Bmr Suspension
BMR 15-17 S550 Mustang Cradle Bushing Lockout Kit - Black Hammertone
bmrCB005H
A$410.57
BMR 16-20 6th Gen Camaro Front & Rear Sway Bar Kit w/ Bushings - Black Hammertone
BMR 16-20 6th Gen Camaro Front & Rear Sway Bar Kit w/ Bushings - Black Hammertone
A$1,200.75
Available from MFR.
This item is available from the manufacturer's distribution centre. The dispatch timeframe shown is an estimate based on historical order processing and release times for this part. This item is not held in our own warehouse, and actual dispatch timing may vary depending on manufacturer workload and logistics at the time of ordering.
We accept
Description
These bushings are molded from 88-durometer, low-deflection, polyurethane, and are internally fluted to keep grease in the bushing.BMR's suspension designed the SB049 sway bar kit for street performance, autocross, and road race applications. The large sway bars single position give you the ability to drive to and from the road course or autocross and still out handle the competition with the same sway bars. The SB049 front sway bar gives you a 62% increase in sway bar rate, and the rear bar gives you a 52 increase in rate over the stock bar. These rate increases allow you to drive harder through corners with minimal body roll. The hollow design allows for loads of strength in the lightest package possible. This means increased performance with no sacrifices. The SB049 attaches to your Camaro with 88-durometer polyurethane bushings, reducing the deflection from the stock rubber bushings. This allows for more sway bar control, which equals better handling. When performance is a must, rely on BMR's suspension!BMR's suspensions SB049 sway bar kit is available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 3-4 hours. Proudly made in the U.S.A.!Does Not Fit Convertible Cars
Product Overview
Fits 2016-Newer Chevrolet Camaro(excluding cars with ELSD);Designed for street performance, autocross, and road race applications;Dramatically reduces body roll;62% increase in sway bar rate (front), 52% increase in sway bar rate (rear);Cold formed to better resist torsional fatigue;Manufactured from 1.25-inch heavy-wall DOM tubing for increased strength;88-durometer, greasable polyurethane bushings;Zinc-plated inner sleeves;Billet aluminum, black anodized bushings saddles;Durable powdercoat finish;3-4 hour installation time;Proudly designed in the U.S.A.;Proudly made in the U.S.A.
Product Details
| Description: | BMR 16-20 6th Gen Camaro Front & Rear Sway Bar Kit w/ Bushings - Black Hammertone |
|---|---|
| Front Sway Bar Adjustable: | Fixed |
| Front Sway Bar Diameter (in): | 1.25 inches |
| Front Sway Bar Diameter (mm): | 32.0 mm |
| Front Sway Bar Type: | Hollow |
| Mounting Hardware Included: | Yes |
| Part Number: | bmrSB049H |
| Position: | Front and rear |
| Quantity: | Sold as a kit |
| Rear Sway Bar Adjustable: | Fixed |
| Rear Sway Bar Diameter (in): | 1.25 inches |
| Rear Sway Bar Diameter (mm): | 32.0 mm |
| Rear Sway Bar Type: | Hollow |
| Sway Bar Finish: | Black hammertone powdercoated |
| Sway Bar Material: | Steel |
Part Type
Coil Spring / Tie Rod Sleeve / Stabilizer Bar Kit
Specifications
- Product Attributes - UPC
- 887753326355
- Product Attributes - Brand
- BMR Suspension
- Product Attributes - Notes
- Does not fit convertible.
- Product Attributes - Quantity
- Sold as a kit.
- Product Attributes - Part Type
- Sway Bars
- Product Attributes - Product Line
- BMR Sway Bars
- Product Attributes - Sway Bar Color
- Black
- Product Attributes - Sway Bar Material
- Steel
- Product Attributes - Sway Bar Position
- Front and Rear
- Product Attributes - Rear Sway Bar Type
- Hollow
- Product Attributes - Front Sway Bar Type
- Hollow
- Product Attributes - Rear Sway Bar Adjustable
- Fixed
- Product Attributes - Front Sway Bar Adjustable
- Fixed
- Product Attributes - Manufacturer's Part Number
- SB049H
- Product Attributes - Mounting Hardware Included
- Yes
- Product Attributes - Rear Sway Bar Diameter (mm)
- 31.75 mm
- Product Attributes - Front Sway Bar Diameter (mm)
- 31.75 mm
- Product Attributes - Rear Sway Bar Diameter (in.)
- 1.250 in.
- Product Attributes - Front Sway Bar Diameter (in.)
- 1.250 in.
Reference Information
| Brand Name/s | Bmr Suspension |
|---|---|
| StreetFX SKU | bmrSB049H |
| SFX Item ID | 4009255 |
| Supplier Item Code | 4009255 |
| Manufacturer SKU | SB049H |
| Manufacturer UPC | 887753326355 |
| Alternative References | 6th |
Brochures
Compatibility
Loading compatibility information...
Keep shopping
More from Bmr Suspension
Bmr Suspension
BMR 15-18 S550 Mustang Billet Aluminum Camber Links Adjustable (Poly/Rod ends) - Black Anodized
bmrUCA762
A$917.53
Bmr Suspension
BMR Suspension 15-18 Ford Mustang S550 Rear Camber Adjustment Lockout Kit - Black Hammertone
bmrWAK761H
A$137.63
Bmr Suspension
BMR Suspension 15-18 Ford Mustang S550 IRS Subframe Support Brace (Red)
bmrCB762R
A$566.07
