Bmr Suspension
BMR 15-17 S550 Mustang Cradle Bushing Lockout Kit - Black Hammertone
bmrCB005H
A$400.37
BMR 13-15 5th Gen Camaro Front & Rear Sway Bar Kit w/ Bushings - Red
BMR 13-15 5th Gen Camaro Front & Rear Sway Bar Kit w/ Bushings - Red
A$1,216.73
LOW STOCK! Est Ship 3-5 days.
HURRY! LOW STOCK. This item is in limited stock at one of our distribution centres. The ETA is the approximate time required to prepare your order for dispatch.
We accept
Description
This allows for more sway bar control, and more control equals better handling. When performance is a must, rely on BMR's suspension!BMR's suspensions SB039 sway bars are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 3-4 hours. Proudly made in the U.S.A.!FRONT Hole 1 (Boot-Leg end of bracket) 98% stiffer than OE bar Hole 2 (Center) 146% stiffer than OE bar Hole 3 (Flat end of bracket) 214% stiffer than OE bar.REAR OE SS bar (FE4)-Hole number 1 provides just over 100% increase in rate over the factory FE4 bar-Hole number 2 is 150%-Hole number 3 is 200%OE ZL1 bar (FE5)-Hole number 1 provides just over 25% increase in rate over the factory FE4 bar-Hole number 2 is 40%-Hole number 3 is 75%FITMENT NOTE: SB033 IS DESIGNED AS A DIRECT REPLACEMENT FOR FE4 REAR suspensionsYSTEMS, WHERE THE SWAY BAR END LINKS ARE LOCATED OUTBOARD OF THE REAR SHOCKS. THIS INCLUDES 2012+ ZL1 AND 2013+ SS. 2010-2012 SS MAY UPGRADE TO THIS FE4 BAR IF REAR LOWER CONTROL ARMS AND REAR SWAY BAR END LINKS ARE UPGRADED TO FE4 SPEC. SB033 WILL NOT FIT ON V6 APPLICATION DUE TO INTERFERENCE WITH REAR V6 BRAKE CALIPERS.WILL NOT FIT A CONVERTIBLE.
Product Overview
The hollow design allows for loads of strength in the lightest package possible. This means increased performance with no sacrifices. The SB039 attaches to your Camaro with 88-durometer polyurethane bushings, reducing the deflection from the stock rubber bushings. This allows for more sway bar control, and more control equals better handling. When performance is a must, rely on BMR Suspension!BMR Suspensions SB039 sway bars are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 3-4 hours. Proudly made in the U.S.A.!FRONTHole 1 (Boot-Leg end of bracket)98% stiffer than OE barHole 2 (Center)146% stiffer than OE barHole 3 (Flat end of bracket)214% stiffer than OE barREAROE SS bar (FE4)-Hole number 1 provides just over 100% increase in rate over the factory FE4 bar-Hole number 2 is 150%-Hole number 3 is 200%OE ZL1 bar (FE5)-Hole number 1 provides just over 25% increase in rate over the factory FE4 bar-Hole number 2 is 40%-Hole number 3 is 75%FITMENT NOTE: SB033 IS DESIGNED AS A DIRECT REPLACEMENT FOR FE4 REAR SUSPENSION SYSTEMS, WHERE THE SWAY BAR END LINKS ARE LOCATED OUTBOARD OF THE REAR SHOCKS. THIS INCLUDES 2012+ ZL1 AND 2013+ SS. 2010-2012 SS MAY UPGRADE TO THIS FE4 BAR IF REAR LOWER CONTROL ARMS AND REAR SWAY BAR END LINKS ARE UPGRADED TO FE4 SPEC. SB033 WILL NOT FIT ON V6 APPLICATION DUE TO INTERFERENCE WITH REAR V6 BRAKE CALIPERS.WILL NOT FIT A CONVERTIBLE.
Product Details
| Description: | BMR 13-15 5th Gen Camaro Front & Rear Sway Bar Kit w/ Bushings - Red |
|---|---|
| Front Sway Bar Adjustable: | 3-position |
| Front Sway Bar Diameter (in): | 1.125 inches |
| Front Sway Bar Diameter (mm): | 29.0 mm |
| Front Sway Bar Type: | Hollow |
| Mounting Hardware Included: | Yes |
| Part Number: | bmrSB039R |
| Position: | Front and rear |
| Quantity: | Sold as a kit |
| Rear Sway Bar Adjustable: | 3-position |
| Rear Sway Bar Diameter (in): | 1.25 inches |
| Rear Sway Bar Diameter (mm): | 32.0 mm |
| Rear Sway Bar Type: | Hollow |
| Sway Bar Finish: | Red powdercoated |
| Sway Bar Material: | Steel |
Part Type
Coil Spring / Tie Rod Sleeve / Stabilizer Bar Kit
Specifications
- Product Attributes - Brand
- BMR Suspension
- Product Attributes - Manufacturer's Part Number
- SB039R
- Product Attributes - Part Type
- Sway Bars
- Product Attributes - Product Line
- BMR Sway Bars
- Product Attributes - UPC
- 887753326249
- Product Attributes - Sway Bar Position
- Front and Rear
- Product Attributes - Front Sway Bar Type
- Hollow
- Product Attributes - Front Sway Bar Adjustable
- 3-position
- Product Attributes - Rear Sway Bar Type
- Hollow
- Product Attributes - Rear Sway Bar Adjustable
- 3-position
- Product Attributes - Front Sway Bar Diameter (in.)
- 1.141 in.
- Product Attributes - Front Sway Bar Diameter (mm)
- 29.00 mm
- Product Attributes - Rear Sway Bar Diameter (in.)
- 1.250 in.
- Product Attributes - Rear Sway Bar Diameter (mm)
- 32.00 mm
- Product Attributes - Mounting Hardware Included
- Yes
- Product Attributes - Sway Bar Color
- Red
- Product Attributes - Sway Bar Material
- Steel
- Product Attributes - Quantity
- Sold as a kit.
- Product Attributes - Notes
- Designed as a direct replacement for FE4 suspension systems.
Reference Information
| Brand Name/s | Bmr Suspension |
|---|---|
| StreetFX SKU | bmrSB039R |
| SFX Item ID | 4008623 |
| Supplier Item Code | 4008623 |
| Manufacturer SKU | SB039R |
| Manufacturer UPC | 887753326249 |
| Alternative References | 5th |
Brochures
Compatibility
Loading compatibility information...
Keep shopping
More from Bmr Suspension
Bmr Suspension
BMR 15-18 S550 Mustang Billet Aluminum Camber Links Adjustable (Poly/Rod ends) - Black Anodized
bmrUCA762
A$917.53
Bmr Suspension
BMR Suspension 15-18 Ford Mustang S550 Rear Camber Adjustment Lockout Kit - Black Hammertone
bmrWAK761H
A$120.31
Bmr Suspension
BMR Suspension 15-18 Ford Mustang S550 IRS Subframe Support Brace (Red)
bmrCB762R
A$566.07
