COMP Cams Camshaft CS280TLS-6
COMP Cams Camshaft CS280TLS-6
Sale ends in Calculating...
A$717.43 A$805.55
Limited Availability from MFR
Limited stock available from the manufacturer's distribution centre. The dispatch timeframe shown is an estimate based on historical orders of this part. This item is not held in our own warehouse, and availability and release timing may vary depending on manufacturer stock movements and processing at the time of ordering.
We accept
Description
Solid: Good for 350-400 on Big 3/8 to 1/2 mile tracks with high sustained RPM. Best with Big carburetor and good intake. SBC - 1955-57 models have an oiling groove in the rear journal. The listed part numbered cams will not fit these models, so if you require a Camshaft with the oiling groove, please call us at 1-800-999-0853 or contact us, and we will assist you with placing an order.
Product Overview
Fits Chevrolet GEN 1 Small Blocks including the 262, 265, 267, 283, 302, 305, 307, 327, 350 and 400. Does not fit LT1/LT4, or factory roller Small Blocks built from 1985 and newer. GM gradually added roller camshafts to 305's and 350's from the mid 80's forward. Camaros/Firebirds/Corvettes received the roller cams early, but many trucks and SUV's had flat tappet cams until the mid 90's. Remove the intake or timing cover to confirm whether the block is a factory roller or flat tappet. Does not fit the LS1, LS2, LS3 or any LS-based 4.8, 5.3, 5.7, 6.0 and 6.2. 1955-1957 Chevrolet 265 engines require a groove on the 5th cam journal for oiling. Contact us for more information.
Product Details
| Description: | 280TLS-6 Solid Flat Camshaft for Chevrolet 265-400 Small Block |
|---|---|
| Exhaust Duration @ .050 in.: | 259 |
| Exhaust Duration: | 288-1 |
| Exhaust Valve Lift(in): | 0.55 |
| Intake Duration @ .050 in.: | 250 |
| Intake Duration: | 280-1 |
| Intake Valve Lift(in): | 0.530 |
| Lifter Type: | Mechanical Flat Tappet |
| Part Number: | cca12-512-5 |
| RPM Range: | 3000-9000 |
| Title: | Camshaft for Chevrolet 265-400 Small Block (CS280TLS-6) |
| Usage: | Strip |
Application Summary
Fits Chevrolet GEN 1 Small Blocks including the 262, 265, 267, 283, 302, 305, 307, 327, 350 and 400. Does not fit LT1/LT4, or factory roller Small Blocks built from 1985 and newer. GM gradually added roller camshafts to 305's and 350's from the mid 80's forward. Camaros/Firebirds/Corvettes received the roller cams early, but many trucks and SUV's had flat tappet cams until the mid 90's. Remove the intake or timing cover to confirm whether the block is a factory roller or flat tappet. Does not fit the LS1, LS2, LS3 or any LS-based 4.8, 5.3, 5.7, 6.0 and 6.2. 1955-1957 Chevrolet 265 engines require a groove on the 5th cam journal for oiling. Contact us for more information.
Part Type
Engine Camshaft
Specifications
- Product Attributes - Brand
- COMP Cams
- Product Attributes - Manufacturer's Part Number
- 12-512-5
- Product Attributes - Part Type
- Camshafts
- Product Attributes - Product Line
- COMP Cams Tight Lash Camshafts
- Product Attributes - UPC
- 036584642602
- Product Attributes - Cam Style
- Solid flat tappet
- Product Attributes - Camshaft Use
- Circle Track
- Product Attributes - Basic Operating RPM Range
- 3,500-6,500
- Product Attributes - Intake Duration at 050 inch Lift
- 250
- Product Attributes - Exhaust Duration at 050 inch Lift
- 259
- Product Attributes - Duration at 050 inch Lift
- 250 int./259 exh.
- Product Attributes - Advertised Intake Duration
- 280
- Product Attributes - Advertised Exhaust Duration
- 288
- Product Attributes - Advertised Duration
- 280 int./288 exh.
- Product Attributes - Intake Valve Lift with Factory Rocker Arm Ratio
- 0.530 in.
- Product Attributes - Exhaust Valve Lift with Factory Rocker Arm Ratio
- 0.550 in.
- Product Attributes - Valve Lift with Factory Rocker Arm Ratio
- 0.530 int./0.550 exh.
- Product Attributes - Lobe Separation (degrees)
- 106
- Product Attributes - Intake Valve Lash
- 0.018 in.
- Product Attributes - Exhaust Valve Lash
- 0.018 in.
- Product Attributes - Remanufactured
- No
- Product Attributes - Computer-Controlled Compatible
- No
- Product Attributes - Grind Number
- CS280TLS-6
- Product Attributes - Valve Springs Required
- Yes
- Product Attributes - Quantity
- Sold individually.
Reference Information
| Brand Name/s | Comp Cams |
|---|---|
| StreetFX SKU | cca12-512-5 |
| SFX Item ID | 4118709 |
| Supplier Item Code | 4118709 |
| Manufacturer SKU | 12-512-5 |
| Manufacturer UPC | 36584642602 |
| Alternative References | l46;, l48;, l65;, lm1;, zq3;, lt1; |
Brochures
Compatibility
Fits Chevrolet GEN 1 Small Blocks including the 262, 265, 267, 283, 302, 305, 307, 327, 350 and 400. Does not fit LT1/LT4, or factory roller Small Blocks built from 1985 and newer. GM gradually added roller camshafts to 305's and 350's from the mid 80's forward. Camaros/Firebirds/Corvettes received the roller cams early, but many trucks and SUV's had flat tappet cams until the mid 90's. Remove the intake or timing cover to confirm whether the block is a factory roller or flat tappet. Does not fit the LS1, LS2, LS3 or any LS-based 4.8, 5.3, 5.7, 6.0 and 6.2. 1955-1957 Chevrolet 265 engines require a groove on the 5th cam journal for oiling. Contact us for more information.
Loading compatibility information...
Keep shopping
More from Comp Cams
