Description

IMPORTANT NOTICE: Coilovers will not fit the Raptor trim.

ICON Vehicle Dynamics V.S. 2.5 Series remote reservoir rear coilover shocks with CDCV are an incredible upgrade for the rear end of the 2021-UP Ford Bronco. These adjustable coilovers allow up to 2-3” of rear lift height adjustability on 4-door Broncos without the Sasquatch package or 1.25-2.25” of rear lift over stock 4-door Sasquatch equipped Broncos, allowing the use of larger, more aggressive wheel and tire combinations. ICON’s Vehicle-specific shock length and valving along with the larger 2.5” shock body and increased piston area over stock components yield the maximum travel possible along with superior ride quality and suspension performance both on- and off-road. Reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. ICON's exclusive Compression Damping Control Valves are included for precisely dialing in your suspension performance. CDCV controls fluid flow under compression, allowing you to achieve the perfect tune whether driving on the street, slow-crawling through the rocks or mobbing across the desert at full throttle. These rear coilovers are mounted in a shaft up orientation and feature unique ICON engineered progressive triple rate coil springs, allowing for softer spring rate at ride height that ramps up as the coil compresses for improved bottom out resistance. This shaft up orientation also requires the reservoir hose to be routed along the rear lower links so ICON offers hose bracket options for the OE or ICON tubular links while ICON billet links incorporate this bracketry into their design. When paired with ICON 2.5 Series front coilovers vehicle control will be balanced front to rear, resulting in the best overall driving experience for your Ford Bronco.

Product Overview

ICON Vehicle Dynamics V.S. 2.5 Series remote reservoir rear coilover shocks with CDCV are an incredible upgrade for the rear end of the 2021-2023 Ford Bronco. These adjustable coilovers allow up to 2-3” of rear lift height adjustability on 4-door Broncos without the Sasquatch package or 1.25-2.25” of rear lift over stock 4-door Sasquatch equipped Broncos, allowing the use of larger, more aggressive wheel and tire combinations. ICON’s Vehicle-specific shock length and valving along with the larger 2.5” shock body and increased piston area over stock components yield the maximum travel possible along with superior ride quality and suspension performance both on- and off-road. Reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. ICON's exclusive Compression Damping Control Valves are included for precisely dialing in your suspension performance. CDCV controls fluid flow under compression, allowing you to achieve the perfect tune whether driving on the street, slow-crawling through the rocks or mobbing across the desert at full throttle. These rear coilovers are mounted in a shaft up orientation and feature unique ICON engineered progressive triple rate coil springs, allowing for softer spring rate at ride height that ramps up as the coil compresses for improved bottom out resistance. This shaft up orientation also requires the reservoir hose to be routed along the rear lower links so ICON offers hose bracket options for the OE or ICON tubular links while ICON billet links incorporate this bracketry into their design. When paired with ICON 2.5 Series front coilovers vehicle control will be balanced front to rear, resulting in the best overall driving experience for your Ford Bronco.

Features and Benefits

• Increased wheel travel (up to 14”) and ride quality over stock
• 100% Bolt-on - no drilling, cutting or welding necessary for installation
• Fully rebuildable and re-tunable
• Vehicle specific tuned for superior shock damping and control
• Remote reservoirs maintain cooler operating temperatures during extended off-road use
• ICON CDCV equipped for 10 settings of external compression damping adjustment
• Adjustable up to 2-3" of rear lift height on non-Sasquatch or 1.25-2.25” of rear lift on Sasquatch Broncos
• Unique ICON engineered triple rate coil springs
• 6061 Aircraft grade aluminum CNC machined components
• Corrosion resistant CAD plated shock bodies with 7/8" diameter shaft
• FK rod end bearings for extended longevity and minimal deflection

Product Details

110:	No
AAP_UDA_12:	EA
AAP_UDA_22:	1
AAP_UDA_4:	55
Active or Passive Suspension:	Passive
Add-On Part:	611074 - C/O BUMP STOP SPACER KIT 7/8" SHAFT 3/8" TALL
Adjustable Compression:	Yes
Adjustable Damping:	Yes
Adjustable Height:	Yes
Adjustable Rebound:	No
Body Diameter:	2.5
Boot Included:	No
California Prop 65 Warning:	Yes
California Proposition 65:	WARNING: This product contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.
Coil Over Springs Included:	Yes
Cylinder Color:	Silver
Cylinder Finish:	Cadmium Plated
Cylinder Material:	Steel
Damping Adjustment Type:	Manual
Damping Type:	Oil
Description:	21-UP BRONCO REAR 2.5 VS RR CDCV COILOVER KIT
Dust Shield Included:	No
Dust Shield:	No
Gas Charged:	Yes
Grade Type:	Performance
Internal Construction Type:	Single Tube
Lower Mount Type:	Eyelet
Material:	Steel
Maximum Lift:	3
Minimum Lift:	1.25
OEM Wheels & Tires Fitment:	Yes
Part Number:	ico48710C
Recommended Aftermarket Tires:	(Without Sasquatch Package): 35" x 12.50" (37" tires require coilover bump stop spacers)
Recommended Aftermarket Wheels:	(Without Sasquatch Package): ICON Alloys | 17x8.5" w/ 5.75" Backspace / 25mm Offset
Remote Reservoir:	Yes
Reservoir Style:	Remote
Self-Leveling:	No
Service Parts:	252011 - 2.5 PIGGYBACK/REMOTE RESI/BYPASS REBUILD KIT
Shaft Diameter:	0.875
Shock Absorber Body End Measuring Point:	Center of Eylet
Shock Absorber Rod End Measuring Point:	Top of Mounting Plate
Spring Color:	Black
Spring Material:	Steel
Spring Rate Type:	Progressive Triple Rate
Title:	21-UP BRONCO REAR 2.5 VS RR CDCV COILOVER KIT
Upper Mount Type:	Mounting Plate
Valving Type:	Digressive

