Magnaflow 96-97 Mazda B2300 2.3L Direct Fit Converter
Magnaflow 96-97 Mazda B2300 2.3L Direct Fit Converter
A$969.13
Last Available from MFR.
LAST ONE AVAILABLE from the manufacturer's distribution centre. Once sold, this item may not be immediately available again. The dispatch timeframe shown is an estimate based on historical orders for this part and is dependent on the manufacturer releasing the final available unit.
We accept
Description
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 4481188. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 1996-1997 Mazda B2300 and interchanges with OE parts ZZMA-20-500A and ZZMB-20-500A, among others. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Product Overview
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 4481188. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 1996-1997 Mazda B2300 and interchanges with OE parts ZZMA-20-500A and ZZMB-20-500A, among others. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Features and Benefits
- Expertly Crafted To Replicate OEM Like Flow Dynamics; Maintaining Factory Performance And Fuel Efficiency
- Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Simplifies Installation w/Essential Gaskets And Hardware Being Included In The Box
- Your Trusted Source For CARB-Compliant Catalytic Converters; Providing Assurance Of Genuine Compliance
- Mandrel Bent Tubing Retains OEM-Like Design And Geometry; Ensuring Smooth Exhaust Flow For Peak Fuel Economy Operation
- OE-Sized Barbed Exhaust Hangers Made From Corrosion-Resistant 410 Stainless Steel; Designed To Reduce Noise/Vibration
- High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
- Durable 308 Stainless Steel MIG Welds
- Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
- OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
Product Details
| Air Tube Adaptable: | No |
|---|---|
| Body Height: | 4 |
| Body Length: | 11.25 |
| Body Material: | Stainless Steel |
| Body Shape: | Round |
| Body Type: | Spun |
| Body Width: | 4.000 in. |
| CARB Executive Order Number: | D-193-139 |
| California Air Resources Board (CARB) Certified: | Yes |
| Clamps Included: | No |
| Core Substrate Material: | Ceramic |
| Description: | California Direct-Fit Catalytic Converter |
| Finish: | Stainless Steel |
| Grade Type: | Regular |
| Hangers Included: | Yes |
| Heat Shield Attached: | No |
| Inlet Inside Diameter: | 2.000 in. |
| Inlet Quantity: | 1 |
| Inlet Type: | Bolt-On |
| Material: | Stainless Steel |
| Outlet Inside Diameter: | 2.25 |
| Outlet Quantity: | 1 |
| Outlet Type: | Bolt-On |
| Overall Length: | 47.125 |
| Oxygen Sensor Location: | Pre and Post Converter |
| Part Number: | mag4481188 |
| Prop 65 Y/N: | No |
| Sensor Port Count: | 2 |
| Series: | California |
| Substrate Material: | Ceramic |
| Subtitle: | California / CARB Compliant |
| Title: | MagnaFlow 1996-1997 Mazda B2300 California Grade CARB Compliant Direct-Fit Catalytic Converter |
| Tube Material: | Stainless Steel |
| Type: | Direct-Fit |
| Universal Or Specific Fit: | Specific |
| WARNING CA Proposition 65: | No |
Features
- Durable 308 stainless steel MIG welds
- Expertly Crafted To Replicate OEM Like Flow Dynamics; Maintaining Factory Performance And Fuel Efficiency
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
- Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
- Mandrel Bent Tubing Retains OEM-Like Design And Geometry; Ensuring Smooth Exhaust Flow For Peak Fuel Economy Operation
- OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
- OE-Sized Barbed Exhaust Hangers Made From Corrosion-Resistant 410 Stainless Steel; Designed To Reduce Noise/Vibration
- Simplifies Installation w/Essential Gaskets And Hardware Being Included In The Box
- Simplifies installation with essential gaskets and hardware being included in the box
- Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Your Trusted Source For CARB-Compliant Catalytic Converters; Providing Assurance Of Genuine Compliance
Specifications
- Air Tube Adaptable:
- No
- Body Height:
- 4
- Body Length:
- 11.25
- Body Material:
- Stainless Steel
- Body Shape:
- Round
- Body Type:
- Spun
- Body Width:
- 4.000 in.
- CARB Executive Order Number:
- D-193-139
- California Air Resources Board (CARB) Certified:
- Yes
- Clamps Included:
- No
- Core Substrate Material:
- Ceramic
- Description:
- California Direct-Fit Catalytic Converter
- Finish:
- Stainless Steel
- Grade Type:
- Regular
- Hangers Included:
- Yes
- Heat Shield Attached:
- No
- Inlet Inside Diameter:
- 2.000 in.
- Inlet Quantity:
- 1
- Inlet Type:
- Bolt-On
- Material:
- Stainless Steel
- Outlet Inside Diameter:
- 2.25
- Outlet Quantity:
- 1
- Outlet Type:
- Bolt-On
- Overall Length:
- 47.125
- Oxygen Sensor Location:
- Pre and Post Converter
- Part Number:
- mag4481188
- Prop 65 Y/N:
- No
- Sensor Port Count:
- 2
- Series:
- California
- Substrate Material:
- Ceramic
- Subtitle:
- California / CARB Compliant
- Title:
- MagnaFlow 1996-1997 Mazda B2300 California Grade CARB Compliant Direct-Fit Catalytic Converter
- Tube Material:
- Stainless Steel
- Type:
- Direct-Fit
- Universal Or Specific Fit:
- Specific
- WARNING CA Proposition 65:
- No
Reference Information
| Brand Name/s | Magnaflow |
|---|---|
| StreetFX SKU | mag4481188 |
| SFX Item ID | 4289723 |
| Supplier Item Code | 4289723 |
| Manufacturer SKU | 4481188 |
| Manufacturer UPC | 888563132914 |
| Alternative References | MFL4481188, B2300, 2.3L |
Compatibility
Loading compatibility information...
Keep shopping
