MagnaFlow Sys Cat-Back 05-09 Mustang M-pack Axle-Back
MagnaFlow Sys Cat-Back 05-09 Mustang M-pack Axle-Back
A$1,999.60
Last Available from MFR.
LAST ONE AVAILABLE from the manufacturer's distribution centre. Once sold, this item may not be immediately available again. The dispatch timeframe shown is an estimate based on historical orders for this part and is dependent on the manufacturer releasing the final available unit.
We accept
Description
The MagnaFlow Ford Mustang Competition Series Axle-Back Performance Exhaust System brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we're so well known for. This exhaust kit is designed to enhance your 4.6L, 5.4L Ford Mustang with dyno-proven performance made possible thanks to fast-flowing mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 3.5in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips featuring a sporty finish. The exhaust system's axle-back layout replaces your ride's exhaust system from near the rear axle on back. Exhaust system 16793 is engineered to make your vehicle's engine produce Aggressive exterior and Moderate interior sound levels, befitting its competition-oriented design. 16793's direct-fit design makes installation a breeze thanks to the use of advanced 3D scanning techniques. This performance exhaust system is made of 100% durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow's limited lifetime warranty. Please check to ensure compliance with local noise regulations.
Product Overview
The MagnaFlow 2005-2009 Ford Mustang Competition Series Axle-Back Performance Exhaust System 16793 brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we're so well known for. This exhaust kit is designed to enhance your 4.6L, 5.4L 2005-2009 Ford Mustang with dyno-proven performance made possible thanks to fast-flowing mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 3.5in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips featuring a sporty finish. The exhaust system's axle-back layout replaces your ride's exhaust system from near the rear axle on back. Exhaust system 16793 is engineered to make your vehicle's engine produce Aggressive exterior and Moderate interior sound levels, befitting its competition-oriented design. 16793's direct-fit design makes installation a breeze thanks to the use of advanced 3D scanning techniques. This performance exhaust system is made of 100% durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow's limited lifetime warranty. Please check to ensure compliance with local noise regulations.
Features and Benefits
- Crafted From 409 Stainless Steel With All Mandrel-Bent Tubing
- Increased Horsepower And Torque
- Aggressive Exterior Sound
Product Details
| Anticipated Ship Out Time: | Approximately 1-2 Days |
|---|---|
| Attachment Style: | Clamp-On |
| Attachment Type: | Clamp-On |
| Catalytic Converter Quantity: | 0 |
| Clamp Type: | Band Clamp |
| Clamping Type: | Band Clamp |
| Clamps Included: | Yes |
| Color/Finish: | Stainless |
| Components: | Band Clamp=2 |
| Description: | Competition Series Stainless Axle-Back System |
| Exhaust Inlet Connection Type: | Clamp-On |
| Exhaust Pipe Material: | Stainless |
| Exhaust Tip Connection: | Welded-On |
| Exhaust Tip Cut: | Angle Cut |
| Exhaust Tip Diameter: | 3.5 |
| Exhaust Tip Edge: | Rolled Edge |
| Exhaust Tip Finish: | Polished |
| Exhaust Tip Intercooled: | No |
| Exhaust Tip Length: | 10 |
| Exhaust Tip Material: | Stainless Steel |
| Exhaust Tip Quantity: | 2 |
| Exhaust Tip Resonated: | No |
| Exhaust Tip Shape: | Round |
| Exhaust Tip Wall: | Double Wall |
| Exhaust Type: | Dual |
| Exit Location: | Dual Split Rear |
| Exit Position: | Dual Split Rear |
| Exit Quantity: | Dual |
| Exit Style: | Dual Split Rear |
| Finish: | Stainless |
| Gasket Included: | No |
| Gasket Or Seal Included: | No |
| Hangers Included: | Yes |
| Inlet Connection Type: | Clamp-On |
| Inlet Inside Diameter: | 2.500 in. |
