Bmr Suspension
BMR 15-17 S550 Mustang Cradle Bushing Lockout Kit - Black Hammertone
bmrCB005H
A$410.57
BMR 16-17 6th Gen Camaro Rear Hollow 32mm Adj. Sway Bar Kit - Red
BMR 16-17 6th Gen Camaro Rear Hollow 32mm Adj. Sway Bar Kit - Red
A$836.69
Limited Availability from MFR
Limited stock available from the manufacturer's distribution centre. The dispatch timeframe shown is an estimate based on historical orders of this part. This item is not held in our own warehouse, and availability and release timing may vary depending on manufacturer stock movements and processing at the time of ordering.
We accept
Description
The two primary functions of sway bars are to control body roll and to determine the understeer or oversteer behavior of a vehicle. Stock sway bars have low torsional spring rates because they are manufactured from small diameter bar stock or tubing. BMR's suspensions SB054 rear sway bar was designed by factoring in the vehicle weight, application, motion ratio, coil spring rate, and adjustability requirements. Manufactured from heavy-duty 1.25-inch DOM steel tubing, the SB054 is cold formed to better resist torsional fatigue and retain its "memory" far longer than the hot-formed bars used by many competitors. The sway bar is CNC-formed for exact manufacturing tolerances and repeatable high quality. The SB054 attaches to your 2016-newer Camaro with 95-durometer polyurethane bushings, reducing the deflection from the stock rubber bushings. These bushings are molded from 95-durometer, low-deflection, polyurethane, and are internally fluted to keep grease in the bushing.BMR's suspension designed the SB054 sway bar for street performance, autocross, and road race applications. The three-way adjustable SB054 gives you a 73%-125% increase in rate over the stock bar. The rate increases gives you improved handling characteristics so you can drive harder through corners with minimal body roll. This allows for more sway bar control, which equals better handling. When performance is a must, rely on BMR's suspension!BMR's suspensions SB054 sway bars are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.!Does Not Fit Convertible Cars
Product Overview
The two primary functions of sway bars are to control body roll and to determine the understeer or oversteer behavior of a vehicle. Stock sway bars have low torsional spring rates because they are manufactured from small diameter bar stock or tubing. BMR Suspensions SB054 rear sway bar was designed by factoring in the vehicle weight, application, motion ratio, coil spring rate, and adjustability requirements. Manufactured from heavy-duty 1.25-inch DOM steel tubing, the SB054 is cold formed to better resist torsional fatigue and retain its "memory" far longer than the hot-formed bars used by many competitors. The sway bar is CNC-formed for exact manufacturing tolerances and repeatable high quality. The SB054 attaches to your 2016-newer Camaro with 95-durometer polyurethane bushings, reducing the deflection from the stock rubber bushings. These bushings are molded from 95-durometer, low-deflection, polyurethane, and are internally fluted to keep grease in the bushing.BMR Suspension designed the SB054 sway bar for street performance, autocross, and road race applications. The three-way adjustable SB054 gives you a 73%-125% increase in rate over the stock bar. The rate increases gives you improved handling characteristics so you can drive harder through corners with minimal body roll. This allows for more sway bar control, which equals better handling. When performance is a must, rely on BMR Suspension!BMR Suspensions SB054 sway bars are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.!Does Not Fit Convertible Cars
Product Details
| Description: | BMR 16-17 6th Gen Camaro Rear Hollow 32mm Adj. Sway Bar Kit - Red |
|---|---|
| Mounting Hardware Included: | Yes |
| Part Number: | bmrSB054R |
| Position: | Rear |
| Quantity: | Sold as a kit |
| Rear Sway Bar Adjustable: | 3-position |
| Rear Sway Bar Diameter (in): | 1.25 inches |
| Rear Sway Bar Diameter (mm): | 32.0 mm |
| Rear Sway Bar Type: | Hollow |
| Sway Bar Finish: | Red powdercoated |
| Sway Bar Material: | Steel |
Part Type
Coil Spring / Tie Rod Sleeve / Stabilizer Bar Kit
Specifications
- Product Attributes - UPC
- 887753326461
- Product Attributes - Brand
- BMR Suspension
- Product Attributes - Quantity
- Sold as a kit.
- Product Attributes - Part Type
- Sway Bars
- Product Attributes - Product Line
- BMR Sway Bars
- Product Attributes - Sway Bar Color
- Red
- Product Attributes - Sway Bar Material
- Steel
- Product Attributes - Sway Bar Position
- Rear
- Product Attributes - Rear Sway Bar Type
- Hollow
- Product Attributes - Rear Sway Bar Adjustable
- 3-position
- Product Attributes - Manufacturer's Part Number
- SB054R
- Product Attributes - Mounting Hardware Included
- Yes
- Product Attributes - Rear Sway Bar Diameter (mm)
- 31.75 mm
- Product Attributes - Rear Sway Bar Diameter (in.)
- 1.250 in.
Reference Information
| Brand Name/s | Bmr Suspension |
|---|---|
| StreetFX SKU | bmrSB054R |
| SFX Item ID | 4008641 |
| Supplier Item Code | 4008641 |
| Manufacturer SKU | SB054R |
| Manufacturer UPC | 887753326461 |
| Alternative References | 6th, 32mm |
Brochures
Compatibility
| Application Data |
|
|---|
Loading compatibility information...
Keep shopping
More from Bmr Suspension
Bmr Suspension
BMR 15-18 S550 Mustang Billet Aluminum Camber Links Adjustable (Poly/Rod ends) - Black Anodized
bmrUCA762
A$917.53
Bmr Suspension
BMR Suspension 15-18 Ford Mustang S550 Rear Camber Adjustment Lockout Kit - Black Hammertone
bmrWAK761H
A$137.63
Bmr Suspension
BMR Suspension 15-18 Ford Mustang S550 IRS Subframe Support Brace (Red)
bmrCB762R
A$566.07
