Edelbrock
Edelbrock Carburetor Performer Series 4-Barrel 600 CFM Electric Choke Satin Finish
ede1406
A$1,054.71
Edelbrock Dual Quad Insulator Kit (2)
Edelbrock Dual Quad Insulator Kit (2)
A$90.99
Available from MFR.
This item is available from the manufacturer's distribution centre. The dispatch timeframe shown is an estimate based on historical order processing and release times for this part. This item is not held in our own warehouse, and actual dispatch timing may vary depending on manufacturer workload and logistics at the time of ordering.
We accept
Description
The Edelbrock Square-bore Dual Quad Heat Insulator Gaskets #9267 are designed to prevent percolation on Thunder Series and Edelbrock Performer Series Carburetors exposed to extreme under hood temperatures. These gaskets feature a four hole design which will allow dual quad Performer and RPM manifolds to seal properly to the carburetor. Prior to installation, check air cleaner-to-hood clearance to ensure that additional height of heat insulator gaskets will not cause interference. Remove air cleaner and all attachments to the carburetors such as fuel lines, throttle linkage, and vacuum lines. Be sure to note the position or tag each piece to facilitate re-installation. Remove the carburetors and set them, aside, then remove the old base gaskets and any additional plates. Remove the short carb studs and install the longer studs. Install the #9267 heat insulator gaskets directly against the manifold, then replace the carbs and all other connections.
Product Overview
The Edelbrock Square-bore Dual Quad Heat Insulator Gaskets #9267 are designed to prevent percolation on Thunder Series and Edelbrock Performer Series Carburetors exposed to extreme under hood temperatures. These gaskets feature a four hole design which will allow dual quad Performer and RPM manifolds to seal properly to the carburetor. Prior to installation, check air cleaner-to-hood clearance to ensure that additional height of heat insulator gaskets will not cause interference. Remove air cleaner and all attachments to the carburetors such as fuel lines, throttle linkage, and vacuum lines. Be sure to note the position or tag each piece to facilitate re-installation. Remove the carburetors and set them, aside, then remove the old base gaskets and any additional plates. Remove the short carb studs and install the longer studs. Install the #9267 heat insulator gaskets directly against the manifold, then replace the carbs and all other connections.
Features and Benefits
- Comes w/Extended Carb Studs
Product Details
| Barrel Quantity: | 4 |
|---|---|
| Description: | Carburetor Heat Insulator Gasket |
| Material: | Nitrile Rubber Composite |
| Part Number: | ede9267 |
| Quantity: | Set of 2 |
| RGL: | WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| Recommended Use: | Edelbrock Carburetors |
| Shape: | Square Bore |
| Thickness: | .125 |
| Type: | 4-Hole |
| WARNING CA Proposition 65 Message: | WARNING: This product can expose you to Chromium; which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information; visit www.P65warnings.ca.gov. |
| WARNING CA Proposition 65: | Yes |
Part Type
Carburetor Heat Insulator
Features
- Comes w/Extended Carb Studs
Specifications
- Product Attributes - Brand
- Edelbrock
- Product Attributes - Manufacturer's Part Number
- 9267
- Product Attributes - Part Type
- Carburetor Base Plate Gaskets
- Product Attributes - Product Line
- Edelbrock Heat Insulator Gaskets
- Product Attributes - UPC
- 085347092673
- Product Attributes - Number of Barrels
- 4
- Product Attributes - Carburetor Flange
- Square bore
- Product Attributes - Gasket Opening Style
- 4-hole
- Product Attributes - Gasket Thickness (in.)
- 0.125 in.
- Product Attributes - Gasket Material
- Nitrile
- Product Attributes - Quantity
- Sold as a kit.
- Product Attributes - Notes
- Kit is designed for Edelbrock dual-quad manifold use.
Reference Information
| Brand Name/s | Edelbrock |
|---|---|
| StreetFX SKU | ede9267 |
| SFX Item ID | 4236286 |
| Supplier Item Code | 4236286 |
| Manufacturer SKU | 9267 |
| Manufacturer UPC | 85347092673 |
| Alternative References | EDB9267, EDL-9267 |
Brochures
Compatibility
Loading compatibility information...
Keep shopping
More from Edelbrock
Edelbrock
Edelbrock Supercharger Stage 1 - Street Kit 2016 Mazda MX-5 Miata 2.0L w/ Tune
ede1554
A$14,207.84
Edelbrock
Edelbrock Crate Engine Supercharged Gen2 Coyote 5.0L w/8-Rib Belt Drive & Electronics (R2650-DP3C)
ede46890
A$64,128.94
On sale
Edelbrock
Edelbrock Power Package Top End Kit E-Street and Performer SBC
ede2022
A$5,158.44 A$5,543.43