Kit Options

This item is available as a full kit.
Select a kit option in the following table if you are looking for this item in a bundle form with all associated components.

Kit option/s:

Thumb	SKU	Kit Title
	icoK40006T	ICON 21-UP BRONCO NON-SASQUATCH 3-4" LIFT STAGE 6 SUSPENSION SYSTEM TUBULAR (1x ico44000T, 1x ico48400DJ, 1x ico48700C, 1x ico48710C, 1x ico611073)
	icoK40006	ICON 21-UP BRONCO NON-SASQUATCH 3-4" LIFT STAGE 6 SUSPENSION SYSTEM BILLET (1x ico44000, 1x ico48500DJ, 1x ico48700C, 1x ico48710C)
	icoK40007T	ICON 21-UP BRONCO NON-SASQUATCH 3-4" LIFT STAGE 7 SUSPENSION SYSTEM TUBULAR (1x ico44000T, 1x ico44200T, 1x ico48400DJ, 1x ico44100T, 1x ico48700C, 1x ico48710C, 1x ico611073)
	icoK40007	ICON 21-UP BRONCO NON-SASQUATCH 3-4" LIFT STAGE 7 SUSPENSION SYSTEM BILLET (1x ico44100, 1x ico44000, 1x ico48500DJ, 1x ico44200T, 1x ico48700C, 1x ico48710C)
	icoK40016T	ICON 21-UP BRONCO SASQUATCH 2-3" LIFT STAGE 6 SUSPENSION SYSTEM TUBULAR (1x ico44000T, 1x ico48400DJ, 1x ico48700C, 1x ico48710C, 1x ico611073)
	icoK40016	ICON 21-UP BRONCO SASQUATCH 2-3" LIFT STAGE 6 SUSPENSION SYSTEM BILLET (1x ico44000, 1x ico48500DJ, 1x ico48700C, 1x ico48710C)
	icoK40017T	ICON 21-UP BRONCO SASQUATCH 2-3" LIFT STAGE 7 SUSPENSION SYSTEM TUBULAR (1x ico44000T, 1x ico44200T, 1x ico48400DJ, 1x ico44100T, 1x ico48700C, 1x ico48710C, 1x ico611073)
	icoK40017	ICON 21-UP BRONCO SASQUATCH 2-3" LIFT STAGE 7 SUSPENSION SYSTEM BILLET (1x ico44100, 1x ico44000, 1x ico48500DJ, 1x ico44200T, 1x ico48700C, 1x ico48710C)

Data: v4.2 - Upd: 2026-10-13 20:37:22

Features

Specifications

Product Attributes - UPC

00840103412412

Product Attributes - Brand

ICON Vehicle Dynamics

Product Attributes - Notes

Coilovers will not fit the Raptor trim.

Product Attributes - Quantity

Sold as a kit.

Product Attributes - Part Type

Coilover Kits

Product Attributes - Gas Charged

Yes

Product Attributes - Lower Mount

Eyelet

Product Attributes - Upper Mount

Bracket

Product Attributes - Product Line

Icon Vehicle Dynamics 2.5 RR CDCV Coilover Kits

Product Attributes - Spring Finish

Black

Product Attributes - Internal Design

Monotube

Product Attributes - Shocks Included

Yes

Product Attributes - Welding Required

No

Product Attributes - Hardware Included

Yes

Product Attributes - Shock Body Finish

Zinc plated

Product Attributes - Adjustable Valving

Yes

Product Attributes - Body Diameter (in.)

2.500

Product Attributes - Shock Body Material

Aluminum

Product Attributes - Crossmember Included

No

Product Attributes - Coilover Kit Position

Rear

Product Attributes - Coilover Springs Included

Yes

Product Attributes - Manufacturer's Part Number

48710C

Product Attributes - Number of Valving Selections

10

Product Attributes - Suspension Height Adjustment

0.0-3.0 in. raised

Product Attributes - Adjustable Mounting Bracket Included

No

Compatibility