Mishimoto 21+ Ford Bronco High Mount Intercooler Kit - Silver
Mishimoto 21+ Ford Bronco High Mount Intercooler Kit - Silver
Sale ends in Calculating...
A$2,938.78 A$3,888.09
Available from MFR.
This item is available from the manufacturer's distribution centre. The dispatch timeframe shown is an estimate based on historical order processing and release times for this part. This item is not held in our own warehouse, and actual dispatch timing may vary depending on manufacturer workload and logistics at the time of ordering.
We accept
Description
The Ford Bronco has a heritage of tough, go-anywhere capability. The 2021+ Bronco is no different and deserves a cooling system that can stand up to the task. Here at Mishimoto, we never back down from a challenge, so we developed a high-mount intercooler to let your 2.3L or 2.7L EcoBoost breathe the coolest, densest air possible to help improve performance and overall efficiency. We relocated this high-mount intercooler to the upper grille to allow greater clearance, improved entry and exit angle, and protect your intercooler from obstacles on the trail. This relocation also frees up your front bumper for winches and other essential off-road accessories. We've also included new ducting to ensure ample airflow through the intercooler in its new location. The Mishimoto High-mount Intercooler features a 3.1 inch-thick core with precision TIG-welded cast aluminum end tanks. Compared to the factory tube-and-fin intercooler, durability against heat, pressure, and debris on the road or trail is significantly improved.----More durability is always a good thing, but it's even better when it's backed by performance. This high-mount intercooler boasts an increase of 49-percent core volume and 93-percent external fin surface area, which results in a reduction of outlet temperatures by 21-degrees (2.3L EcoBoost) / 15.5-degrees (2.7L EcoBoost) over stock. Combined, this generates gains of 4.5 hp and 10.8 lb-ft of torque for the 2.3L EcoBoost and 8.0 hp and 10.2 lb-ft torque for the 2.7L EcoBoost. We saw exceptional improvement in our trail simulation heat-soak testing where, after 6 back-to-back dyno runs, we still saw outlet temperatures 20-degrees cooler than stock. Functionality of adaptive cruise control is retained utilizing a relocation bracket and 360-degrees cameras are unaffected. As with all our products the Mishimoto 2021+ Ford Bronco High-mount Intercooler is backed by our signature Mishimoto Lifetime Warranty.
Product Overview
The Ford Bronco has a heritage of tough, go-anywhere capability. The 2021+ Bronco is no different and deserves a cooling system that can stand up to the task. Here at Mishimoto, we never back down from a challenge, so we developed a high-mount intercooler to let your 2.3L or 2.7L EcoBoost breathe the coolest, densest air possible to help improve performance and overall efficiency. We relocated this high-mount intercooler to the upper grille to allow greater clearance, improved entry and exit angle, and protect your intercooler from obstacles on the trail. This relocation also frees up your front bumper for winches and other essential off-road accessories. We've also included new ducting to ensure ample airflow through the intercooler in its new location. The Mishimoto High-mount Intercooler features a 3.1 inch-thick core with precision TIG-welded cast aluminum end tanks. Compared to the factory tube-and-fin intercooler, durability against heat, pressure, and debris on the road or trail is significantly improved.----More durability is always a good thing, but it’s even better when it’s backed by performance. This high-mount intercooler boasts an increase of 49-percent core volume and 93-percent external fin surface area, which results in a reduction of outlet temperatures by 21-degrees (2.3L EcoBoost) / 15.5-degrees (2.7L EcoBoost) over stock. Combined, this generates gains of 4.5 hp and 10.8 lb-ft of torque for the 2.3L EcoBoost and 8.0 hp and 10.2 lb-ft torque for the 2.7L EcoBoost. We saw exceptional improvement in our trail simulation heat-soak testing where, after 6 back-to-back dyno runs, we still saw outlet temperatures 20-degrees cooler than stock. Functionality of adaptive cruise control is retained utilizing a relocation bracket and 360-degrees cameras are unaffected. As with all our products the Mishimoto 2021+ Ford Bronco High-mount Intercooler is backed by our signature Mishimoto Lifetime Warranty.
