Eagle Standard Forged 4340 Chromoly Steel
Eagle Standard Forged 4340 Chromoly Steel
A$2,553.24
Available from MFR.
This item is available from the manufacturer's distribution centre. The dispatch timeframe shown is an estimate based on historical order processing and release times for this part. This item is not held in our own warehouse, and actual dispatch timing may vary depending on manufacturer workload and logistics at the time of ordering.
We accept
Description
Eagle forged 4340 steel center-counterweighted Cranks feature a non-twist forging, center counterweights for added stability at high RPM and high-power applications. 125" fillet radiuses for superior strength so chamfered / narrowed bearings required, nitrided surface and micropolished. Intended for the most demanding applications.
Product Overview
Eagle Crankshafts feature exceptional strength and quality at a reasonable price. Eagle cranks are forged in a non-twist forging and undergo a multi-stage heat treatment process as well as stress relieving, shot peening, and nitriding. They are magnafluxed and sonic tested to insure quality. Every journal is micropolished to a 3 or better R.A. On all journals, a 0.125†radius is used to increase strength, so chamfered bearings must be used. The perfect choice for engines up to 1500HP!
*4340 Steel Crankshafts*
Eagle forged 4340 steel crankshafts are forged from SAE 4340 steel, feature a non-twist forging, multi-stage heat treat process, stress relieving, shot-peening, and nitriding for superior strength and reliability in the most demanding applications. Each journal is micropolished to a 3 r.a. or better. A .125†radius is used to increase strength, so chamfered bearings must be used. All use a Ford rod journal width regardless of journal diameter. All are designed for internal balance. These are the perfect choice for applications up to 1500 hp.
Eagle Forged 4340 Steel Crankshafts are also available in 'Lightweight' versions - Counterweights are knife-edged for reduced weight and less windage. Typical weight reduction is 5-6 lbs.
*Cast Steel Crankshafts*
Eagle cast steel crankshafts offer an excellent alternative to a factory cast crank. All radii are .092†so O.E. style bearings can be used. Target bobweight is +/- 2% GUARANTEED! Recommended for use up to 500hp. Designed for 28 in-oz. external balance.
Product Details
| Balance Type: | Internal |
|---|---|
| Bobweight: | 1600 |
| Crankshaft Stroke: | 3.554 in |
| Description: | Forged Steel Crankshaft |
| Engine Stroke: | 3.554 |
| Flywheel Bolt Count: | 8 |
| Flywheel Register Diameter: | call |
| Intended Balance: | internal |
| Main Journal Diameter: | 2.657 |
| Main Journal: | 2.657 in |
| Material: | Forged 4340 steel |
| Minimum Rod Length: | 5.933 in |
| Part Number: | eag428135545933 |
| Pilot Bore Diameter: | call |
| Prop 65 (C, R or CR): | C |
| Prop 65 - Long Label: | This product contains nickel, which is known to the State of California to cause cancer |
| Prop 65 - Short Label: | prop65_warning.jpg |
| Prop 65 Long: | This product contains nickel, which is known to the State of California to cause cancer. |
| Prop 65 Warning Chemical Listing: | Nickel |
| Prop 65 Yes/No: | Yes |
| Rear Seal Diameter: | call |
| Rod Journal Width: | 1.900 in |
| Rod Journal: | 2.086 in |
| Snout Diameter: | call |
| Stroke: | 3.554" |
| Target Bobweight: | 1600g |
| Title: | ESP 4340 CRANK 4.6L 281 8 BOLT FLANGE 3.554 in |
Application Summary
Ford 4.6L MODULAR V8
Part Type
Engine Crankshaft
Specifications
- Product Attributes - Brand
- Eagle Specialty Products
- Product Attributes - Manufacturer's Part Number
- 428135545933
- Product Attributes - Part Type
- Crankshafts
- Product Attributes - Product Line
- Eagle Forged 4340 Steel Crankshafts
- Product Attributes - UPC
- 793348006949
- Product Attributes - Engine Stroke (in.)
- 3.554 in.
- Product Attributes - Crankshaft Material
- Forged 4340 steel
- Product Attributes - Engine Balance
- Internal
- Product Attributes - Rear Main Seal Style
- 1-piece
- Product Attributes - Lightened
- No
- Product Attributes - Requires Narrow Bearings
- Yes
- Product Attributes - Rod Bearings Included
- No
- Product Attributes - Main Bearings Included
- No
- Product Attributes - Rod Journal Diameter (in.)
- 2.086
- Product Attributes - Main Journal Diameter (in.)
- 2.657 in.
- Product Attributes - Balancer Bolt Thread Size
- M12 x 1.5
- Product Attributes - Crankshaft Snout Style
- Standard
- Product Attributes - Weight
- 50.000 lbs.
- Product Attributes - Quantity
- Sold individually.
- Product Attributes - Notes
- This crankshaft features center counterweights for added strength at high RPM, which may require block clearancing.
Reference Information
| Brand Name/s | Eagle |
|---|---|
| StreetFX SKU | eag428135545933 |
| SFX Item ID | 4052951 |
| Supplier Item Code | 4052951 |
| Manufacturer SKU | 428135545933 |
| Manufacturer UPC | 793348006949 |
| Alternative References | ESP-428135545933 |
Compatibility
Ford 4.6L MODULAR V8
Loading compatibility information...
Keep shopping
More from Eagle
On sale
Eagle
Eagle Chevy 350 Street & Strip Rotating Assembly 3.750in. Stroke 4.030in. Bore
eagB15405E030
A$3,391.65 A$3,394.16
Eagle
Eagle Chevrolet SBC 1pc Seal 383ci Balanced Rotating Assembly Kit w/168 Tooth Flexplate
eagB15504L03068
A$3,156.32
Eagle
Eagle Chevrolet Small Block I-Beam Street/Strip Rotating Assembly Kit
eagB13005E040
A$3,553.12
