Edelbrock RPM Hydraulic Roller Cam Only 283-400 Chevy 57-86

SKU: EDE2201

Camshafts

EDE Performer RPM Camshaft...

Edelbrock

Edelbrock RPM Hydraulic Roller Cam Only 283-400 Chevy 57-86

SKU: EDE2201

Camshafts

EDE Performer RPM Camshaft...

Available from MFR. This item is available from the manufacturer's distribution centre. The dispatch timeframe shown is an estimate based on historical order processing and release times for this part. This item is not held in our own warehouse, and actual dispatch timing may vary depending on manufacturer workload and logistics at the time of ordering.

We accept

Description

Edelbrock Rollin' Thunder Camshaft #2201 is designed for 283-400 V8 Chevy engines from 1957-1986 and produces optimum torque from the low-end to the mid-range. Rollin' Thunder camshafts should be matched with Performer manifolds for vehicles operating from off-idle to 5500 rpm. They are smooth idling cams for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. This camshaft produced 435 HP and 435 Ft Lbs of Torque when paired with Performer RPM Air-Gap intake manifold #7516, Thunder Series AVS Carb #1813, and Performer RPM E-Tec cylinder heads #60975. Must be used with a thrust button, a high stall converter and stock ratio rocker arms only.Camshaft specifications:- Intake duration: 234 Degrees- Exhaust duration: 238 Degrees- Intake lift: .539"- Exhaust lift: .548"- Lobe separation: 112 Degree- Intake Center Line: 107 Degree- Vacuum: 12"

Product Overview

Edelbrock Rollin' Thunder Camshaft #2201 is designed for 283-400 V8 Chevy engines from 1957-1986 and produces optimum torque from the low-end to the mid-range. Rollin' Thunder camshafts should be matched with Performer manifolds for vehicles operating from off-idle to 5500 rpm. They are smooth idling cams for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. This camshaft produced 435 HP and 435 Ft Lbs of Torque when paired with Performer RPM Air-Gap intake manifold #7516, Thunder Series AVS Carb #1813, and Performer RPM E-Tec cylinder heads #60975. Must be used with a thrust button, a high stall converter and stock ratio rocker arms only. Camshaft specifications: - Intake duration: 234 Degrees - Exhaust duration: 238 Degrees - Intake lift: .539" - Exhaust lift: .548" - Lobe separation: 112 Degree - Intake Center Line: 107 Degree - Vacuum: 12"

Features and Benefits

Use Only Stock Ratio Rocker Arms

Product Details

Advertised Exhaust Duration:	300
Advertised Intake Duration:	296
Cam Type:	Roller
Computer Controlled Compatible:	No
Description:	Rollin Thunder Camshaft
Engine Make/Size:	Chevy Small Block (262-400)
Exh. Duration @ .050 in. (Deg):	238
Exh. Duration Advertised (Deg):	300
Exhaust Duration at .050 inch Lift:	238
Exhaust Valve Lift (in.):	0.548
Exhaust Valve Lift with Factory Rocker Arm Ratio:	0.548
Exhaust Valve Lift:	0.365
Int. Duration @ .050 in. (Deg):	234
Int. Duration Advertised (Deg):	296
Intake Duration @ 0.050 in.:	234 Degree
Intake Duration Advertised:	296
Intake Duration at .050 Inch Lift:	234
Intake Valve Lift (in.):	0.539
Intake Valve Lift with Factory Rocker Arm Ratio:	0.539
Intake Valve Lift:	0.539
Lifter Type:	Roller
Lobe Separation:	112
Part Number:	ede2201
RGL:	WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
RPM Range:	1500-6500
Usage:	OEM
WARNING CA Proposition 65 Message:	WARNING: This product can expose you to Chromium; which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information; visit www.P65warnings.ca.gov.
WARNING CA Proposition 65:	Yes

Application Summary

Chevrolet:Small-Block Gen I:283 (4.6L)/302 (4.9L)/305 (5.0L)/307 (5.0L)/327 (5.4L)/350 (5.7L)/400 (6.6L)

Part Type

Engine Camshaft

Data: v4.2 - Upd: 2026-10-13 23:12:30

Features

Use Only Stock Ratio Rocker Arms

Specifications

Product Attributes - Brand: Edelbrock
Product Attributes - Manufacturer's Part Number: 2201
Product Attributes - Part Type: Camshafts
Product Attributes - Product Line: Edelbrock Rollin' Thunder Hydraulic Roller Camshafts
Product Attributes - UPC: 085347022014
Product Attributes - Cam Style: Hydraulic roller, Retro-fit
Product Attributes - Camshaft Use: Street
Product Attributes - Basic Operating RPM Range: 1,500-6,500
Product Attributes - Intake Duration at 050 inch Lift: 234
Product Attributes - Exhaust Duration at 050 inch Lift: 238
Product Attributes - Duration at 050 inch Lift: 234 int./238 exh.
Product Attributes - Advertised Intake Duration: 296
Product Attributes - Advertised Exhaust Duration: 300
Product Attributes - Advertised Duration: 296 int./300 exh.
Product Attributes - Intake Valve Lift with Factory Rocker Arm Ratio: 0.539 in.
Product Attributes - Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.548 in.
Product Attributes - Valve Lift with Factory Rocker Arm Ratio: 0.539 int./0.548 exh.
Product Attributes - Lobe Separation (degrees): 112
Product Attributes - Remanufactured: No
Product Attributes - Computer-Controlled Compatible: No
Product Attributes - Valve Springs Required: Yes
Product Attributes - Quantity: Sold individually.
Product Attributes - Notes: This is a retro-fit camshaft designed for blocks that were not originally equipped with a hydraulic roller. Requires minimum of a 2,400-2,600 stall torque converter.

Reference Information

Brand Name/s	Edelbrock
StreetFX SKU	ede2201
SFX Item ID	4236670
Supplier Item Code	4236670
Manufacturer SKU	2201
Manufacturer UPC	85347022014
Alternative References	v8;, 1987-later;, non-lt1;, EDB2201, EDL-2201