Eibach ERS 11.00 in. Length x 5.00 in. OD Conventional Rear Spring
Eibach ERS 11.00 in. Length x 5.00 in. OD Conventional Rear Spring
A$240.84
LOW STOCK! Est Ship 4-7 days.
HURRY! LOW STOCK. This item is in limited stock at one of our distribution centres. The ETA is the approximate time required to prepare your order for dispatch.
We accept
Description
Eibach produces some of the finest conventional rear springs in the world. Other springs may frequently sag or need replaced. Top race teams from F1 to WRC, from Le Mans to NASCAR inevitably turn to Eibach. They produce springs with unparalleled precision and repeatability, using the world's finest Hi-Ten spring steel produced to exceedingly precise tolerances. Eibach uses state-of-the-art technology in every step of the manufacturing process.
Eibach conventional rear springs feature:
* Ultra-lightweight for reduced unsprung mass
* Maximum deflection in combination with smallest block heights
* Exceptional block resistance and durability
* Precision plan-parallel and square end configurations under unloaded and loaded conditions
* Lowest side loads with load center ideally located relative to spring axis
* Precision tolerances--the tightest in the industry
* Highest linearity and guaranteed rate consistency
* Each spring individually tested and rated
Product Overview
A properly tuned spring system provides the muscle needed to transform the power derived from the engine of a racing car to the track through optimum adhesion. Suspension tuning is a precise balance. On one hand, the spring system should be soft enough to compensate for road irregularities assuring permanent road contact, while on the on the other hand the spring system must be firm enough to reduce the body roll, squat, and dive of the vehicle during cornering, acceleration and braking.
For optimum balance, Eibach has developed our world famous ERS double spring system. By combining more than 700 different single spring components, the suspension engineer or weekend enthusiast can create nearly unlimited combinations. Our ERS double-spring system is unsurpassed in performance and flexibility.
The ERS systems relies on a Main and Tender spring concept that provides a softer initial rate when both springs are compressed together, then delivers the desired firmer ending rate once the tender spring closes completely. The Main spring has a linear-rate characteristic and determines the final rate of the system. The Tender springs are available in a variety of linear-rate as well as progressive-rate characteristics and determine the initial rate of the system.
A Helper spring is used to prevent the Main spring from becoming loose in the spring seat when the wheel is at full droop. The Helper spring, unlike the Tender spring, has very little spring rate, and therefore has no effect on the suspension characteristics of the vehicle. Up to 50mm of spring-to-perch gap can be covered with the use of a Helper spring.
Connecting Plates are used to connect Main and Tender springs. Eibach offers both inside and outside diameter connection plates depending upon the dimension and function of the specific damper utilized.
* Uncountable individual combination possibilities to create from standard spring components ex stock
* High spring travel (deflection) and therefore high end loads at short mounting lengths
* Block resistance
* Surface treated through shot-peening
* High dynamic durability (component longevity)
* Precise tolerances
* High quality corrosion protection by phosphating and epoxy coating
* Individual protective packaging
* Easy identification (imprinted with Part no.-indicates spring rate and physical dimensions)
Product Details
| (WSM) Category Display Order: | 492 |
|---|---|
| (WSM) Clean Prod Desc: | Conventional-Rear-Spring |
| (WSM) Web Category Description: | EIBACH CONVENTIONAL REAR SPRING |
| Block Height: | 4.69in |
| Description: | EIBACH CONVENTIONAL REAR SPRING |
| ID: | 5in |
| Length: | 11in |
| Load @ Block Height: | 4736lbs |
| Part Number: | eib1100.500.0750 |
| Rate: | 750lbs/in |
| Travel: | 6.31in |
Part Type
Spring 11in Rear 5in OD
Specifications
- Product Attributes - UPC
- 803050328427
- Product Attributes - Brand
- Eibach
- Product Attributes - Notes
- Block height: 4.690 in., load at block height: 4,736 lbs., and travel is 6.310 in.
- Product Attributes - Quantity
- Sold individually.
- Product Attributes - Part Type
- Racing Springs
- Product Attributes - Spring Type
- Coil
- Product Attributes - Product Line
- Eibach Conventional Rear Coil Springs
- Product Attributes - Spring Finish
- Red
- Product Attributes - For Street Use
- No
- Product Attributes - Bushings Included
- No
- Product Attributes - Spring Positioning
- Rear
- Product Attributes - Spring Rate (lbs/in.)
- 750 lbs./in.
- Product Attributes - Progressive Rate Spring
- No
- Product Attributes - Coil Spring Height (in.)
- 11.00 in.
- Product Attributes - Coil Spring Diameter (in.)
- 5.00 in.
- Product Attributes - Manufacturer's Part Number
- 1100.500.0750
Reference Information
| Brand Name/s | Eibach |
|---|---|
| StreetFX SKU | eib1100.500.0750 |
| SFX Item ID | 4420015 |
| Supplier Item Code | 4420015 |
| Manufacturer SKU | 1100.500.0750 |
| Manufacturer UPC | 803050328427 |
Compatibility
| Application Data |
|
|---|
Loading compatibility information...
Keep shopping
More from Eibach
Eibach
Eibach Pro-Truck Coilover Stage 2R 14-18 Chevrolet Silverado 1500 4WD
eibE86-23-032-02-22
A$2,946.12
Eibach
Eibach 21-23 Ford F-150 2WD Pro-Truck Lift Kit System Coilover 2.0 Stage 2R
eibE86-35-059-04-22
A$2,941.37
