Icon
ICON Vehicle Dynamics Suspension Leveling & Lift Kits K53136 05-11 HILUX 0-3" STAGE 1 SUSPENSION SYSTEM
icoK53136
A$3,602.94
ICON 23-24 Ford F-250/F-350 Super Duty 4WD 4.5in Lift Front 2.5 Series Shocks - Pair
ICON 23-24 Ford F-250/F-350 Super Duty 4WD 4.5in Lift Front 2.5 Series Shocks - Pair
Sale ends in Calculating...
A$3,998.51 A$4,122.90
Limited Availability from MFR
Limited stock available from the manufacturer's distribution centre. The dispatch timeframe shown is an estimate based on historical orders of this part. This item is not held in our own warehouse, and availability and release timing may vary depending on manufacturer stock movements and processing at the time of ordering.
We accept
Description
ICON’s 2.5 Aluminum Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. With a truly vehicle-specific design, these shocks are configured specifically for each application in both length and damping tune. Featuring one-piece impact extruded aluminum cylinders, these 2.5 Aluminum Series shocks offer lighter weight, improved corrosion resistance, and a more uniform finish than traditional plated steel cylinders. Like all ICON shock absorbers, these 2.5 Aluminum Series shocks are 100% rebuildable and 100% revalveable. Remoyte reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. ICON’s unique use of a 6061 billet aluminum manifold a few inches below the top cap of the shock creates an internal “Bump Zone” that when used creates an additional 20% of damping force. This additional force helps prevent harsh bottom-out conditions and controls the suspension effectively when compressing at high velocity. The ICON CDE Valve upgrade is included for those desiring an easy way to tune the ride electronically from inside the vehicle. Compression Damping Electronic Valve (CDEV) is an electronically controlled valve that meters the flow of oil to regulate the amount of damping force that is created by the shock when compressed. This infinitely variable valve can react in less than 40ms and has the ability to make extremely precise adjustments for varying terrain. CDEV’s hydraulic circuits are also custom tailored per application to create the highest resolution and dynamic range allowable for each specific vehicle. Powered by ICON Intelligent Control and proprietary ICON mobile app, the system uses information from the onboard G-force sensor and Gyroscope to perform calculations based on algorithms and user-defined settings to predict terrain and adjust shock settings via the CDEV accordingly.
Product Overview
ICON’s 2.5 Aluminum Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. With a truly vehicle-specific design, these shocks are configured specifically for each application in both length and damping tune. Featuring one-piece impact extruded aluminum cylinders, these 2.5 Aluminum Series shocks offer lighter weight, improved corrosion resistance, and a more uniform finish than traditional plated steel cylinders. Like all ICON shock absorbers, these 2.5 Aluminum Series shocks are 100% rebuildable and 100% revalveable. Remoyte reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. ICON’s unique use of a 6061 billet aluminum manifold a few inches below the top cap of the shock creates an internal “Bump Zone” that when used creates an additional 20% of damping force. This additional force helps prevent harsh bottom-out conditions and controls the suspension effectively when compressing at high velocity. The ICON CDE Valve upgrade is included for those desiring an easy way to tune the ride electronically from inside the vehicle. Compression Damping Electronic Valve (CDEV) is an electronically controlled valve that meters the flow of oil to regulate the amount of damping force that is created by the shock when compressed. This infinitely variable valve can react in less than 40ms and has the ability to make extremely precise adjustments for varying terrain. CDEV’s hydraulic circuits are also custom tailored per application to create the highest resolution and dynamic range allowable for each specific vehicle. Powered by ICON Intelligent Control and proprietary ICON mobile app, the system uses information from the onboard G-force sensor and Gyroscope to perform calculations based on algorithms and user-defined settings to predict terrain and adjust shock settings via the CDEV accordingly.
