Edelbrock
Edelbrock Carburetor Performer Series 4-Barrel 600 CFM Electric Choke Satin Finish
ede1406
A$1,054.71
Edelbrock VRS-4150 Carburetor 650 CFM 4-Circuit STD Booster - STD Finish
Edelbrock VRS-4150 Carburetor 650 CFM 4-Circuit STD Booster - STD Finish
A$1,995.53
Available from MFR.
This item is available from the manufacturer's distribution centre. The dispatch timeframe shown is an estimate based on historical order processing and release times for this part. This item is not held in our own warehouse, and actual dispatch timing may vary depending on manufacturer workload and logistics at the time of ordering.
We accept
Description
Edelbrock VRS-4150 Race & Performance Carburetor #1306 650 CFM is street friendly but race ready. The 3.75-tall cast aluminum main body fits all 4150 and 4500 carb flange manifolds without requiring an adapter plate. A street throttle arm, Moly-coated throttle shafts and built-in provisions for a standard GM three-wire TPS mount add features to this carburetor that are ideal for any user. Multiple vacuum hook-ups keep this carburetor usable on the street but still ready for the track with larger capacity fuel bowls and four circuit billet metering blocks with screw-in emulsion bleeds. All of these features make for easy tuning and great versatility in many applications. The 20% larger capacity fuel bowls feature internal ribs to control fuel slosh, and a sculpted baffle directs incoming fuel to the sides to minimize bubbles. The floats have corner cuts to avoid shutting off the fuel flow during hard cornering, and jet extender notches and jet extenders in the rear to keep the jets covered in fuel under hard acceleration. VRS carburetors allow users to externally adjust idle bypass air and the adjustment screws are accessible without removing the air cleaner/scoop. The advanced idle circuit features interchangeable idle discharge jets in all four corners to allow for a smooth, clean idle with the use of big, low-vacuum camshafts. Normally found only in high end racing carbs, the VRS includes fully adjustable intermediate fuel circuits, which help to provide incredible throttle response. Finally, for greater control at high RPM, the high speed/main fuel circuit is split into two bleed circuits – one each for the lower and upper sections. As an additional feature, the power valves are located on both primaries and secondaries to support optimized jetting. The power valve will add fuel as necessary while the power valve protection circuit prevents diaphragm damage from backfires.
Product Overview
Edelbrock VRS-4150 Race & Performance Carburetor #1306 650 CFM is street friendly but race ready. The 3.75-tall cast aluminum main body fits all 4150 and 4500 carb flange manifolds without requiring an adapter plate. A street throttle arm, Moly-coated throttle shafts and built-in provisions for a standard GM three-wire TPS mount add features to this carburetor that are ideal for any user. Multiple vacuum hook-ups keep this carburetor usable on the street but still ready for the track with larger capacity fuel bowls and four circuit billet metering blocks with screw-in emulsion bleeds. All of these features make for easy tuning and great versatility in many applications. The 20% larger capacity fuel bowls feature internal ribs to control fuel slosh, and a sculpted baffle directs incoming fuel to the sides to minimize bubbles. The floats have corner cuts to avoid shutting off the fuel flow during hard cornering, and jet extender notches and jet extenders in the rear to keep the jets covered in fuel under hard acceleration. VRS carburetors allow users to externally adjust idle bypass air and the adjustment screws are accessible without removing the air cleaner/scoop. The advanced idle circuit features interchangeable idle discharge jets in all four corners to allow for a smooth, clean idle with the use of big, low-vacuum camshafts. Normally found only in high end racing carbs, the VRS includes fully adjustable intermediate fuel circuits, which help to provide incredible throttle response. Finally, for greater control at high RPM, the high speed/main fuel circuit is split into two bleed circuits – one each for the lower and upper sections. As an additional feature, the power valves are located on both primaries and secondaries to support optimized jetting. The power valve will add fuel as necessary while the power valve protection circuit prevents diaphragm damage from backfires.
Product Details
| Accel Pump Well Size: | 30 |
|---|---|
| Barrel Quantity: | 4 Barrel |
| Body Height: | 3.75 |
| Booster Type: | Standard straight leg |
| Bore Diameter: | 1.6875 |
| Choke Type: | N/A |
| Condition: | New |
| Description: | Edelbrock VRS-4150 Carburetor 650 CFM 4-Circuit STD Booster - STD Finish |
| EGR Port: | N/A |
| Finish: | Bead Blast |
| Flange Shape: | 4150 and 4500 |
| Flow Rating: | 650 |
| Gasket Or Seal Included: | Yes |
| Intermediate Circuit: | Yes |
| Jet Extenders: | Yes- Secondary Side |
| Main Venturi Diameter: | 1.250 |
| Material: | Aluminum |
| Metering Block: | Billet- Four Circuit |
| Part Number: | ede1306 |
| Ported Timed Vacuum: | Yes |
| Primary Power Valve: | Yes |
| RGL: | WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| Secondaries: | Mechanical |
| Secondary Power Valve: | Yes |
| Series: | VRS-4150 |
| Standard Vacuum: | 2 - 3/8" dia. and 2- 3/16" dia |
Part Type
Carburetor
Specifications
- Product Attributes - Brand
- Edelbrock
- Product Attributes - Manufacturer's Part Number
- 1306
- Product Attributes - Part Type
- Carburetors
- Product Attributes - Product Line
- Edelbrock VRS-4150 Race and Performance Carburetors
- Product Attributes - UPC
- 085347013067
- Product Attributes - CFM
- 650
- Product Attributes - Fuel Category
- Gasoline
- Product Attributes - Remanufactured
- No
- Product Attributes - Number of Barrels
- 4
- Product Attributes - Carburetor Flange
- Square bore/Dominator
- Product Attributes - Choke
- None
- Product Attributes - Secondary Type
- Mechanical
- Product Attributes - Fuel Inlet
- Dual
- Product Attributes - Carburetor Color
- Satin
- Product Attributes - Ford Kickdown
- No
- Product Attributes - Booster Type
- Straight-leg
- Product Attributes - Throttle Linkage Type
- Universal
- Product Attributes - Carburetor Height (in.)
- 3.750 in.
- Product Attributes - Quantity
- Sold individually.
- Product Attributes - Notes
- Carburetor includes 4-circuit billet metering blocks, externally adjustable floats with 4-corner idle. The -6AN fuel inlets can be moved to either right or left side.
Reference Information
| Brand Name/s | Edelbrock |
|---|---|
| StreetFX SKU | ede1306 |
| SFX Item ID | 4237643 |
| Supplier Item Code | 4237643 |
| Manufacturer SKU | 1306 |
| Manufacturer UPC | 85347013067 |
| Alternative References | vrs-4150, EDB1306, EDL-1306, 4-Circuit |
Compatibility
| Application Data |
|
|---|
Loading compatibility information...
Keep shopping
More from Edelbrock
Edelbrock
Edelbrock Supercharger Stage 1 - Street Kit 2016 Mazda MX-5 Miata 2.0L w/ Tune
ede1554
A$14,207.84
Edelbrock
Edelbrock Crate Engine Supercharged Gen2 Coyote 5.0L w/8-Rib Belt Drive & Electronics (R2650-DP3C)
ede46890
A$64,128.94
On sale
Edelbrock
Edelbrock Power Package Top End Kit E-Street and Performer SBC
ede2022
A$5,158.44
A$5,543.43