COMP Cams Camshaft CS 294Rx-6
COMP Cams Camshaft CS 294Rx-6
A$1,149.83
Last Available from MFR.
LAST ONE AVAILABLE from the manufacturer's distribution centre. Once sold, this item may not be immediately available again. The dispatch timeframe shown is an estimate based on historical orders for this part and is dependent on the manufacturer releasing the final available unit.
We accept
Description
SBC - 1955-57 models have an oiling groove in the rear journal. The listed part numbered cams will not fit these models, so if you require a Camshaft with the oiling groove, please call us at 1-800-999-0853 or contact us, and we will assist you with placing an order.
Product Overview
Fits Chevrolet GEN 1 Small Blocks including the 262, 265, 267, 283, 302, 305, 307, 327, 350 and 400. Does not fit LT1/LT4, or factory roller Small Blocks built from 1985 and newer. GM gradually added roller camshafts to 305's and 350's from the mid 80's forward. Camaros/Firebirds/Corvettes received the roller cams early, but many trucks and SUV's had flat tappet cams until the mid 90's. Remove the intake or timing cover to confirm whether the block is a factory roller or flat tappet. Does not fit the LS1, LS2, LS3 or any LS-based 4.8, 5.3, 5.7, 6.0 and 6.2. 1955-1957 Chevrolet 265 engines require a groove on the 5th cam journal for oiling. Contact us for more information.
Product Details
| Advertised Exhaust Duration: | 301 |
|---|---|
| Advertised Intake Duration: | 294 |
| Amazon ASIN: | B001G7IZ4O |
| Assembly Lubricant Included: | No |
| Basic Operating RPM Range: | 5500-8,500 |
| C.A.R.B. E.O. Number: | N/A |
| C.A.R.B. Exempt for California Certified Vehicles Manufactured Before 1965?: | Yes, but must meet tailpipe emission standards for year of vehicle. |
| C.A.R.B. Exempt for Federally Certified Vehicles Manufactured Before 1967?: | Yes, but must meet tailpipe emission standards for year of vehicle. |
| C.A.R.B. Exempt for Foreign Vehicles Manufactured Before 1967?: | Yes, but must meet tailpipe emission standards for year of vehicle. |
| C.A.R.B. Exempt for On-Road Vehicles?: | No |
| C.A.R.B. Exempt for Racing and Off-Road Only Vehicles?: | Yes, but must be a race/competition only vehicle. |
| C.A.R.B. Exemption Reason: | N/A |
| California Proposition 65: | WARNING: Cancer and Reproductive Harm P65Warnings.ca.gov |
| Cam Type: | Solid Roller |
| Camshaft Gear Attachment: | 3-Bolt |
| Camshaft Material: | Billet Steel |
| Camshaft Series: | Oval Track Xtreme RX (50mm Journal) |
| Description: | Oval Track 261/268 Solid Roller Cam for Chevrolet Small Block |
| Engine Family: | Chevrolet 262-400 c.i. 8 Cylinder (1958-1998) |
| Exhaust Duration @ .050 in.: | 268 |
| Exhaust Duration at .050 inch Lift: | 268 |
| Exhaust Duration: | 301 |
| Exhaust Valve Lift(in): | 0.648 |
| Exhaust Valve Lift: | 0.648 |
| Grind Number: | 294RX-6 |
| Intake Duration @ .050 in.: | 261 |
| Intake Duration at .050 Inch Lift: | 261 |
| Intake Duration: | 294 |
| Intake Valve Lift(in): | 0.648 |
| Intake Valve Lift: | 0.648 |
| Lifter Type: | Solid Roller |
| Lifters Included: | No |
| Lobe Separation: | 106 |
| Part Number: | cca12-850-9 |
| RPM Range: | 5000-13000 |
| Title: | Oval Track 261/268 Solid Roller Cam for Chevrolet Small Block |
| Usage: | Strip |
| Valve Springs Required: | Yes |
Application Summary
Fits Chevrolet GEN 1 Small Blocks including the 262, 265, 267, 283, 302, 305, 307, 327, 350 and 400. Does not fit LT1/LT4, or factory roller Small Blocks built from 1985 and newer. GM gradually added roller camshafts to 305's and 350's from the mid 80's forward. Camaros/Firebirds/Corvettes received the roller cams early, but many trucks and SUV's had flat tappet cams until the mid 90's. Remove the intake or timing cover to confirm whether the block is a factory roller or flat tappet. Does not fit the LS1, LS2, LS3 or any LS-based 4.8, 5.3, 5.7, 6.0 and 6.2. 1955-1957 Chevrolet 265 engines require a groove on the 5th cam journal for oiling. Contact us for more information.
