MagnaFlow Sys C/B 00-03 Toyota Tundra 4.7L V8
MagnaFlow Sys C/B 00-03 Toyota Tundra 4.7L V8
A$2,370.08
Last Available from MFR.
LAST ONE AVAILABLE from the manufacturer's distribution centre. Once sold, this item may not be immediately available again. The dispatch timeframe shown is an estimate based on historical orders for this part and is dependent on the manufacturer releasing the final available unit.
We accept
Description
The MagnaFlow Toyota Tundra Street Series Cat-Back Performance Exhaust System brings out the personality of your 3.4L, 4.7L Toyota Tundra with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 1 Straight-Through mufflers ending in a Single Passenger Side Rear exit with 3.5in. Polished Welded-On Single Wall Angle Cut Edge tips, this Toyota Tundra exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Toyota Tundra's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15809 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15809 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
Product Overview
The MagnaFlow 2000-2006 Toyota Tundra Street Series Cat-Back Performance Exhaust System 15809 brings out the personality of your 3.4L, 4.7L 2000-2006 Toyota Tundra with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 1 Straight-Through mufflers ending in a Single Passenger Side Rear exit with 3.5in. Polished Welded-On Single Wall Angle Cut Cut Edge tips, this Toyota Tundra exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Toyota Tundra's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15809 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15809 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
Features and Benefits
- Durable Corrosion-Resistant Stainless Steel Construction
- CNC Precision Robotic Manufacturing Techniques
- Dyno-Proven Performance
Product Details
| Anticipated Ship Out Time: | Approximately 1-2 Days |
|---|---|
| Attachment Style: | Clamp-On |
| Attachment Type: | Clamp-On |
| Catalytic Converter Quantity: | 0 |
| Clamp Type: | Band Clamp |
| Clamping Type: | Band Clamp |
| Clamps Included: | Yes |
| Color/Finish: | Stainless |
| Components: | Band Clamp=2 |
| Description: | Street Series Stainless Cat-Back System |
| Exhaust Inlet Connection Type: | Clamp-On |
| Exhaust Pipe Material: | Stainless |
| Exhaust Tip Connection: | Welded-On |
| Exhaust Tip Cut: | Angle Cut |
| Exhaust Tip Diameter: | 3.5 |
| Exhaust Tip Edge: | Cut Edge |
| Exhaust Tip Finish: | Polished |
| Exhaust Tip Intercooled: | No |
| Exhaust Tip Length: | 12 |
| Exhaust Tip Material: | Stainless Steel |
| Exhaust Tip Quantity: | 1 |
| Exhaust Tip Resonated: | No |
| Exhaust Tip Shape: | Round |
| Exhaust Tip Wall: | Single Wall |
| Exhaust Type: | Single |
| Exit Location: | Single Passenger Side Rear |
| Exit Position: | Single Passenger Side Rear |
| Exit Quantity: | Single |
| Exit Style: | Single Passenger Side Rear |
| Finish: | Stainless |
| Gasket Included: | No |
| Gasket Or Seal Included: | No |
| Hangers Included: | Yes |
| Inlet Connection Type: | Clamp-On |
| Inlet Inside Diameter: | 3.000 in. |
| Inlet Type: | Clamp-On |
| Main Piping Diameter: | 2.500 in. |
| Material: | Stainless |
| Mounting Bracket Included: | No |
| Muffler Body Diameter: | 5.000 in. x 11.000 in. |
| Muffler Body Finish: | Polished |
| Muffler Body Height: | 5.000 in. |
| Muffler Body Length: | 22.000 in. |
| Muffler Body Material: | Stainless Steel |
| Muffler Body Shape: | Oval |
| Muffler Body Width: | 11.000 in. |
| Muffler Count: | 1 |
| Muffler Finish: | Brushed |
