearing |
| Manufacturer Part Number: | 26V9M-DRY |
| Mounting Hardware Included: | No |
| Part Number: | qap26V9M-DRY |
| Prop 65 - Short Label: | WARNING: Cancer and Reproductive Harm. www.P65Warnings.ca.gov |
| Prop 65 Yes/No: | Yes |
| Remote Reservoir: | No |
| Shaft Material: | Carbon Steel |
| Shock Stroke: | 9 |
| Title: | QA1 Shock Absorber 26V9M-DRY |
| Type: | Telescopic |
| UPC: | 806990068224 |
| Upper Mount Sleeve Inside Diameter: | 0.5 |
| Upper Mount Sleeve Overall Length: | 0.625 |
| Upper Mount Type: | Loop (Eyelet) Bearing |
Part Type
Suspension Shock Absorber
Features
- Every QA1 shock is dyno-tested and serialized to guarantee peak performance
- Made in the USA
- Multiple valving curve and gas charging options
- Racer rebuildable and revalveable
Specifications
- Product Attributes - Brand
- QA1
- Product Attributes - Manufacturer's Part Number
- 26V9M-DRY
- Product Attributes - Part Type
- Shocks and Struts
- Product Attributes - Product Line
- QA1 26 Series Steel Monotube Shocks
- Product Attributes - UPC
- 806990068224
- Product Attributes - Ride Height
- Custom
- Product Attributes - Extended Length (in.)
- 24.70
- Product Attributes - Collapsed Length (in.)
- 15.70
- Product Attributes - Internal Design
- Monotube
- Product Attributes - Adjustable Valving
- Yes
- Product Attributes - Gas Charged
- Yes
- Product Attributes - Upper Mount
- Eyelet
- Product Attributes - Lower Mount
- Eyelet
- Product Attributes - Boot Included
- No
- Product Attributes - Body Diameter (in.)
- 2.000
- Product Attributes - Remanufactured
- No
- Product Attributes - Quantity
- Sold individually.
- Product Attributes - Notes
- A linear nine inch stroke shock with a schrader valve and a valving of dry.
Reference Information
| Brand Name/s | Qa1 |
|---|---|
| StreetFX SKU | qap26V9M-DRY |
| SFX Item ID | 4092149 |
| Supplier Item Code | 4092149 |
| Manufacturer SKU | 26V9M-DRY |
| Manufacturer UPC | 806990068224 |
| Alternative References | qa1, QA1-26V9M-DRY, 9in |
Compatibility
| Application Data |
|
|---|
Loading compatibility information...
Keep shopping
More from Qa1
Qa1
QA1 Proma Star Series Coil-Over Shock Absorber - Single Adj. - 9in - 250lb/in - Alum
qapDS42-250
A$1,481.77
Qa1
QA1 65-79 Ford F100 Front Coil-Over Conversion Kit (3-5in Drop) - Single Adjustable (500lbs/in)
qap52620-S500
A$9,855.63