COMP Cams Nitrided Camshaft CS284Mhqs7
COMP Cams Nitrided Camshaft CS284Mhqs7
A$959.87
Last Available from MFR.
LAST ONE AVAILABLE from the manufacturer's distribution centre. Once sold, this item may not be immediately available again. The dispatch timeframe shown is an estimate based on historical orders for this part and is dependent on the manufacturer releasing the final available unit.
We accept
Description
Open Wheel Modified Traction Control NIT 258/264 Solid Flat Cam for SBC
Product Overview
Fits Chevrolet GEN 1 Small Blocks including the 262, 265, 267, 283, 302, 305, 307, 327, 350 and 400. Does not fit LT1/LT4, or factory roller Small Blocks built from 1985 and newer. GM gradually added roller camshafts to 305's and 350's from the mid 80's forward. Camaros/Firebirds/Corvettes received the roller cams early, but many trucks and SUV's had flat tappet cams until the mid 90's. Remove the intake or timing cover to confirm whether the block is a factory roller or flat tappet. Does not fit the LS1, LS2, LS3 or any LS-based 4.8, 5.3, 5.7, 6.0 and 6.2. 1955-1957 Chevrolet 265 engines require a groove on the 5th cam journal for oiling. Contact us for more information.
Product Details
| Advertised Exhaust Duration: | 293 |
|---|---|
| Advertised Intake Duration: | 284 |
| Amazon ASIN: | B002EE2CTM |
| Assembly Lubricant Included: | Yes |
| Basic Operating RPM Range: | 3,300-7,300 |
| C.A.R.B. E.O. Number: | N/A |
| C.A.R.B. Exempt for California Certified Vehicles Manufactured Before 1965?: | Yes, but must meet tailpipe emission standards for year of vehicle. |
| C.A.R.B. Exempt for Federally Certified Vehicles Manufactured Before 1967?: | Yes, but must meet tailpipe emission standards for year of vehicle. |
| C.A.R.B. Exempt for Foreign Vehicles Manufactured Before 1967?: | Yes, but must meet tailpipe emission standards for year of vehicle. |
| C.A.R.B. Exempt for On-Road Vehicles?: | No |
| C.A.R.B. Exempt for Racing and Off-Road Only Vehicles?: | Yes, but must be a race/competition only vehicle. |
| C.A.R.B. Exemption Reason: | N/A |
| California Proposition 65: | WARNING: Cancer and Reproductive Harm P65Warnings.ca.gov |
| Cam Type: | Solid Flat Tappet |
| Camshaft Gear Attachment: | 3-Bolt |
| Camshaft Material: | Nitrided Cast Iron |
| Camshaft Series: | Open Wheel Modified Traction Control (1.6 Rocker Ratio) |
| Description: | Open Wheel Modified Traction Control NIT 258/264 Solid Flact Cam for SBC |
| Engine Family: | Chevrolet 262-400 c.i. 8 Cylinder (1958-1998) |
| Exhaust Duration @ .050 in.: | 264 |
| Exhaust Duration at .050 inch Lift: | 264 |
| Exhaust Duration: | 293 |
| Exhaust Valve Lift(in): | 0.606 |
| Exhaust Valve Lift: | 0.606 |
| Grind Number: | 284MHQ S7 |
| Intake Duration @ .050 in.: | 258 |
| Intake Duration at .050 Inch Lift: | 258 |
| Intake Duration: | 284 |
| Intake Valve Lift(in): | 0.597 |
| Intake Valve Lift: | 0.597 |
| Lifter Type: | Solid Flat Tappet |
| Lifters Included: | No |
| Lobe Separation: | 107 |
| Part Number: | cca12-527-20 |
| RPM Range: | 3200-7200 |
| Title: | Open Wheel Modified Traction Control NIT 258/264 Solid Flact Cam for SBC |
| Usage: | Strip |
| Valve Springs Required: | Yes |
Application Summary
Fits Chevrolet GEN 1 Small Blocks including the 262, 265, 267, 283, 302, 305, 307, 327, 350 and 400. Does not fit LT1/LT4, or factory roller Small Blocks built from 1985 and newer. GM gradually added roller camshafts to 305's and 350's from the mid 80's forward. Camaros/Firebirds/Corvettes received the roller cams early, but many trucks and SUV's had flat tappet cams until the mid 90's. Remove the intake or timing cover to confirm whether the block is a factory roller or flat tappet. Does not fit the LS1, LS2, LS3 or any LS-based 4.8, 5.3, 5.7, 6.0 and 6.2. 1955-1957 Chevrolet 265 engines require a groove on the 5th cam journal for oiling. Contact us for more information.
Part Type
Engine Camshaft
Specifications
- Product Attributes - Brand
- COMP Cams
- Product Attributes - Manufacturer's Part Number
- 12-527-20
- Product Attributes - Part Type
- Camshafts
- Product Attributes - Product Line
- COMP Cams Open Wheel Modified Traction Control Camshafts
- Product Attributes - UPC
- 036584177982
- Product Attributes - Cam Style
- Solid flat tappet
- Product Attributes - Camshaft Use
- Drag race
- Product Attributes - Basic Operating RPM Range
- 3,300-7,300
- Product Attributes - Intake Duration at 050 inch Lift
- 258
- Product Attributes - Exhaust Duration at 050 inch Lift
- 264
- Product Attributes - Duration at 050 inch Lift
- 258 int./264 exh.
- Product Attributes - Advertised Intake Duration
- 284
- Product Attributes - Advertised Exhaust Duration
- 293
- Product Attributes - Advertised Duration
- 284 int./293 exh.
- Product Attributes - Intake Valve Lift with Factory Rocker Arm Ratio
- 0.597 in.
- Product Attributes - Exhaust Valve Lift with Factory Rocker Arm Ratio
- 0.606 in.
- Product Attributes - Valve Lift with Factory Rocker Arm Ratio
- 0.597 int./0.606 exh.
- Product Attributes - Lobe Separation (degrees)
- 107
- Product Attributes - Camshaft Gear Attachment
- 3-bolt
- Product Attributes - Remanufactured
- No
- Product Attributes - Computer-Controlled Compatible
- No
- Product Attributes - Grind Number
- 284MHQ S7
- Product Attributes - Valve Springs Required
- Yes
- Product Attributes - Quantity
- Sold individually.
Reference Information
| Brand Name/s | Comp Cams |
|---|---|
| StreetFX SKU | cca12-527-20 |
| SFX Item ID | 4118724 |
| Supplier Item Code | 4118724 |
| Manufacturer SKU | 12-527-20 |
| Manufacturer UPC | 36584177982 |
| Alternative References | l46, l48, l65, lm1, lt-1, l82 |
Brochures
Compatibility
Fits Chevrolet GEN 1 Small Blocks including the 262, 265, 267, 283, 302, 305, 307, 327, 350 and 400. Does not fit LT1/LT4, or factory roller Small Blocks built from 1985 and newer. GM gradually added roller camshafts to 305's and 350's from the mid 80's forward. Camaros/Firebirds/Corvettes received the roller cams early, but many trucks and SUV's had flat tappet cams until the mid 90's. Remove the intake or timing cover to confirm whether the block is a factory roller or flat tappet. Does not fit the LS1, LS2, LS3 or any LS-based 4.8, 5.3, 5.7, 6.0 and 6.2. 1955-1957 Chevrolet 265 engines require a groove on the 5th cam journal for oiling. Contact us for more information.
Loading compatibility information...
Keep shopping
More from Comp Cams
