COMP Cams Dual Energy Cam and Lifter Kits CL12-208-3 Camshaft Kits, Kits, Hydraulic Flat Tappet, Advertised Duration 265/269, Lift 0.442/0.465, Chevy, GMC, Small Block, Kit
COMP Cams Dual Energy Cam and Lifter Kits CL12-208-3 Camshaft Kits, Kits, Hydraulic Flat Tappet, Advertised Duration 265/269, Lift 0.442/0.465, Chevy, GMC, Small Block, Kit
A$843.41
Last Available from MFR.
LAST ONE AVAILABLE from the manufacturer's distribution centre. Once sold, this item may not be immediately available again. The dispatch timeframe shown is an estimate based on historical orders for this part and is dependent on the manufacturer releasing the final available unit.
We accept
Description
Ground with more exhaust duration and lift than the intake, the Dual Energy camshaft grind is designed for applications where a slight sacrifice in low end power is acceptable in exchange for increased mid and upper RPM power. Ideal for use in stock applications with restrictive exhaust systems, the Dual Energy's addition exhaust duration overcomes stock exhaust limitations.
Application Summary
Fits Chevrolet GEN 1 Small Blocks including the 262, 265, 267, 283, 302, 305, 307, 327, 350 and 400. Does not fit LT1/LT4, or factory roller Small Blocks built from 1985 and newer. GM gradually added roller camshafts to 305's and 350's from the mid 80's forward. Camaros/Firebirds/Corvettes received the roller cams early, but many trucks and SUV's had flat tappet cams until the mid 90's. Remove the intake or timing cover to confirm whether the block is a factory roller or flat tappet. Does not fit the LS1, LS2, LS3 or any LS-based 4.8, 5.3, 5.7, 6.0 and 6.2. 1955-1957 Chevrolet 265 engines require a groove on the 5th cam journal for oiling. Contact us for more information.
Part Type
Engine Camshaft and Lifter Kit
Specifications
- Product Attributes - Brand
- COMP Cams
- Product Attributes - Manufacturer's Part Number
- CL12-208-3
- Product Attributes - Part Type
- Camshaft Kits
- Product Attributes - Product Line
- COMP Cams Dual Energy Cam and Lifter Kits
- Product Attributes - UPC
- 00036584380788
- Product Attributes - Cam Style
- Hydraulic flat tappet
- Product Attributes - Basic Operating RPM Range
- 1,500-5,750
- Product Attributes - Camshaft Use
- Street/Strip
- Product Attributes - Intake Duration at 050 inch Lift
- 211
- Product Attributes - Exhaust Duration at 050 inch Lift
- 221
- Product Attributes - Duration at 050 inch Lift
- 211 int./221 exh.
- Product Attributes - Advertised Intake Duration
- 265
- Product Attributes - Advertised Exhaust Duration
- 269
- Product Attributes - Advertised Duration
- 265 int./269 exh.
- Product Attributes - Intake Valve Lift with Factory Rocker Arm Ratio
- 0.442 in.
- Product Attributes - Exhaust Valve Lift with Factory Rocker Arm Ratio
- 0.465 in.
- Product Attributes - Valve Lift with Factory Rocker Arm Ratio
- 0.442 int./0.465 exh.
- Product Attributes - Lobe Separation (degrees)
- 110
- Product Attributes - Camshaft Gear Attachment
- 3-bolt
- Product Attributes - Grind Number
- 265DEH
- Product Attributes - Computer-Controlled Compatible
- No
- Product Attributes - Lifters Included
- Yes
- Product Attributes - Lifter Style
- Hydraulic flat tappet
- Product Attributes - Valve Springs Included
- No
- Product Attributes - Retainers Included
- No
- Product Attributes - Locks Included
- No
- Product Attributes - Valve Stem Seals Included
- No
- Product Attributes - Timing Chain and Gears Included
- No
- Product Attributes - Assembly Lubricant Included
- Yes
- Product Attributes - Pushrods Included
- No
- Product Attributes - Rocker Arms Included
- No
- Product Attributes - Gaskets Included
- No
- Product Attributes - Valve Springs Required
- Yes
- Product Attributes - Quantity
- Sold as a kit.
Reference Information
| Brand Name/s | Comp Cams |
|---|---|
| StreetFX SKU | ccaCL12-208-3 |
| SFX Item ID | 4776697 |
| Supplier Item Code | 4776697 |
| Manufacturer SKU | CL12-208-3 |
| Manufacturer UPC | 36584380788 |
| Alternative References | COMCL12-208-3 |
Brochures
Compatibility
Fits Chevrolet GEN 1 Small Blocks including the 262, 265, 267, 283, 302, 305, 307, 327, 350 and 400. Does not fit LT1/LT4, or factory roller Small Blocks built from 1985 and newer. GM gradually added roller camshafts to 305's and 350's from the mid 80's forward. Camaros/Firebirds/Corvettes received the roller cams early, but many trucks and SUV's had flat tappet cams until the mid 90's. Remove the intake or timing cover to confirm whether the block is a factory roller or flat tappet. Does not fit the LS1, LS2, LS3 or any LS-based 4.8, 5.3, 5.7, 6.0 and 6.2. 1955-1957 Chevrolet 265 engines require a groove on the 5th cam journal for oiling. Contact us for more information.
Loading compatibility information...
Keep shopping
More from Comp Cams
