Edelbrock
Edelbrock Carburetor Performer Series 4-Barrel 600 CFM Electric Choke Satin Finish
ede1406
A$1,054.71
Edelbrock Perf Plus Cam and Lifters Kit SBC 400
Edelbrock Perf Plus Cam and Lifters Kit SBC 400
A$832.77
Available from MFR.
This item is available from the manufacturer's distribution centre. The dispatch timeframe shown is an estimate based on historical order processing and release times for this part. This item is not held in our own warehouse, and actual dispatch timing may vary depending on manufacturer workload and logistics at the time of ordering.
We accept
Description
Edelbrock Performer-Plus Camshaft #2103 is designed for 400 Chevy V8 engines and produce optimum torque from the low-end to the mid-range. Performer-Plus camshafts should be matched with Performer manifolds for vehicles operating from off-idle to 5500 rpm. The Performer-Plus #2103 is a smooth idling cam for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. This cam produced 395 Ft Lbs of Torque when paired with Performer Intake manifold #2101 and stock cylinder heads. 50-State Legal E.O. #D-215-19 for 1957-86 small-block Chevrolet.Camshaft specifications:- Intake duration: 214 Degrees- Exhaust duration: 214 Degrees- Intake lift: .442"- Exhaust lift: .442"- Lobe separation: 112 Degree- Intake Center Line: 107 Degree- Vacuum: 15"
Product Overview
Edelbrock Performer-Plus Camshaft #2103 is designed for 400 Chevy V8 engines and produce optimum torque from the low-end to the mid-range. Performer-Plus camshafts should be matched with Performer manifolds for vehicles operating from off-idle to 5500 rpm. The Performer-Plus #2103 is a smooth idling cam for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. This cam produced 395 Ft Lbs of Torque when paired with Performer Intake manifold #2101 and stock cylinder heads. 50-State Legal E.O. #D-215-19 for 1957-86 small-block Chevrolet. Camshaft specifications: - Intake duration: 214 Degrees - Exhaust duration: 214 Degrees - Intake lift: .442" - Exhaust lift: .442" - Lobe separation: 112 Degree - Intake Center Line: 107 Degree - Vacuum: 15"
Features and Benefits
- Take the Guesswork Out of Camshaft Selection!
Product Details
| 9040: | D-215-19 |
|---|---|
| Advertised Exhaust Duration: | 288 |
| Advertised Intake Duration: | 288 |
| Cam Type: | Cast |
| Computer Controlled Compatible: | No |
| Description: | Performer-Plus Camshaft Kit |
| Engine Make/Size: | Chevy Small Block (262-400) |
| Exh. Duration @ .050 in. (Deg): | 214 |
| Exh. Duration Advertised (Deg): | 288 |
| Exhaust Duration at .050 inch Lift: | 214 |
| Exhaust Valve Lift (in.): | 0.442 |
| Exhaust Valve Lift: | 0.442 |
| Grade Type: | Performance |
| Int. Duration @ .050 in. (Deg): | 214 |
| Int. Duration Advertised (Deg): | 288 |
| Intake Duration .050 Inch Lift: | 214 |
| Intake Duration @ 0.050 in.: | 214 Degree |
| Intake Duration Advertised: | 288 |
| Intake Valve Lift (in.): | 0.442 |
| Intake Valve Lift: | 0.442 |
| Lifter Materials: | Hardened Steel |
| Lifter Type: | Hydraulic |
| Lobe Separation: | 112 |
| Part Number: | ede2103 |
| RGL: | WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| RPM Range: | 0-6750 |
| Usage: | Street/Performance |
| WARNING CA Proposition 65 Message: | WARNING: This product can expose you to Chromium; which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information; visit www.P65warnings.ca.gov. |
| WARNING CA Proposition 65: | Yes |
Application Summary
Chevrolet:Small-Block Gen I:262 (4.3L)/265 (4.3L)/267 (4.4L)/283 (4.6L)/302 (4.9L)/305 (5.0L)/307 (5.0L)/327 (5.4L)/350 (5.7L)/400 (6.6L)
Part Type
Engine Camshaft and Lifter Kit
Features
- Take the Guesswork Out of Camshaft Selection!
Specifications
- Product Attributes - Brand
- Edelbrock
- Product Attributes - Manufacturer's Part Number
- 2103
- Product Attributes - Part Type
- Camshaft Kits
- Product Attributes - Product Line
- Edelbrock Performer-Plus Cam and Lifter Kits
- Product Attributes - UPC
- 085347021031
- Product Attributes - Cam Style
- Hydraulic flat tappet
- Product Attributes - Basic Operating RPM Range
- Idle-5,500
- Product Attributes - Camshaft Use
- Street
- Product Attributes - Intake Duration at 050 inch Lift
- 214
- Product Attributes - Exhaust Duration at 050 inch Lift
- 214
- Product Attributes - Duration at 050 inch Lift
- 214 int./214 exh.
- Product Attributes - Advertised Intake Duration
- 288
- Product Attributes - Advertised Exhaust Duration
- 288
- Product Attributes - Advertised Duration
- 288 int./288 exh.
- Product Attributes - Intake Valve Lift with Factory Rocker Arm Ratio
- 0.442 in.
- Product Attributes - Exhaust Valve Lift with Factory Rocker Arm Ratio
- 0.442 in.
- Product Attributes - Valve Lift with Factory Rocker Arm Ratio
- 0.442 int./0.442 exh.
- Product Attributes - Lobe Separation (degrees)
- 112
- Product Attributes - Computer-Controlled Compatible
- No
- Product Attributes - Lifters Included
- Yes
- Product Attributes - Lifter Style
- Hydraulic flat tappet
- Product Attributes - Valve Springs Included
- No
- Product Attributes - Retainers Included
- No
- Product Attributes - Locks Included
- No
- Product Attributes - Valve Stem Seals Included
- No
- Product Attributes - Timing Chain and Gears Included
- No
- Product Attributes - Assembly Lubricant Included
- Yes
- Product Attributes - Pushrods Included
- No
- Product Attributes - Rocker Arms Included
- No
- Product Attributes - Gaskets Included
- No
- Product Attributes - Valve Springs Required
- Yes
- Product Attributes - Quantity
- Sold as a kit.
- Product Attributes - CARB EO Number(s)
- D-215-19
- Product Attributes - Emissions
- California EO Approved
Reference Information
| Brand Name/s | Edelbrock |
|---|---|
| StreetFX SKU | ede2103 |
| SFX Item ID | 4236770 |
| Supplier Item Code | 4236770 |
| Manufacturer SKU | 2103 |
| Manufacturer UPC | 85347021031 |
| Alternative References | EDB2103, EDL-2103 |
Brochures
Compatibility
Chevrolet:Small-Block Gen I:262 (4.3L)/265 (4.3L)/267 (4.4L)/283 (4.6L)/302 (4.9L)/305 (5.0L)/307 (5.0L)/327 (5.4L)/350 (5.7L)/400 (6.6L)
Loading compatibility information...
Keep shopping
More from Edelbrock
Edelbrock
Edelbrock Supercharger Stage 1 - Street Kit 2016 Mazda MX-5 Miata 2.0L w/ Tune
ede1554
A$14,207.84
Edelbrock
Edelbrock Crate Engine Supercharged Gen2 Coyote 5.0L w/8-Rib Belt Drive & Electronics (R2650-DP3C)
ede46890
A$64,128.94
On sale
Edelbrock
Edelbrock Power Package Top End Kit E-Street and Performer SBC
ede2022
A$5,158.44 A$5,543.43