Edelbrock
Edelbrock Carburetor Performer Series 4-Barrel 600 CFM Electric Choke Satin Finish
ede1406
A$1,054.71
Edelbrock Intake Manifold Performer Eps w/ Oil Fill Tube And Breather for Small-Block Chevy
Edelbrock Intake Manifold Performer Eps w/ Oil Fill Tube And Breather for Small-Block Chevy
A$797.57
Available from MFR.
This item is available from the manufacturer's distribution centre. The dispatch timeframe shown is an estimate based on historical order processing and release times for this part. This item is not held in our own warehouse, and actual dispatch timing may vary depending on manufacturer workload and logistics at the time of ordering.
We accept
Description
IMPORTANT NOTICE: Will not fit under stock Corvette hood. Includes oil fill tube and matching breather. Not compatible with late model thermostat housings due to oil fill tube clearance. Please see the charts and guides tab for a comparison of square bore vs spread bore.
Edelbrock part #2703 Performer EPS intake manifold is designed for 1986 and earlier 262-400 cubic-inch Chevys. Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response. This intake manifold combines a modern runner design with a front mounted oil fill tube for those who want the vintage look of our Classic valve covers with no breathers. This small-block Chevy manifold has a runner design that's "tuned" for peak torque at 3500 rpm on a 350-inch engine and it's ideal for power from off-idle to 5500 rpm. Dyno tests showed gains of 5 hp and 9 ft-lbs. of torque over the Edelbrock Performer intake manifold #2101 on a 350 Chevy. From 3000 to 4500 rpm, the increases averaged 5+ ft-lbs. of torque for more performance where you need it most. In addition, the Edelbrock Performer EPS #2703 dual-plane intake manifold is optimized to deliver superior performance with Edelbrock square-bore Performer Series or Thunder Series AVS carburetors. Includes Oil Fill Tube (not installed) and matching push-in breather cap.
Product Overview
Edelbrock part #2703 Performer EPS intake manifold is designed for 1986 and earlier 262-400 cubic-inch Chevys. Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response. This intake manifold combines a modern runner design with a front mounted oil fill tube for those who want the vintage look of our Classic valve covers with no breathers. This small-block Chevy manifold has a runner design that's "tuned" for peak torque at 3500 rpm on a 350-inch engine and it's ideal for power from off-idle to 5500 rpm. Dyno tests showed gains of 5 hp and 9 ft-lbs. of torque over the Edelbrock Performer intake manifold #2101 on a 350 Chevy. From 3000 to 4500 rpm, the increases averaged 5+ ft-lbs. of torque for more performance where you need it most. In addition, the Edelbrock Performer EPS #2703 dual-plane intake manifold is optimized to deliver superior performance with Edelbrock square-bore Performer Series or Thunder Series AVS carburetors. Includes Oil Fill Tube (not installed) and matching push-in breather cap.
Features and Benefits
- Incl. Oil Fill Tube And Matching Push-In Breather
Product Details
| Basic Operating RPM Range: | Idle-5500 |
|---|---|
| CNC Ported: | No |
| Center Maximum Height: | 4.270 |
| Cylinder Head Type: | Standard |
| Description: | Performer EPS Intake Manifold |
| EGR Port: | No |
| Emission: | Without EGR |
| Engine Make/Size: | Chevy Small Block (262-400) |
| Finish: | Satin |
| Flange Type: | 4150 |
| Front Maximum Height: | 3.740 |
| Gasket Or Seal Included: | No |
| Grade Type: | Performance |
| Material: | Aluminum |
| Number of Carbs: | One |
| Part Number: | ede2703 |
| Position: | N/A |
| RGL: | WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| RPM Range: | Idle -5500 |
| Rear Maximum Height: | 4.800 |
| Series: | Performer |
| Single Or Dual Plane Type: | Dual |
| Usage: | Street/Hi-Performance |
| Vehicle Model: | Chevrolet |
| WARNING CA Proposition 65 Message: | WARNING: This product can expose you to Lead; which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information; visit www.P65warnings.ca.gov. |
| WARNING CA Proposition 65: | Yes |
Application Summary
Chevrolet:Small-Block Gen I:265 (4.3L)/267 (4.4L)/283 (4.6L)/302 (4.9L)/305 (5.0L)/307 (5.0L)/327 (5.4L)/350 (5.7L)/400 (6.6L)
Part Type
Engine Intake Manifold
Features
- Incl. Oil Fill Tube And Matching Push-In Breather
Specifications
- Product Attributes - Brand
- Edelbrock
- Product Attributes - Manufacturer's Part Number
- 2703
- Product Attributes - Part Type
- Intake Manifolds, Carbureted
- Product Attributes - Product Line
- Edelbrock Performer EPS Intake Manifolds
- Product Attributes - UPC
- 085347027033
- Product Attributes - Intake Section Included
- Complete
- Product Attributes - Engine Block Deck Height
- Standard deck
- Product Attributes - Carburetor Quantity
- One
- Product Attributes - Intake Style
- Dual plane
- Product Attributes - Basic Operating RPM Range
- Idle-5,500
- Product Attributes - Intake Manifold Height
- 4.270 in.
- Product Attributes - Intake Color
- Natural
- Product Attributes - Intake Material
- Aluminum
- Product Attributes - EGR
- No
- Product Attributes - Quantity
- Sold individually.
- Product Attributes - Notes
- Will not fit under stock Corvette hood. Includes oil fill tube and matching breather. Not compatible with late model thermostat housings due to oil fill tube clearance. Please see the charts and guides tab for a comparison of square bore vs spread bore.
Reference Information
| Brand Name/s | Edelbrock |
|---|---|
| StreetFX SKU | ede2703 |
| SFX Item ID | 4236543 |
| Supplier Item Code | 4236543 |
| Manufacturer SKU | 2703 |
| Manufacturer UPC | 85347027033 |
| Alternative References | EDB2703, EDL-2703 |
Brochures
Compatibility
Chevrolet:Small-Block Gen I:265 (4.3L)/267 (4.4L)/283 (4.6L)/302 (4.9L)/305 (5.0L)/307 (5.0L)/327 (5.4L)/350 (5.7L)/400 (6.6L)
Loading compatibility information...
Keep shopping
More from Edelbrock
Edelbrock
Edelbrock Supercharger Stage 1 - Street Kit 2016 Mazda MX-5 Miata 2.0L w/ Tune
ede1554
A$14,207.84
Edelbrock
Edelbrock Crate Engine Supercharged Gen2 Coyote 5.0L w/8-Rib Belt Drive & Electronics (R2650-DP3C)
ede46890
A$64,128.94
On sale
Edelbrock
Edelbrock Power Package Top End Kit E-Street and Performer SBC
ede2022
A$5,158.44 A$5,543.43