MagnaFlow 2017+ Dodge Charger 409 SS Polished 3in Quad Tips Cat-Back Exhaust
MagnaFlow 2017+ Dodge Charger 409 SS Polished 3in Quad Tips Cat-Back Exhaust
A$3,558.56
Available from MFR.
This item is available from the manufacturer's distribution centre. The dispatch timeframe shown is an estimate based on historical order processing and release times for this part. This item is not held in our own warehouse, and actual dispatch timing may vary depending on manufacturer workload and logistics at the time of ordering.
We accept
Description
The MagnaFlow Dodge Charger Competition Series Cat-Back Performance Exhaust System brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we're so well known for. This exhaust kit is designed to enhance your 5.7L, 6.2L, 6.4L Dodge Charger with dyno-proven performance made possible thanks to fast-flowing mandrel bent 3in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 4.5in. Polished Welded-On Double Wall Angle Cut Folded Edge tips featuring a sporty finish. The exhaust system's cat-back layout replaces your ride's exhaust system from near the catalytic converter on back. Exhaust system 19371 is engineered to make your vehicle's engine produce Aggressive exterior and Moderate interior sound levels, befitting its competition-oriented design. 19371's direct-fit design makes installation a breeze thanks to the use of advanced 3D scanning techniques. This performance exhaust system is made of 100% durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow's limited lifetime warranty. Please check to ensure compliance with local noise regulations.
Product Overview
The MagnaFlow 2015-2023 Dodge Charger Competition Series Cat-Back Performance Exhaust System 19371 brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we're so well known for. This exhaust kit is designed to enhance your 5.7L, 6.2L, 6.4L 2015-2023 Dodge Charger with dyno-proven performance made possible thanks to fast-flowing mandrel bent 3in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 4.5in. Polished Welded-On Double Wall Angle Cut Folded Edge tips featuring a sporty finish. The exhaust system's cat-back layout replaces your ride's exhaust system from near the catalytic converter on back. Exhaust system 19371 is engineered to make your vehicle's engine produce Aggressive exterior and Moderate interior sound levels, befitting its competition-oriented design. 19371's direct-fit design makes installation a breeze thanks to the use of advanced 3D scanning techniques. This performance exhaust system is made of 100% durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow's limited lifetime warranty. Please check to ensure compliance with local noise regulations.
Features and Benefits
- Crafted From 409 Stainless Steel With All Mandrel-Bent Tubing
- Increased Horsepower And Torque
- Aggressive Exterior Sound
Product Details
| Anticipated Ship Out Time: | Approximately 1-2 Days |
|---|---|
| Attachment Style: | Clamp-On |
| Attachment Type: | Clamp-On |
| Catalytic Converter Quantity: | 0 |
| Clamp Type: | Band Clamp |
| Clamping Type: | Band Clamp |
| Clamps Included: | Yes |
| Color/Finish: | Stainless |
| Description: | Competition Series Stainless Cat-Back System |
| Exhaust Inlet Connection Type: | Clamp-On |
| Exhaust Pipe Material: | Stainless |
| Exhaust Tip Connection: | Welded-On |
| Exhaust Tip Cut: | Angle Cut |
| Exhaust Tip Diameter: | 4.5 |
| Exhaust Tip Edge: | Folded Edge |
| Exhaust Tip Finish: | Polished |
| Exhaust Tip Intercooled: | No |
| Exhaust Tip Length: | 4.75 |
| Exhaust Tip Material: | Stainless Steel |
| Exhaust Tip Quantity: | 2 |
| Exhaust Tip Resonated: | No |
| Exhaust Tip Shape: | Round |
| Exhaust Tip Wall: | Double Wall |
| Exhaust Type: | Cat-Back |
| Exit Location: | Dual Split Rear |
| Exit Position: | Dual Split Rear |
| Exit Quantity: | Dual |
| Exit Style: | Dual Split Rear |
| Finish: | Stainless |
| Gasket Included: | No |
| Gasket Or Seal Included: | No |
| Hangers Included: | Yes |
| Inlet Connection Type: | Clamp-On |