| Muffler Material: | Stainless Steel |
| Muffler Quantity: | 1 |
| Muffler Type: | Straight-Through |
| Outlet Outside Diameter: | 3.500 in. |
| Part Number: | mag15809 |
| Pipe Material: | Stainless Steel |
| Prop 65 Y/N: | No |
| Recommended Use: | Performance |
| Series: | Street |
| Sound Level: | Moderate |
| Subtitle: | Cat-Back Performance Exhaust System |
| Subtitles: | Cat-Back |
| System Type: | Cat Back |
| Tail Pipe Diameter: | 3.000 in. |
| Tip Diameter: | 3.500 in. |
| Tip Finish: | Polished |
| Tip Length: | 12.000 in. |
| Tip Material: | Stainless Steel |
| Tip Quantity: | 1 |
| Tip Shape: | Round |
| Tip Type: | Single Wall |
| Title: | MagnaFlow 2000-2006 Toyota Tundra Street Series Cat-Back Performance Exhaust System |
| Tubing Diameter: | 3.000 in. |
| Type: | Cat-Back |
| Valve Included: | No |
| Valve Type: | None |
| WARNING CA Proposition 65: | No |
| Warranty: | Lifetime |
Part Type
Exhaust System Kit
Features
- CNC Precision Robotic Manufacturing Techniques
- Durable Corrosion-Resistant Stainless Steel Construction
- Dyno-proven performance
Specifications
- Product Attributes - Brand
- MagnaFlow
- Product Attributes - Manufacturer's Part Number
- 15809
- Product Attributes - Part Type
- Exhaust Systems
- Product Attributes - Product Line
- MagnaFlow Street Series Performance Exhaust Systems
- Product Attributes - UPC
- 841380005830
- Product Attributes - System Material
- 409 stainless steel
- Product Attributes - System Style
- Cat-back
- Product Attributes - Exhaust Type
- Single
- Product Attributes - Exit Location
- Passenger side
- Product Attributes - System Finish
- Natural
- Product Attributes - Catalytic Converter(s) Included
- No
- Product Attributes - Intermediate Pipe Diameter (in.)
- 2.50 in.
- Product Attributes - Muffler Included
- Yes
- Product Attributes - Muffler Quantity
- One
- Product Attributes - Muffler Configuration
- Single inlet/Single outlet
- Product Attributes - Muffler Style
- Perforated tube with packing
- Product Attributes - Muffler Material
- 409 stainless steel
- Product Attributes - Muffler Finish
- Polished
- Product Attributes - Hardware Included
- Yes
- Product Attributes - Tailpipe Diameter (in.)
- 3.00 in.
- Product Attributes - Tip Included
- Yes
- Product Attributes - Tip Outlet Size (in.)
- 3.50
- Product Attributes - Tip Quantity
- 1
- Product Attributes - Tip Shape
- Round
- Product Attributes - Tip Cut
- Straight
- Product Attributes - Tip Edge Style
- Non-rolled edge, single-wall
- Product Attributes - Tip Material
- 304 stainless steel
- Product Attributes - Tip Color
- Polished
- Product Attributes - Remanufactured
- No
- Product Attributes - Quantity
- Sold as a kit.
- Product Attributes - Notes
- Depending on vehicle configuration, some modifications may be required. See installation instructions for details, if applicable. Kit includes polished muffler. Must re-use original fasteners and rubber insulators.
- Product Attributes - Special Attention
- It is illegal to install parts or components that bypass, defeat, or render inoperative the manufacturers’ technology and design necessary to reduce vehicle emissions to meet state and federal Clean Air Act standards.
Reference Information
| Brand Name/s | Magnaflow |
|---|---|
| StreetFX SKU | mag15809 |
| SFX Item ID | 4284619 |
| Supplier Item Code | 4284619 |
| Manufacturer SKU | 15809 |
| Manufacturer UPC | 841380005830 |
| Alternative References | MFL15809, MPE-15809, 4.7L |
Brochures
Compatibility
| Application Data |
|
|---|
Loading compatibility information...
Keep shopping
