MagnaFlow Universal Catalytic Converter 3/2 Single / Dual with O2
MagnaFlow Universal Catalytic Converter 3/2 Single / Dual with O2
A$466.01
Last Available from MFR.
LAST ONE AVAILABLE from the manufacturer's distribution centre. Once sold, this item may not be immediately available again. The dispatch timeframe shown is an estimate based on historical orders for this part and is dependent on the manufacturer releasing the final available unit.
We accept
Description
IMPORTANT NOTICE: Universal fit catalytic converters may require the use of welding, cutting, and tube-bending equipment for installation. Tuning may be required when changing catalytic converters.
MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51647 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Product Overview
MagnaFlow specializes in superior catalytic converter and exhaust technology and has spent the past 30+ years earning its reputation as a global market leader. American engineered and manufactured, MagnaFlow Catalytic Converters combine efficient industrial design to produce a product that exceeds, rather than meets, the highest standards of product performance and efficiency in the industry. MagnaFlow uses both Ceramic and Metallic substrates with different combinations of cell density and wall thickness to meet vehicle specific requirements.
MagnaFlow Universal Catalytic Converters form the basic building blocks for a comprehensive line of direct-fit applications.
The main benefit of the universal catalytic converter is that one unit may cover a wide variety of vehicle makes and models. Installing universal converters often requires the use of welding, cutting and tube bending equipment that is readily available to most professional installers.
All Federal catalytic converters meet EPA requirements. Federal Catalytic Converters are not legal for sale, installation or use on vehicles registered in the state of California.
All California State Catalytic converters are CARB compliant. Converters in this catalog are based on Executive Orders issued by the California Air Resource Board and must be used in accordance with this information. In California, it is illegal to select a catalytic converter for installation based solely on vehicle weight and engine size.
* Stainless steel construction
* Formulated for Gas and Diesel Applications
Features and Benefits
- Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Compact/Lightweight Construction Enables Installation In Confined Areas/Welding Is Required
- Your Trusted Source For EPA-Compliant Catalytic Converters
- High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
- Durable 308 Stainless Steel Mig Welds
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Compact, lightweight construction enables installation in confined areas, welding is required
Product Details
| 2899: | No |
|---|---|
| Air Tube Adaptable: | No |
| Air Tube Count: | 0 |
| Body Height: | 3.75 |
| Body Length: | 12 |
| Body Material: | Stainless Steel |
| Body Shape: | Oval |
| Body Type: | Clam-Shell |
| Body Width: | 6.375 in. |
| CARB Executive Order Number: | Not Applicable |
| California Air Resources Board (CARB) Certified: | No |
| California Air Resources Board Approved: | No |
| Catalytic Converter Air Tube Adapter: | No |
| Catalytic Converter Body Material: | Stainless |
| Catalytic Converter Format: | Pre-Catalytic Converter and Main Catalytic Converter |
| Catalytic Converter Overall Length: | 16 |
| Catalytic Converter Oxygen Sensor Location: | Pre Converter |
| Clamp Included: | No |
| Clamps Included: | No |
| Converter Quantity: | 1 |
| Core Substrate Material: | Ceramic |
| Description: | OEM Grade Universal Catalytic Converter-2.00in. |
| Finish: | Stainless Steel |
| Gasket Included: | No |
| Grade Type: | Regular |
| Hangers Included: | No |
| Heat Shield Attached: | Yes |
| Heat Shield Included: | Yes |
| Heat Shield Material: | Aluminized Steel |
| Inlet Attachment: | Weld-On |
| Inlet Diameter: | 2 |
| Inlet Gasket Included: | No |
| Inlet Inside Diameter: | 2.000 in. |
| Inlet Mounting Hardware Included: | No |
| Inlet Orientation: | Straight |
| Inlet Quantity: | 1 |
| Inlet Type: | Weld-On |
| Main Piping Diameter: | 3 |
| Material: | Stainless Steel |
| Mounting Hardware Included: | No |
| Outlet Attachment: | Weld-On |
| Outlet Diameter: | 3 |
| Outlet Gasket Included: | No |
| Outlet Inside Diameter: | 2 |
| Outlet Mounting Hardware Included: | No |
| Outlet Orientation: | Straight |
| Outlet Outside Diameter: | 3 |
| Outlet Quantity: | 2 |
| Outlet Type: | Weld-On |
| Overall Length: | 16 |
| Oxygen Sensor Location: | Pre Converter |
| Part Number: | mag51647 |
| Pipe Material: | Stainless Steel |
| Prop 65 Y/N: | No |
| Recommended Use: | Converter |
| Sensor Port Count: | 1 |
| Series: | OEM Grade |
| Substrate Material: | Ceramic |
| Subtitle: | Federal / EPA Compliant Universal Catalytic Converter |
| Title: | MagnaFlow OEM Grade Federal / EPA Compliant Universal Catalytic Converter 51647 |
| Tube Material: | Stainless Steel |
| Type: | Universal |
| Universal Or Specific Fit: | Universal |
| WARNING CA Proposition 65: | No |
Part Type
Catalytic Converter
Features
- Compact, lightweight construction enables installation in confined areas, welding is required
- Compact/Lightweight Construction Enables Installation In Confined Areas/Welding Is Required
- Durable 308 stainless steel MIG welds
- Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
- Your Trusted Source For EPA-Compliant Catalytic Converters
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
Specifications
- Product Attributes - Brand
- MagnaFlow
- Product Attributes - Manufacturer's Part Number
- 51647
- Product Attributes - Part Type
- Catalytic Converters
- Product Attributes - Product Line
- MagnaFlow Universal Catalytic Converters
- Product Attributes - UPC
- 841380078728
- Product Attributes - Inlet Quantity
- 2
- Product Attributes - Inlet Diameter (in.)
- 2.00 in.
- Product Attributes - Converter Inlet Attachment
- Slip fit
- Product Attributes - Outlet Quantity
- 1
- Product Attributes - Outlet Diameter (in.)
- 3.00 in.
- Product Attributes - Converter Outlet Attachment
- Slip fit
- Product Attributes - Converter Case Material
- Stainless steel
- Product Attributes - Converter Substrate Material
- Ceramic honeycomb
- Product Attributes - Converter Overall Length (in.)
- 16.00
- Product Attributes - Converter Overall Width (in.)
- 6.38
- Product Attributes - Converter Style
- 3-way
- Product Attributes - Remanufactured
- No
- Product Attributes - AIR Tube
- No
- Product Attributes - Heat Shield
- Yes
- Product Attributes - Quantity
- Sold individually.
- Product Attributes - Notes
- Universal fit catalytic converters may require the use of welding, cutting, and tube-bending equipment for installation. Tuning may be required when changing catalytic converters.
Reference Information
| Brand Name/s | Magnaflow |
|---|---|
| StreetFX SKU | mag51647 |
| SFX Item ID | 4288552 |
| Supplier Item Code | 4288552 |
| Manufacturer SKU | 51647 |
| Manufacturer UPC | 841380078728 |
| Alternative References | mpe-51647, MFL51647 |
Compatibility
| Application Data |
|
|---|
Loading compatibility information...
Keep shopping