| Inlet Inside Diameter: | 3.000 in. |
| Inlet Type: | Clamp-On |
| Main Piping Diameter: | 3.000 in. |
| Material: | Stainless |
| Mounting Bracket Included: | No |
| Muffler Body Diameter: | 5.000 in. x 5.000 in. |
| Muffler Body Finish: | Polished |
| Muffler Body Height: | 5.000 in. |
| Muffler Body Length: | 11 |
| Muffler Body Material: | Stainless Steel |
| Muffler Body Shape: | Round |
| Muffler Body Width: | 8 |
| Muffler Configuration: | Center/Center |
| Muffler Count: | 2 |
| Muffler Finish: | Brushed |
| Muffler Inlet Diameter: | 2.875 in. |
| Muffler Material: | Stainless Steel |
| Muffler Outlet Diameter: | 2.875 in. |
| Muffler Overall Length: | 14.000 in. |
| Muffler Quantity: | 2 |
| Muffler Type: | Straight-Through |
| Part Number: | mag19371 |
| Pipe Material: | Stainless Steel |
| Prop 65 Y/N: | No |
| Recommended Use: | Performance |
| Series: | Competition |
| Sound Level: | Aggressive |
| Subtitle: | Cat-Back Performance Exhaust System |
| Subtitles: | Cat-Back |
| System Type: | Cat Back |
| Tail Pipe Diameter: | 3.000 in. |
| Tip Diameter: | 4.500 in. |
| Tip Finish: | Polished |
| Tip Length: | 4.750 in. |
| Tip Material: | Stainless Steel |
| Tip Quantity: | 2 |
| Tip Shape: | Round |
| Tip Type: | Double Wall |
| Title: | MagnaFlow 2015-2023 Dodge Charger Competition Series Cat-Back Performance Exhaust System |
| Tubing Diameter: | 3.000 in. |
| Type: | Cat-Back |
| Valve Included: | No |
| Valve Type: | None |
| WARNING CA Proposition 65: | No |
| Warranty: | Lifetime |
Part Type
Exhaust System Kit
Features
- Aggressive exterior sound
- Crafted From 409 Stainless Steel With All Mandrel-Bent Tubing
- Increased Horsepower And Torque
Specifications
- Product Attributes - Brand
- MagnaFlow
- Product Attributes - Manufacturer's Part Number
- 19371
- Product Attributes - Part Type
- Exhaust Systems
- Product Attributes - Product Line
- MagnaFlow Competition Series Exhaust Systems
- Product Attributes - UPC
- 888563072500
- Product Attributes - System Material
- 409 stainless steel
- Product Attributes - System Style
- Cat-back
- Product Attributes - Exhaust Type
- Dual
- Product Attributes - Exit Location
- Split rear
- Product Attributes - System Finish
- Natural
- Product Attributes - Catalytic Converter(s) Included
- No
- Product Attributes - Intermediate Pipe Diameter (in.)
- 3.00 in.
- Product Attributes - Muffler Included
- Yes
- Product Attributes - Muffler Quantity
- Two
- Product Attributes - Muffler Configuration
- Single inlet/Single outlet
- Product Attributes - Muffler Style
- Perforated tube with packing
- Product Attributes - Muffler Material
- 409 stainless steel
- Product Attributes - Muffler Finish
- Polished
- Product Attributes - Hardware Included
- Yes
- Product Attributes - Tailpipe Diameter (in.)
- 3.00 in.
- Product Attributes - Tip Included
- Yes
- Product Attributes - Tip Outlet Size (in.)
- 4.50
- Product Attributes - Tip Quantity
- 2
- Product Attributes - Tip Shape
- Round
- Product Attributes - Tip Cut
- Slant
- Product Attributes - Tip Edge Style
- Rolled edge, double-wall
- Product Attributes - Tip Material
- 409 stainless steel
- Product Attributes - Tip Color
- Polished
- Product Attributes - Remanufactured
- No
- Product Attributes - Quantity
- Sold as a kit.
- Product Attributes - Notes
- Depending on vehicle configuration, some modifications may be required. See installation instructions for details, if applicable.
- Product Attributes - Special Attention
- It is illegal to install parts or components that bypass, defeat, or render inoperative the manufacturers’ technology and design necessary to reduce vehicle emissions to meet state and federal Clean Air Act standards.
Reference Information
| Brand Name/s | Magnaflow |
|---|---|
| StreetFX SKU | mag19371 |
| SFX Item ID | 4284256 |
| Supplier Item Code | 4284256 |
| Manufacturer SKU | 19371 |
| Manufacturer UPC | 888563072500 |
| Alternative References | mpe-19371, MFL19371, 3in |
Brochures
Compatibility
| Application Data |
|
|---|
Loading compatibility information...
Keep shopping