Features and Benefits
- Direct fit for 2021+ Ford Bronco 2.3/2.7L
- Includes adaptive cruise control relocation mount and does not interfere with 360-degree cameras
- Available in stealth black or sleek silver powdercoat
- Mishimoto Lifetime Warranty
- Relocates intercooler above stock location, freeing up space for winches, lights, and other essential front-mounted off-road accessories
- 21-degrees F (2.3L EcoBoost) / 15.5-degrees F (2.7L EcoBoost) reduction in outlet temperature over stock intercooler after single dyno run, and 20-degrees F (2.3L & 2.7L EcoBoost) cooler than stock after 6 consecutive dyno runs
- Dyno-proven max gains of 4.5 hp and 10.8 lb-ft torque (2.3L EcoBoost) / 8.0 hp and 10.2 lb-ft torque (2.7L EcoBoost)
- Front-mount relocation allows for greater clearance, entry and exit angle, and keeps your intercooler protected from obstacles on the trail
- 49-percent increase in core volume
- 93-percent increase in fin surface area
- 3.1-in thick intercooler design for maximum flow
- Optimal core design for maximum cooling efficiency with minimal pressure drop
- All-aluminum, TIG-welded construction
- Durable bar-and-plate core for superior durability and performance
- Cast aluminum end tanks are precision TIG welded to the core for increased pressure tolerance and reliability
Product Details
| Description: | Mishimoto 21+ Ford Bronco High Mount Intercooler Kit - Silver |
|---|---|
| OptionLabel: | Silver |
| Part Number: | misMMINT-BR-21HSL |
| SellingPoint01: | Direct fit for 2021+ Ford Bronco 2.3/2.7L |
| SellingPoint02: | Relocates intercooler for better airflow with winches, lights, and other off-road accessories |
| SellingPoint03: | Dyno-proven max gains of 4.5 hp and 10.8 lb-ft (2.3L EcoBoost) / 8.0 hp and 10.2 lb-ft torque (2.7L EcoBoost) |
| SellingPoint04: | Up to 21-degree reduction in outlet temperature over stock intercooler |
| SellingPoint05: | Included ducting provides ample airflow through core |
| SellingPoint06: | Detachable inlet for easy installation |
| SellingPoint07: | Allows for improved clearance, entry and exit angle, and protects intercooler from obstacles |
| SellingPoint08: | Optimal core design for maximum cooling efficiency with minimal pressure drop |
| SellingPoint09: | Durable bar-and-plate core for superior durability and performance |
| SellingPoint10: | Cast aluminum end tanks and serrated adapters for increased pressure tolerance and reliability |
| SellingPoint11: | 49-percent increase in core volume |
| SellingPoint12: | 93-percent increase in fin surface area |
| SellingPoint13: | Includes adaptive cruise control relocation mount and does not interfere with 360-degree cameras |
| SellingPoint14: | Patent Pending |
| SellingPoint15: | Mishimoto Lifetime Warranty |
| TechSpec Applications: | 2021+ Ford Bronco 2.3L EcoBoost--2021+ Ford Bronco 2.7L EcoBoost |
| TechSpec Centerline Radius: | N/A |
| TechSpec Chassis Codes: | N/A |
| TechSpec Core Height (in): | 8.8 |
| TechSpec Core Length (in): | 21.26 |
| TechSpec Core Thickness (in): | 3.15 |
| TechSpec Core Type: | Bar-and-Plate |
| TechSpec Engine Codes: | 2.3 EcoBoost--2.7 EcoBoost |