Part Type
Engine Camshaft
Specifications
- Product Attributes - Brand
- COMP Cams
- Product Attributes - Manufacturer's Part Number
- 12-850-9
- Product Attributes - Part Type
- Camshafts
- Product Attributes - Product Line
- COMP Cams Oval Track Camshafts
- Product Attributes - UPC
- 036584015727
- Product Attributes - Cam Style
- Solid roller, Retro-fit
- Product Attributes - Camshaft Use
- Drag race
- Product Attributes - Basic Operating RPM Range
- 5,500-8,500
- Product Attributes - Intake Duration at 050 inch Lift
- 261
- Product Attributes - Exhaust Duration at 050 inch Lift
- 268
- Product Attributes - Duration at 050 inch Lift
- 261 int./268 exh.
- Product Attributes - Advertised Intake Duration
- 294
- Product Attributes - Advertised Exhaust Duration
- 301
- Product Attributes - Advertised Duration
- 294 int./301 exh.
- Product Attributes - Intake Valve Lift with Factory Rocker Arm Ratio
- 0.648 in.
- Product Attributes - Exhaust Valve Lift with Factory Rocker Arm Ratio
- 0.648 in.
- Product Attributes - Valve Lift with Factory Rocker Arm Ratio
- 0.648 int./0.648 exh.
- Product Attributes - Lobe Separation (degrees)
- 106
- Product Attributes - Camshaft Gear Attachment
- 3-bolt
- Product Attributes - Intake Valve Lash
- 0.020 in.
- Product Attributes - Exhaust Valve Lash
- 0.022 in.
- Product Attributes - Remanufactured
- No
- Product Attributes - Computer-Controlled Compatible
- No
- Product Attributes - Grind Number
- 294RX-6
- Product Attributes - Valve Springs Required
- Yes
- Product Attributes - Quantity
- Sold individually.
- Product Attributes - Notes
- For use in blocks modified for 50mm roller cam bearings.
Reference Information
| Brand Name/s | Comp Cams |
|---|---|
| StreetFX SKU | cca12-850-9 |
| SFX Item ID | 4118862 |
| Supplier Item Code | 4118862 |
| Manufacturer SKU | 12-850-9 |
| Manufacturer UPC | 36584015727 |
| Alternative References | l46, l48, l65, lm1, lt-1, l82 |
Brochures
Compatibility
Fits Chevrolet GEN 1 Small Blocks including the 262, 265, 267, 283, 302, 305, 307, 327, 350 and 400. Does not fit LT1/LT4, or factory roller Small Blocks built from 1985 and newer. GM gradually added roller camshafts to 305's and 350's from the mid 80's forward. Camaros/Firebirds/Corvettes received the roller cams early, but many trucks and SUV's had flat tappet cams until the mid 90's. Remove the intake or timing cover to confirm whether the block is a factory roller or flat tappet. Does not fit the LS1, LS2, LS3 or any LS-based 4.8, 5.3, 5.7, 6.0 and 6.2. 1955-1957 Chevrolet 265 engines require a groove on the 5th cam journal for oiling. Contact us for more information.
Loading compatibility information...
Keep shopping
More from Comp Cams
