Edelbrock Camshaft Perf Plus Hyd Roller SBC 1987 and Later Wide Center EFI

SKU: EDE2205

Camshafts

EDE Performer-Plus Camshaft...

Edelbrock

Edelbrock Camshaft Perf Plus Hyd Roller SBC 1987 and Later Wide Center EFI

SKU: EDE2205

Camshafts

EDE Performer-Plus Camshaft...

Last Available from MFR. LAST ONE AVAILABLE from the manufacturer's distribution centre. Once sold, this item may not be immediately available again. The dispatch timeframe shown is an estimate based on historical orders for this part and is dependent on the manufacturer releasing the final available unit.

We accept

Description

Edelbrock Rollin' Thunder Camshaft #2205 is designed for 283-400 V8 Chevy engines 1987-Later and produces optimum torque from the low-end to the mid-range. Rollin' Thunder camshafts should be matched with Performer manifolds for vehicles operating from off-idle to 5500 rpm. They are smooth idling cams for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. This cam produced 440HP and 425 Ft Lbs of Torque when paired with Pro-Flo XT EFI system #3528 and Performer E-Tec cylinder heads #60975. Use with high stall torque converter and stock ratio rocker arms only.Camshaft specifications:- Intake duration: 234 Degrees- Exhaust duration: 238 Degrees- Intake lift: .539"- Exhaust lift: .548"- Lobe separation: 114 Degree- Intake Center Line: 110 Degree- Vacuum: 13"

Product Overview

Edelbrock Rollin' Thunder Camshaft #2205 is designed for 283-400 V8 Chevy engines 1987-Later and produces optimum torque from the low-end to the mid-range. Rollin' Thunder camshafts should be matched with Performer manifolds for vehicles operating from off-idle to 5500 rpm. They are smooth idling cams for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. This cam produced 440HP and 425 Ft Lbs of Torque when paired with Pro-Flo XT EFI system #3528 and Performer E-Tec cylinder heads #60975. Use with high stall torque converter and stock ratio rocker arms only. Camshaft specifications: - Intake duration: 234 Degrees - Exhaust duration: 238 Degrees - Intake lift: .539" - Exhaust lift: .548" - Lobe separation: 114 Degree - Intake Center Line: 110 Degree - Vacuum: 13"

Features and Benefits

Increased Performance

Product Details

Advertised Exhaust Duration:	300
Advertised Intake Duration:	296
Cam Type:	Roller
Computer Controlled Compatible:	Yes
Description:	Rollin Thunder Camshaft
Engine Make/Size:	Chevy Small Block (262-400)
Exh. Duration @ .050 in. (Deg):	234
Exh. Duration Advertised (Deg):	238
Exhaust Duration at .050 inch Lift:	238
Exhaust Valve Lift (in.):	0.548
Exhaust Valve Lift with Factory Rocker Arm Ratio:	0.548
Exhaust Valve Lift:	0.365
Int. Duration @ .050 in. (Deg):	234
Int. Duration Advertised (Deg):	235
Intake Duration @ 0.050 in.:	234 Degree
Intake Duration Advertised:	235
Intake Duration at .050 Inch Lift:	365
Intake Valve Lift (in.):	0.539
Intake Valve Lift with Factory Rocker Arm Ratio:	0.539
Intake Valve Lift:	0.539
Lifter Type:	Roller
Lobe Separation:	114
Part Number:	ede2205
RGL:	WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
RPM Range:	OEM
Usage:	OEM
WARNING CA Proposition 65 Message:	WARNING: This product can expose you to Chromium; which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information; visit www.P65warnings.ca.gov.
WARNING CA Proposition 65:	Yes

Application Summary

Chevrolet:Small-Block Gen I:350 (5.7L)

Part Type

Engine Camshaft

Data: v4.2 - Upd: 2026-10-13 23:12:19

Features

Increased Performance

Specifications

Product Attributes - Brand: Edelbrock
Product Attributes - Manufacturer's Part Number: 2205
Product Attributes - Part Type: Camshafts
Product Attributes - Product Line: Edelbrock Rollin' Thunder Hydraulic Roller Camshafts
Product Attributes - UPC: 085347022052
Product Attributes - Cam Style: Hydraulic roller, OE roller
Product Attributes - Camshaft Use: Street
Product Attributes - Basic Operating RPM Range: 1,500-6,500
Product Attributes - Intake Duration at 050 inch Lift: 234
Product Attributes - Exhaust Duration at 050 inch Lift: 238
Product Attributes - Duration at 050 inch Lift: 234 int./238 exh.
Product Attributes - Advertised Intake Duration: 296
Product Attributes - Advertised Exhaust Duration: 300
Product Attributes - Advertised Duration: 296 int./300 exh.
Product Attributes - Intake Valve Lift with Factory Rocker Arm Ratio: 0.539 in.
Product Attributes - Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.548 in.
Product Attributes - Valve Lift with Factory Rocker Arm Ratio: 0.539 int./0.548 exh.
Product Attributes - Lobe Separation (degrees): 114
Product Attributes - Camshaft Gear Attachment: 3-bolt
Product Attributes - Remanufactured: No
Product Attributes - Computer-Controlled Compatible: Yes
Product Attributes - Valve Springs Required: Yes
Product Attributes - Quantity: Sold individually.
Product Attributes - Notes: This kit uses stock ratio rocker arms. Use with high-stall torque converter only. Requires aftermarket computer chip. Designed to work with factory engines originally equipped with hydraulic roller cam and lifters.

Reference Information

Brand Name/s	Edelbrock
StreetFX SKU	ede2205
SFX Item ID	4236751
Supplier Item Code	4236751
Manufacturer SKU	2205
Manufacturer UPC	85347022052
Alternative References	v8;, 1987-later;, EDB2205, EDL-2205