| TechSpec Includes: | (1) Mishimoto High-Mount Intercooler--(2) Silicone Couplers--(2) CNC-Machined Intercooler Pipe Adapters--(4) Worm gear clamps--(2) Grille Shutter Connectors--Intercooler Ducting--Mounting Brackets and Hardware--Mishimoto Lifetime Warranty |
| TechSpec Inlet (in): | 3 |
| TechSpec Installation Notes: | N/A |
| TechSpec Maximum Recommended Boost Pressure (PSI): | N/A |
| TechSpec Maximum Recommended Horsepower: | N/A |
| TechSpec Note: | Please note: Adaptive cruise control may function to a lesser degree compared to stock interooler setup.----Does not fit Raptor Bronco with 3.0L EcoBoost |
| TechSpec Outlet (in): | 3 |
| TechSpec Overall Height (in): | 18.6 |
| TechSpec Overall Length (in): | 35.82 |
| TechSpec Overall Width (in): | 6.15 |
| TechSpec Pipe Diameter: | N/A |
| TechSpec Pipe Length: | N/A |
| TechSpec Pipe Shape: | N/A |
| TechSpec Weight (lbs): | N/A |
Part Type
Intercooler Kit
Features
- Dyno-proven max gains of 4.5 hp and 10.8 lb-ft (2.3L EcoBoost) / 8.0 hp and 10.2 lb-ft torque (2.7L EcoBoost)
- Relocates intercooler for better airflow with winches, lights, and other off-road accessories
- Up to 21-degree reduction in outlet temperature over stock intercooler
Specifications
- Product Attributes - Brand
- Mishimoto
- Product Attributes - Manufacturer's Part Number
- MMINT-BR-21HSL
- Product Attributes - Part Type
- Intercoolers
- Product Attributes - Product Line
- Mishimoto Intercoolers
- Product Attributes - UPC
- 840197712986
- Product Attributes - Intercooler Core Type
- Air-to-air
- Product Attributes - Intercooler Material
- Aluminum
- Product Attributes - Intercooler Color
- Gray/Silver
- Product Attributes - Intercooler Width Range (in.)
- 6.00-6.99 in.
- Product Attributes - Intercooler Height Range (in.)
- 18.00-18.99 in.
- Product Attributes - Intercooler Width (in.)
- 35.82 in.
- Product Attributes - Intercooler Height (in.)
- 18.60 in.
- Product Attributes - Intercooler Depth (in.)
- 3.15 in.
- Product Attributes - Intercooler Inlet
- Factory quick-disconnect
- Product Attributes - Intercooler Inlet Size
- 3.000 in.
- Product Attributes - Intercooler Outlet
- Factory quick-disconnect
- Product Attributes - Intercooler Outlet Size
- 3.000 in.
- Product Attributes - Intercooler Mounting Brackets Included
- Yes
- Product Attributes - Intercooler Pipe Included
- No
- Product Attributes - Aftercooler Included
- No
- Product Attributes - Aftercooler Remote Water Reservoir Included
- No
- Product Attributes - Remote Mount Electric Water Pump Included
- No
- Product Attributes - Quantity
- Sold as a kit.
Reference Information
| Brand Name/s | Mishimoto |
|---|---|
| StreetFX SKU | misMMINT-BR-21HSL |
| SFX Item ID | 4051076 |
| Supplier Item Code | 4051076 |
| Manufacturer SKU | MMINT-BR-21HSL |
| Manufacturer UPC | 840197712986 |
| Alternative References | mio-mmintbr21hsl, MIMMMINT-BR-21HSL |
Brochures
Compatibility
Loading compatibility information...
Keep shopping
More from Mishimoto
On sale
On sale
Mishimoto
Mishimoto 01-07 Subaru WRX / WRX STI Black Silicone Induction Hose
misMMHOSE-SUB-IHBK
A$578.64 A$664.51
Mishimoto
Mishimoto Dodge/Chrysler/Jeep Hemi 5.7L/6.1L/6.4L Racing Thermostat
misMMTS-JED-06L
A$125.19
On sale
Mishimoto
Mishimoto 01-07 Subaru WRX and STi Manual Aluminum Radiator
misMMRAD-WRX-01
A$786.55 A$851.61