Edelbrock Camshaft Hydraulic Roller Pro Flo XT Chevy Gen IIi LS1 EFI Appl

SKU: EDE2219

Camshafts

EDE Rollin Thunder Camshaft...

Edelbrock

Edelbrock Camshaft Hydraulic Roller Pro Flo XT Chevy Gen IIi LS1 EFI Appl

SKU: EDE2219

Camshafts

EDE Rollin Thunder Camshaft...

Available from MFR. This item is available from the manufacturer's distribution centre. The dispatch timeframe shown is an estimate based on historical order processing and release times for this part. This item is not held in our own warehouse, and actual dispatch timing may vary depending on manufacturer workload and logistics at the time of ordering.

We accept

Description

Edelbrock Rollin' Thunder Camshaft #2219 is designed for LS1/LS6 Gen III Chevy's from 1997-04 and produces optimum torque from the low-end to the mid-range. Rollin' Thunder camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. They are smooth idling cams for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. This cam produced 536HP and 457 Ft Lbs of Torque when paired with E-CNC 215 #79949 cylinder heads. Must use a high stall torque converter only. Will not work with stock valve springs.Camshaft specifications:- Intake duration: 230 Degrees- Exhaust duration: 243 Degrees- Intake lift: .631"- Exhaust lift: .631"- Lobe separation: 114 Degree- Intake Center Line: 113 Degree- Vacuum: 14"

Product Overview

Edelbrock Rollin' Thunder Camshaft #2219 is designed for LS1/LS6 Gen III Chevy's from 1997-04 and produces optimum torque from the low-end to the mid-range. Rollin' Thunder camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. They are smooth idling cams for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. This cam produced 536HP and 457 Ft Lbs of Torque when paired with E-CNC 215 #79949 cylinder heads. Must use a high stall torque converter only. Will not work with stock valve springs. Camshaft specifications: - Intake duration: 230 Degrees - Exhaust duration: 243 Degrees - Intake lift: .631" - Exhaust lift: .631" - Lobe separation: 114 Degree - Intake Center Line: 113 Degree - Vacuum: 14"

Features and Benefits

Use with High Stall Torque Converter Only

Product Details

Advertised Exhaust Duration:	308
Advertised Intake Duration:	291
Cam Type:	Roller
Computer Controlled Compatible:	Yes
Description:	Rollin Thunder Camshaft
Engine Make/Size:	Chevy Small Block LS1
Exh. Duration @ .050 in. (Deg):	243
Exh. Duration Advertised (Deg):	244
Exhaust Duration at .050 inch Lift:	243
Exhaust Valve Lift (in.):	0.631
Exhaust Valve Lift with Factory Rocker Arm Ratio:	0.631
Exhaust Valve Lift:	0.371
Int. Duration @ .050 in. (Deg):	230
Int. Duration Advertised (Deg):	230
Intake Duration @ 0.050 in.:	230 Degree
Intake Duration Advertised:	230
Intake Duration at .050 Inch Lift:	230
Intake Valve Lift (in.):	0.631
Intake Valve Lift with Factory Rocker Arm Ratio:	0.631
Intake Valve Lift:	0.371
Lifter Type:	Roller
Lobe Separation:	114
Part Number:	ede2219
RGL:	WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
RPM Range:	OEM
Usage:	Street/Performance
WARNING CA Proposition 65 Message:	WARNING: This product can expose you to Chromium; which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information; visit www.P65warnings.ca.gov.
WARNING CA Proposition 65:	Yes

Application Summary

Chevrolet:Gen III LS1:346 (5.7L);Chevrolet:Gen III LS6:346 (5.7L)

Part Type

Engine Camshaft

Data: v4.2 - Upd: 2026-10-13 23:12:18

Features

Use with High Stall Torque Converter Only

Specifications

Product Attributes - Brand: Edelbrock
Product Attributes - Manufacturer's Part Number: 2219
Product Attributes - Part Type: Camshafts
Product Attributes - Product Line: Edelbrock Rollin' Thunder Hydraulic Roller Camshafts
Product Attributes - UPC: 085347022199
Product Attributes - Cam Style: Hydraulic roller, OE roller
Product Attributes - Camshaft Use: Street
Product Attributes - Basic Operating RPM Range: 1,500-6,500
Product Attributes - Intake Duration at 050 inch Lift: 230
Product Attributes - Exhaust Duration at 050 inch Lift: 243
Product Attributes - Duration at 050 inch Lift: 230 int./243 exh.
Product Attributes - Advertised Intake Duration: 291
Product Attributes - Advertised Exhaust Duration: 308
Product Attributes - Advertised Duration: 291 int./308 exh.
Product Attributes - Intake Valve Lift with Factory Rocker Arm Ratio: 0.631 in.
Product Attributes - Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.631 in.
Product Attributes - Valve Lift with Factory Rocker Arm Ratio: 0.631 int./0.631 exh.
Product Attributes - Lobe Separation (degrees): 114
Product Attributes - Remanufactured: No
Product Attributes - Computer-Controlled Compatible: Yes
Product Attributes - Valve Springs Required: Yes
Product Attributes - Quantity: Sold individually.
Product Attributes - Notes: Custom tuning and upgraded springs required. Use with high stall converter on auto models.

Reference Information

Brand Name/s	Edelbrock
StreetFX SKU	ede2219
SFX Item ID	4236903
Supplier Item Code	4236903
Manufacturer SKU	2219
Manufacturer UPC	85347022199
Alternative References	v8;, EDB2219, EDL-2219, LS1