Edelbrock
Edelbrock Carburetor Performer Series 4-Barrel 600 CFM Electric Choke Satin Finish
ede1406
A$1,054.71
Edelbrock Perf Plus Cam Only Chevy 4 3 Before 1992
Edelbrock Perf Plus Cam Only Chevy 4 3 Before 1992
Sale ends in Calculating...
A$1,124.99 A$1,258.96
Limited Availability from MFR
Limited stock available from the manufacturer's distribution centre. The dispatch timeframe shown is an estimate based on historical orders of this part. This item is not held in our own warehouse, and availability and release timing may vary depending on manufacturer stock movements and processing at the time of ordering.
We accept
Description
IMPORTANT NOTICE: This camshaft will not fit 1992 and later models equipped with balance shaft engines.
Edelbrock Rollin' Thunder Camshaft #3714 is designed for 4.3L 90 Degree V6 Chevy engines and produce optimum torque from the low-end to the mid-range. Rollin' Thunder camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. They are smooth idling cams for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. For use with OEM hydraulic roller lifters (use original lifters). Not for 1992-Later 4.3L balanced shaft engines. Requires aftermarket computer chip (not available from Edelbrock) for use with intake manifold #3713. Call Edelbrock Tech 800-416-8628 for info.Camshaft specifications:- Intake duration: 210 Degrees- Exhaust duration: 214 Degrees- Intake lift: .479"- Exhaust lift: .488"- Lobe separation: 112 Degree- Intake Center Line: 107- Vacuum: 17"
Product Overview
Edelbrock Rollin' Thunder Camshaft #3714 is designed for 4.3L 90 Degree V6 Chevy engines and produce optimum torque from the low-end to the mid-range. Rollin' Thunder camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. They are smooth idling cams for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. For use with OEM hydraulic roller lifters (use original lifters). Not for 1992-Later 4.3L balanced shaft engines. Requires aftermarket computer chip (not available from Edelbrock) for use with intake manifold #3713. Call Edelbrock Tech 800-416-8628 for info. Camshaft specifications: - Intake duration: 210 Degrees - Exhaust duration: 214 Degrees - Intake lift: .479" - Exhaust lift: .488" - Lobe separation: 112 Degree - Intake Center Line: 107 - Vacuum: 17"
Features and Benefits
- Take the Guesswork Out of Camshaft Selection!
Product Details
| Advertised Exhaust Duration: | 276 |
|---|---|
| Advertised Intake Duration: | 272 |
| Cam Type: | Roller |
| Computer Controlled Compatible: | No |
| Description: | Rollin Thunder Camshaft |
| Engine Make/Size: | Chevy 262 |
| Exh. Duration @ .050 in. (Deg): | 214 |
| Exh. Duration Advertised (Deg): | 276 |
| Exhaust Duration at .050 inch Lift: | 214 |
| Exhaust Valve Lift (in.): | 0.488 |
| Exhaust Valve Lift with Factory Rocker Arm Ratio: | 0.488 |
| Exhaust Valve Lift: | 0.325 |
| Int. Duration @ .050 in. (Deg): | 210 |
| Int. Duration Advertised (Deg): | 272 |
| Intake Duration @ 0.050 in.: | 210 Degree |
| Intake Duration Advertised: | 272 |
| Intake Duration at .050 Inch Lift: | 210 |
| Intake Valve Lift (in.): | 0.479 |
| Intake Valve Lift with Factory Rocker Arm Ratio: | 0.479 |
| Intake Valve Lift: | 0.319 |
| Lifter Type: | Roller |
| Lobe Separation: | 112 |
| Part Number: | ede3714 |
| RGL: | WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| RPM Range: | 1500-5500 |
| Usage: | OEM |
| WARNING CA Proposition 65 Message: | WARNING: This product can expose you to Chromium; which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information; visit www.P65warnings.ca.gov. |
| WARNING CA Proposition 65: | Yes |
Application Summary
Chevrolet:Small-Block 90 Deg V6:262 (4.3L)
Part Type
Engine Camshaft
Features
- Take the Guesswork Out of Camshaft Selection!
Specifications
- Product Attributes - Brand
- Edelbrock
- Product Attributes - Manufacturer's Part Number
- 3714
- Product Attributes - Part Type
- Camshafts
- Product Attributes - Product Line
- Edelbrock Rollin' Thunder Hydraulic Roller Camshafts
- Product Attributes - UPC
- 085347037148
- Product Attributes - Cam Style
- Hydraulic roller, OE roller
- Product Attributes - Camshaft Use
- Street
- Product Attributes - Basic Operating RPM Range
- Idle-5,500
- Product Attributes - Intake Duration at 050 inch Lift
- 210
- Product Attributes - Exhaust Duration at 050 inch Lift
- 214
- Product Attributes - Duration at 050 inch Lift
- 210 int./214 exh.
- Product Attributes - Advertised Intake Duration
- 272
- Product Attributes - Advertised Exhaust Duration
- 276
- Product Attributes - Advertised Duration
- 272 int./276 exh.
- Product Attributes - Intake Valve Lift with Factory Rocker Arm Ratio
- 0.479 in.
- Product Attributes - Exhaust Valve Lift with Factory Rocker Arm Ratio
- 0.488 in.
- Product Attributes - Valve Lift with Factory Rocker Arm Ratio
- 0.479 int./0.488 exh.
- Product Attributes - Lobe Separation (degrees)
- 112
- Product Attributes - Remanufactured
- No
- Product Attributes - Computer-Controlled Compatible
- No
- Product Attributes - Valve Springs Required
- Yes
- Product Attributes - Quantity
- Sold individually.
- Product Attributes - Notes
- This camshaft will not fit 1992 and later models equipped with balance shaft engines.
Reference Information
| Brand Name/s | Edelbrock |
|---|---|
| StreetFX SKU | ede3714 |
| SFX Item ID | 4236768 |
| Supplier Item Code | 4236768 |
| Manufacturer SKU | 3714 |
| Manufacturer UPC | 85347037148 |
| Alternative References | EDB3714, EDL-3714 |
Compatibility
Chevrolet:Small-Block 90 Deg V6:262 (4.3L)
Loading compatibility information...
Keep shopping
More from Edelbrock
Edelbrock
Edelbrock Supercharger Stage 1 - Street Kit 2016 Mazda MX-5 Miata 2.0L w/ Tune
ede1554
A$14,207.84
Edelbrock
Edelbrock Crate Engine Supercharged Gen2 Coyote 5.0L w/8-Rib Belt Drive & Electronics (R2650-DP3C)
ede46890
A$64,128.94
On sale
Edelbrock
Edelbrock Power Package Top End Kit E-Street and Performer SBC
ede2022
A$5,158.44 A$5,543.43