Features and Benefits
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
- One-piece impact extruded aluminum cylinders offer excellent corrosion resistance and consistent finish
- Fully rebuildable and retunable
- Nitrogen charged monotube design with remote reservoir
- Remote reservoirs maintain cooler operating temperatures during extended off-road use and allow for longer suspension travel
- ICON's CDE Valve technology allows for in vehicle adjustment of compression damping settings and active adjustment via the ICON Intelligent Control (IIC)
- One-piece digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- 7/8” diameter induction hardened, chrome plated shock shaft
- Polyurethane bushings and forged steel mounting stems for OE factory type fitment
- PTFE lined spherical bearings and application specific mounting hardware
- 6061 aircraft grade aluminum CNC machined components
Product Details
| AAP_UDA_12: | EA |
|---|---|
| AAP_UDA_22: | 1 |
| AAP_UDA_4: | 55 |
| Active or Passive Suspension: | Active |
| Add-On Part: | 61721E - 17-24 FSD 4WD 4-5.5" 2.5 VS RR CDEV BOLT IN CO CONVERSION KIT |
| Adjustable Compression: | Yes |
| Adjustable Damping: | Yes |
| Adjustable Rebound: | No |
| Adjustable: | Yes |
| Boot Included: | NO |
| Bore Diameter: | 2.25 |
| California Prop 65 Warning: | Yes |
| California Proposition 65: | WARNING: This product contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. |
| Cylinder Color: | Gray |
| Cylinder Diameter: | 2.5 |
| Cylinder Material: | Aluminum |
| Damping Adjustment Type: | Electronic |
| Damping Type: | Oil |
| Description: | ICON 23-24 Ford F-250/F-350 Super Duty 4WD 4.5in Lift Front 2.5 Series Shocks - Pair |
| External Reservoir: | Yes |
| Gas Charged: | Yes |
| Grade Type: | Performance |
| Includes Bump Stop: | No |
| Lower Mount Type: | EYELET |
| Mounting Hardware Included: | Yes |
| Part Number: | ico67811EP |
| Reservoir Type: | Remote |
| Service Parts: | 252003 - SEAL INSTALL TOOL 2.5/3.0 |
| Shaft Diameter: | 0.875 |
| Shaft Material: | Chrome |
| Shock Absorber Body End Measuring Point: | Shoulder of Stem |
| Shock Absorber Rod End Measuring Point: | Center of Eylet |
| Title: | ICON 2023-2024 Ford F-250/F-350 Super Duty 4WD, 4.5†Lift, Front, V.S. 2.5 Aluminum Series Shocks, Remote Reservoir w/ CDEV, Pair |
| Tube Outside Diameter: | 2.5 |
| Upper Mount Type: | Stem |
| Valving Type: | Digressive |
Kit Options
This item is available as a full kit.
Select a kit option in the following table if you are looking for this item in a bundle form with all associated components.
Kit option/s:
| Thumb | SKU | Kit Title |
|---|---|---|
 |
icoK63179 | ICON Vehicle Dynamics - Coilover Kits for 2023 F-250 SUPER DUTY, F-350 DUTY K63179 COILOVER CONVERSION 23 FORD F250/F350 4-5.5" STAGE 9 SYSTEM |
|
icoK63179L | ICON Vehicle Dynamics - Coilover Kits for 2023 F-250 SUPER DUTY, F-350 DUTY K63179L COILOVER CONVERSION 23 FORD F250/F350 4-5.5" STAGE 9 SYSTEM W/ EXPANSION PACKS |
|
icoK63179R | ICON Vehicle Dynamics - Coilover Kits for 2023 F-250 SUPER DUTY, F-350 DUTY K63179R COILOVER CONVERSION 23 FORD F250/F350 4-5.5" STAGE 9 SYSTEM W/ RADIUS ARMS |
|
icoK63179RL | ICON Vehicle Dynamics - Coilover Kits for 2023 F-250 SUPER DUTY, F-350 DUTY K63179RL COILOVER CONVERSION 23 FORD F250/F350 4-5.5" STAGE 9 SYS RADIUS ARMS/EXPANSION PACKS |