| Inlet Type: | Clamp-On |
| Main Piping Diameter: | 2.500 in. |
| Material: | Stainless |
| Mounting Bracket Included: | No |
| Muffler Body Diameter: | 5.000 in. x 5.000 in. |
| Muffler Body Finish: | Polished |
| Muffler Body Height: | 5.000 in. |
| Muffler Body Length: | 11.000 in. |
| Muffler Body Material: | Stainless Steel |
| Muffler Body Shape: | Round |
| Muffler Body Width: | 5.000 in. |
| Muffler Count: | 2 |
| Muffler Finish: | Brushed |
| Muffler Material: | Stainless Steel |
| Muffler Quantity: | 2 |
| Muffler Type: | Straight-Through |
| Outlet Outside Diameter: | 3.500 in. |
| Part Number: | mag16793 |
| Pipe Material: | Stainless Steel |
| Prop 65 Y/N: | No |
| Recommended Use: | Performance |
| Series: | Competition |
| Sound Level: | Aggressive |
| Subtitle: | Axle-Back Performance Exhaust System |
| Subtitles: | Axle-Back |
| System Type: | Axle Back |
| Tail Pipe Diameter: | 2.500 in. |
| Tip Diameter: | 3.500 in. |
| Tip Finish: | Polished |
| Tip Length: | 10.000 in. |
| Tip Material: | Stainless Steel |
| Tip Quantity: | 2 |
| Tip Shape: | Round |
| Tip Type: | Rolled Edge |
| Title: | MagnaFlow 2005-2009 Ford Mustang Competition Series Axle-Back Performance Exhaust System |
| Tubing Diameter: | 2.500 in. |
| Type: | Axle-Back |
| Valve Included: | No |
| Valve Type: | None |
| WARNING CA Proposition 65: | No |
| Warranty: | Lifetime |
Part Type
Exhaust System Kit
Features
- Aggressive exterior sound
- Crafted From 409 Stainless Steel With All Mandrel-Bent Tubing
- Increased Horsepower And Torque
Specifications
- Product Attributes - Brand
- MagnaFlow
- Product Attributes - Manufacturer's Part Number
- 16793
- Product Attributes - Part Type
- Exhaust Systems
- Product Attributes - Product Line
- MagnaFlow Magnapack Exhaust Kits
- Product Attributes - UPC
- 841380032294
- Product Attributes - System Material
- 409 stainless steel
- Product Attributes - System Style
- Rear axle-back
- Product Attributes - Exhaust Type
- Dual
- Product Attributes - Exit Location
- Split rear
- Product Attributes - System Finish
- Natural
- Product Attributes - Catalytic Converter(s) Included
- No
- Product Attributes - Intermediate Pipe Diameter (in.)
- 2.50 in.
- Product Attributes - Muffler Included
- Yes
- Product Attributes - Muffler Quantity
- Two
- Product Attributes - Muffler Configuration
- Single inlet/Single outlet
- Product Attributes - Muffler Style
- Perforated tube with packing
- Product Attributes - Muffler Material
- 409 stainless steel
- Product Attributes - Muffler Finish
- Polished
- Product Attributes - Hardware Included
- Yes
- Product Attributes - Tailpipe Diameter (in.)
- 2.50 in.
- Product Attributes - Tip Included
- Yes
- Product Attributes - Tip Outlet Size (in.)
- 3.50
- Product Attributes - Tip Quantity
- 2
- Product Attributes - Tip Shape
- Round
- Product Attributes - Tip Cut
- Straight
- Product Attributes - Tip Edge Style
- Beveled edge, double-wall
- Product Attributes - Tip Material
- 304 stainless steel
- Product Attributes - Tip Color
- Polished
- Product Attributes - Remanufactured
- No
- Product Attributes - Quantity
- Sold as a kit.
- Product Attributes - Notes
- Depending on vehicle configuration, some modifications may be required. See installation instructions for details, if applicable.
- Product Attributes - Special Attention
- It is illegal to install parts or components that bypass, defeat, or render inoperative the manufacturers’ technology and design necessary to reduce vehicle emissions to meet state and federal Clean Air Act standards.
Reference Information
| Brand Name/s | Magnaflow |
|---|---|
| StreetFX SKU | mag16793 |
| SFX Item ID | 4284533 |
| Supplier Item Code | 4284533 |
| Manufacturer SKU | 16793 |
| Manufacturer UPC | 841380032294 |
| Alternative References | mpe-16793, MFL16793 |
Brochures
Compatibility
| Application Data |
|
|---|
Loading compatibility information...
Keep shopping
