MagnaFlow 15-17 Ford F-150 3.5L Direct Fit Converter
MagnaFlow 15-17 Ford F-150 3.5L Direct Fit Converter
A$2,376.46
Available from MFR.
This item is available from the manufacturer's distribution centre. The dispatch timeframe shown is an estimate based on historical order processing and release times for this part. This item is not held in our own warehouse, and actual dispatch timing may vary depending on manufacturer workload and logistics at the time of ordering.
We accept
Description
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5551466. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2015-2017 Ford F-150. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Product Overview
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5551466. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2015-2017 Ford F-150. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Features and Benefits
- Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Durable 308 stainless steel MIG welds
- Expertly Crafted To Replicate OEM Like Flow Dynamics; Maintaining Factory Performance And Fuel Efficiency
- Simplifies Installation w/Essential Gaskets And Hardware Being Included In The Box
- Your Trusted Source For CARB-Compliant Catalytic Converters; Providing Assurance Of Genuine Compliance
Product Details
| Air Tube Count: | 0 |
|---|---|
| Body Material: | Stainless Steel |
| Body Type: | Spun |
| CARB Executive Order Number: | D-193-144 |
| California Air Resources Board (CARB) Certified: | Yes |
| Clamps Included: | No |
| Core Substrate Material: | Ceramic |
| Description: | California Direct-Fit Catalytic Converter |
| Finish: | Stainless Steel |
| Grade Type: | Regular |
| Hangers Included: | No |
| Heat Shield Attached: | No |
| Inlet Gasket Included: | No |
| Inlet Mounting Hardware Included: | No |
| Inlet Type: | Bolt-On |
| Material: | Stainless Steel |
| Outlet Gasket Included: | No |
| Outlet Mounting Hardware Included: | No |
| Outlet Type: | Clamp-On |
| Overall Length: | 27.250 in. |
| Oxygen Sensor Location: | Pre and Post Converter |
| Part Number: | mag5551466 |
| Prop 65 Y/N: | No |
| Sensor Port Count: | 2 |
| Series: | California |
| Substrate Material: | Ceramic |
| Subtitle: | California / CARB Compliant |
| Title: | MagnaFlow 2015-2017 Ford F-150 California Grade CARB Compliant Direct-Fit Catalytic Converter |
| Tube Material: | Stainless Steel |
| Type: | Direct-Fit |
| Universal Or Specific Fit: | Specific |
| WARNING CA Proposition 65: | No |
Features
- Durable 308 stainless steel MIG welds
- Expertly Crafted To Replicate OEM Like Flow Dynamics; Maintaining Factory Performance And Fuel Efficiency
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
- Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
- OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
- Simplifies Installation w/Essential Gaskets And Hardware Being Included In The Box
- Simplifies installation with essential gaskets and hardware being included in the box
- Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Your Trusted Source For CARB-Compliant Catalytic Converters; Providing Assurance Of Genuine Compliance
Specifications
- Air Tube Count:
- 0
- Body Material:
- Stainless Steel
- Body Type:
- Spun
- CARB Executive Order Number:
- D-193-144
- California Air Resources Board (CARB) Certified:
- Yes
- Clamps Included:
- No
- Core Substrate Material:
- Ceramic
- Description:
- California Direct-Fit Catalytic Converter
- Finish:
- Stainless Steel
- Grade Type:
- Regular
- Hangers Included:
- No
- Heat Shield Attached:
- No
- Inlet Gasket Included:
- No
- Inlet Mounting Hardware Included:
- No
- Inlet Type:
- Bolt-On
- Material:
- Stainless Steel
- Outlet Gasket Included:
- No
- Outlet Mounting Hardware Included:
- No
- Outlet Type:
- Clamp-On
- Overall Length:
- 27.250 in.
- Oxygen Sensor Location:
- Pre and Post Converter
- Part Number:
- mag5551466
- Prop 65 Y/N:
- No
- Sensor Port Count:
- 2
- Series:
- California
- Substrate Material:
- Ceramic
- Subtitle:
- California / CARB Compliant
- Title:
- MagnaFlow 2015-2017 Ford F-150 California Grade CARB Compliant Direct-Fit Catalytic Converter
- Tube Material:
- Stainless Steel
- Type:
- Direct-Fit
- Universal Or Specific Fit:
- Specific
- WARNING CA Proposition 65:
- No
Reference Information
| Brand Name/s | Magnaflow |
|---|---|
| StreetFX SKU | mag5551466 |
| SFX Item ID | 4290344 |
| Supplier Item Code | 4290344 |
| Manufacturer SKU | 5551466 |
| Manufacturer UPC | 888563156354 |
| Alternative References | MFL5551466, F-150, 3.5L |
Compatibility
Loading compatibility information...
Keep shopping
