Bmr Suspension
BMR 15-17 S550 Mustang Cradle Bushing Lockout Kit - Black Hammertone
bmrCB005H
A$400.37
BMR 78-87 G-Body w/ 3.25in Axles Rear Solid 1.375in Xtreme Anti-Roll Bar Kit - Black Hammertone
BMR 78-87 G-Body w/ 3.25in Axles Rear Solid 1.375in Xtreme Anti-Roll Bar Kit - Black Hammertone
A$1,349.81
Available from MFR.
This item is available from the manufacturer's distribution centre. The dispatch timeframe shown is an estimate based on historical order processing and release times for this part. This item is not held in our own warehouse, and actual dispatch timing may vary depending on manufacturer workload and logistics at the time of ordering.
We accept
Description
Hard launches from high horsepower cars at the drag strip require more than just a normal street-style sway bar. BMR's suspensions Xtreme Anti Roll Bar for 1978-1987 GM G-Body allows you to launch harder without excessive body roll limiting traction, with little sacrifice to your G-bodys street manners. Manufactured from 1.375-inch solid bar stock, BMRs Xtreme Anti Roll Bar (XSB010) is designed to eliminate body roll and transfer as much power as possible to the rear wheels. The XSB010 attaches to your G-Body with polyurethane bushings. These bushings are molded from 88-durometer, low-deflection, polyurethane, and are internally fluted to keep grease in the bushing under high compression loads. BMR's suspension designed the XSB010 sway bar for street performance and drag race applications. The large adjustable sway bar has two positions, giving you the versatility to drive to and from the track with the same sway bar. The XSB010 gives you a massive increase in rate over the stock bar (depending on year and model). These rate increases and adjustability allow you to almost eliminate body roll so you can leave the starting line harder with maximum traction. When performance is a must, rely on BMR's suspension!BMR's suspensions XSB010 anti roll bar is available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.!
Product Overview
Hard launches from high horsepower cars at the drag strip require more than just a normal street-style sway bar. BMR Suspensions Xtreme Anti Roll Bar for 1978-1987 GM G-Body allows you to launch harder without excessive body roll limiting traction, with little sacrifice to your G-bodys street manners. Manufactured from 1.375-inch solid bar stock, BMRs Xtreme Anti Roll Bar (XSB010) is designed to eliminate body roll and transfer as much power as possible to the rear wheels. The XSB010 attaches to your G-Body with polyurethane bushings. These bushings are molded from 88-durometer, low-deflection, polyurethane, and are internally fluted to keep grease in the bushing under high compression loads. BMR Suspension designed the XSB010 sway bar for street performance and drag race applications. The large adjustable sway bar has two positions, giving you the versatility to drive to and from the track with the same sway bar. The XSB010 gives you a massive increase in rate over the stock bar (depending on year and model). These rate increases and adjustability allow you to almost eliminate body roll so you can leave the starting line harder with maximum traction. When performance is a must, rely on BMR Suspension!BMR Suspensions XSB010 anti roll bar is available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.!
Product Details
| Description: | BMR 78-87 G-Body w/ 3.25in Axles Rear Solid 1.375in Xtreme Anti-Roll Bar Kit - Black Hammertone |
|---|---|
| Mounting Hardware Included: | Yes |
| Notes: | Includes billet sway bar saddles |
| Part Number: | bmrXSB010H |
| Position: | Rear |
| Quantity: | Sold as a kit |
| Rear Sway Bar Adjustable: | 2-position |
| Rear Sway Bar Diameter (in): | 1.375 inches |
| Rear Sway Bar Diameter (mm): | 35.0 mm |
| Rear Sway Bar Type: | Solid |
| Sway Bar Finish: | Black hammertone powdercoated |
| Sway Bar Material: | Steel |
Part Type
Coil Spring / Tie Rod Sleeve / Stabilizer Bar Kit
Specifications
- Product Attributes - UPC
- 887753331205
- Product Attributes - Brand
- BMR Suspension
- Product Attributes - Notes
- Designed for rear ends with 3.25 in. axle tube diameters only. Not compatible with small OE 7.5 in. ring gear rear ends..
- Product Attributes - Quantity
- Sold as a kit.
- Product Attributes - Part Type
- Sway Bars
- Product Attributes - Product Line
- BMR Xtreme Anti-Roll Bars
- Product Attributes - Sway Bar Color
- Black
- Product Attributes - Sway Bar Material
- Steel
- Product Attributes - Sway Bar Position
- Rear
- Product Attributes - Rear Sway Bar Type
- Solid
- Product Attributes - Rear Sway Bar Adjustable
- 2-position
- Product Attributes - Manufacturer's Part Number
- XSB010H
- Product Attributes - Mounting Hardware Included
- Yes
- Product Attributes - Rear Sway Bar Diameter (mm)
- 35.00 mm
- Product Attributes - Rear Sway Bar Diameter (in.)
- 1.375 in.
Reference Information
| Brand Name/s | Bmr Suspension |
|---|---|
| StreetFX SKU | bmrXSB010H |
| SFX Item ID | 4009095 |
| Supplier Item Code | 4009095 |
| Manufacturer SKU | XSB010H |
| Manufacturer UPC | 887753331205 |
| Alternative References | 3.25in, 1.375in |
Brochures
Compatibility
| Application Data |
|
|---|
Loading compatibility information...
Keep shopping
More from Bmr Suspension
Bmr Suspension
BMR 15-18 S550 Mustang Billet Aluminum Camber Links Adjustable (Poly/Rod ends) - Black Anodized
bmrUCA762
A$917.53
Bmr Suspension
BMR Suspension 15-18 Ford Mustang S550 Rear Camber Adjustment Lockout Kit - Black Hammertone
bmrWAK761H
A$120.31
Bmr Suspension
BMR Suspension 15-18 Ford Mustang S550 IRS Subframe Support Brace (Red)
bmrCB762R
A$566.07