|
icoK64538 | ICON Vehicle Dynamics - Suspension Leveling & Lift Kits for 2023 F-250 SUPER DUTY, F-350 DUTY K64538 SUSPENSION SYSTEM 23 FORD F250/F350 4.5" STAGE 8 GAS |
|
icoK64538L | ICON Vehicle Dynamics - Suspension Leveling & Lift Kits for 2023 F-250 SUPER DUTY, F-350 DUTY K64538L SUSPENSION SYSTEM 23 FORD F250/F350 4.5" STAGE 8 GAS W/ EXPANSION PACKS |
|
icoK64538R | ICON Vehicle Dynamics - Suspension Leveling & Lift Kits for 2023 F-250 SUPER DUTY, F-350 DUTY K64538R SUSPENSION SYSTEM 23 FORD F250/F350 4.5" STAGE 8 GAS W/ RADIUS ARMS |
|
icoK64538RL | ICON Vehicle Dynamics - Suspension Leveling & Lift Kits for 2023 F-250 SUPER DUTY, F-350 DUTY K64538RL SUSPENSION SYSTEM 23 FORD F250/F350 4.5" STAGE 8 GAS RADIUS ARMS/EXPANSION PACKS |
|
icoK64548 | ICON Vehicle Dynamics - Suspension Leveling & Lift Kits for 2023 F-250 SUPER DUTY, F-350 DUTY K64548 SUSPENSION SYSTEM 23 FORD F250/F350 4.5" STAGE 8 DIESEL |
|
icoK64548L | ICON Vehicle Dynamics - Suspension Leveling & Lift Kits for 2023 F-250 SUPER DUTY, F-350 DUTY K64548L SUSPENSION SYSTEM 23 FORD F250/F350 4.5" STAGE 8 DIESEL W/ EXPANSION PACKS |
|
icoK64548R | ICON Vehicle Dynamics - Suspension Leveling & Lift Kits for 2023 F-250 SUPER DUTY, F-350 DUTY K64548R SUSPENSION SYSTEM 23 FORD F250/F350 4.5" STAGE 8 DIESEL W/ RADIUS ARMS |
|
icoK64548RL | ICON Vehicle Dynamics - Suspension Leveling & Lift Kits for 2023 F-250 SUPER DUTY, F-350 DUTY K64548RL SUSPENSION SYSTEM 23 FORD F250/F350 4.5" STAGE 8 SUSPENSION SYS DIESEL RADIUS ARMS/EXPANSION PACKS |
Part Type
Suspension Shock Absorber Set
Features
- 6061 aircraft grade aluminum CNC machined components
- 7/8” diameter induction hardened, chrome plated shock shaft
- Fully rebuildable and retunable
- ICON's CDE Valve technology allows for in vehicle adjustment of compression damping settings and active adjustment via the ICON Intelligent Control (IIC)
- Nitrogen charged monotube design with remote reservoir
- One-piece digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- One-piece impact extruded aluminum cylinders offer excellent corrosion resistance and consistent finish
- Polyurethane bushings and forged steel mounting stems for OE factory type fitment
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
- PTFE lined spherical bearings and application specific mounting hardware
- Remote reservoirs maintain cooler operating temperatures during extended off-road use and allow for longer suspension travel
Specifications
- Product Attributes - Brand
- ICON Vehicle Dynamics
- Product Attributes - Manufacturer's Part Number
- 67811EP
- Product Attributes - Part Type
- Shocks and Struts
- Product Attributes - UPC
- 00840103427850
Reference Information
| Brand Name/s | Icon |
|---|---|
| StreetFX SKU | ico67811EP |
| SFX Item ID | 4141822 |
| Supplier Item Code | 4141822 |
| Manufacturer SKU | 67811EP |
| Manufacturer UPC | N/A |
| Alternative References | IVD67811EP, F-250/F-350, 4WD, 4.5in |
Brochures
Compatibility
| Application Data |
|
|---|
Loading compatibility information...
Keep shopping
More from Icon
Icon
ICON Rebound 17x8.5 5x150 25mm Offset 5.75in BS 110.1mm Bore Double Black Wheel
ico1817855557DB
A$686.24
Icon
ICON Rebound Pro 17x8.5 6x135 6mm Offset 5in BS 87.1mm Bore Bronze Wheel
ico21817856350BR
A$806.21
