Bmr Suspension
BMR 15-17 S550 Mustang Cradle Bushing Lockout Kit - Black Hammertone
bmrCB005H
A$400.37
BMR 13-15 5th Gen Camaro Front Hollow 29mm Adj. Sway Bar Kit w/ Bushings - Red
BMR 13-15 5th Gen Camaro Front Hollow 29mm Adj. Sway Bar Kit w/ Bushings - Red
A$567.44
Available from MFR.
This item is available from the manufacturer's distribution centre. The dispatch timeframe shown is an estimate based on historical order processing and release times for this part. This item is not held in our own warehouse, and actual dispatch timing may vary depending on manufacturer workload and logistics at the time of ordering.
We accept
Description
The two primary functions of sway bars are to control body roll and to determine the understeer or oversteer behavior of a vehicle. Stock sway bars have low torsional spring rates because they are manufactured from small diameter bar stock or tubing. BMR's suspensions SB038 front sway bar was designed by factoring in the vehicle weight, application, motion ratio, coil spring rate, and adjustability requirements. Manufactured from heavy-wall 29mm DOM tubing, the SB038 is cold formed to better resist torsional fatigue and retain its "memory" far longer than the hot-formed bars used by many competitors. The sway bar is CNC-formed for exact manufacturing tolerances and repeatable high quality. Thrust washers are welded to the bar to locate the sway bar bushing mounts. This is critical as it properly locates the sway bar and prevents lateral movement during hard cornering maneuvers. The sway bar mounts to the car using polyurethane bushings. These bushings are molded from 88-durometer, low-deflection, polyurethane, and are internally fluted to keeps grease in the bushing.
Product Overview
This means increased performance with no sacrifices. The SB038 attaches to your Camaro with 88-durometer polyurethane bushings, reducing the deflection from the stock rubber bushings. This allows for more sway bar control, and more control equals better handling. When performance is a must, rely on BMR Suspension!BMR Suspensions SB038 sway bars are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.!FITMENT NOTE: SB038 IS DESIGNED AS A DIRECT REPLACEMENT UPGRADE FOR FE4 FRONT SUSPENSION SYSTEMS, WHICH HAVE LARGER 12MM STUD FRONT SWAY BAR END LINKS AND ELECTRIC STEERING. WILL ALSO FIT ON 2010+ SS OR V6 (WITH HYDRAULIC STEERING RACK) IF USED WITH ELK011 FRONT END LINKS (WILL REQUIRE UPPER END LINK MOUNT TAB HOLE TO BE ENLARGED ON FRONT STRUTS TO ACCOMMODATE LARGER 12MM STUD).WILL NOT FIT A CONVERTIBLE.Hole 1 (Boot-Leg end of bracket)98% stiffer than OE barHole 2 (Center)146% stiffer than OE barHole 3 (Flat end of bracket)214% stiffer than OE bar
Product Details
| Description: | BMR 13-15 5th Gen Camaro Front Hollow 29mm Adj. Sway Bar Kit w/ Bushings - Red |
|---|---|
| Front Sway Bar Adjustable: | 3-position |
| Front Sway Bar Diameter (in): | 1.125 inches |
| Front Sway Bar Diameter (mm): | 29.0 mm |
| Front Sway Bar Type: | Hollow |
| Mounting Hardware Included: | No |
| Part Number: | bmrSB038R |
| Position: | Front |
| Quantity: | Sold as a kit |
| Sway Bar Finish: | Red powdercoated |
| Sway Bar Material: | Steel |
Part Type
Coil Spring / Tie Rod Sleeve / Stabilizer Bar Kit
Specifications
- Product Attributes - UPC
- 887753326225
- Product Attributes - Brand
- BMR Suspension
- Product Attributes - Notes
- Designed as a direct replacement for FE4 suspension systems.
- Product Attributes - Quantity
- Sold as a kit.
- Product Attributes - Part Type
- Sway Bars
- Product Attributes - Product Line
- BMR Sway Bars
- Product Attributes - Sway Bar Color
- Red
- Product Attributes - Sway Bar Material
- Steel
- Product Attributes - Sway Bar Position
- Front
- Product Attributes - Front Sway Bar Type
- Hollow
- Product Attributes - Front Sway Bar Adjustable
- 3-position
- Product Attributes - Manufacturer's Part Number
- SB038R
- Product Attributes - Mounting Hardware Included
- Yes
- Product Attributes - Front Sway Bar Diameter (mm)
- 29.00 mm
- Product Attributes - Front Sway Bar Diameter (in.)
- 1.141 in.
Reference Information
| Brand Name/s | Bmr Suspension |
|---|---|
| StreetFX SKU | bmrSB038R |
| SFX Item ID | 4008622 |
| Supplier Item Code | 4008622 |
| Manufacturer SKU | SB038R |
| Manufacturer UPC | 887753326225 |
| Alternative References | 5th, 29mm |
Brochures
Compatibility
| Application Data |
|
|---|
Loading compatibility information...
Keep shopping
More from Bmr Suspension
Bmr Suspension
BMR 15-18 S550 Mustang Billet Aluminum Camber Links Adjustable (Poly/Rod ends) - Black Anodized
bmrUCA762
A$917.53
Bmr Suspension
BMR Suspension 15-18 Ford Mustang S550 Rear Camber Adjustment Lockout Kit - Black Hammertone
bmrWAK761H
A$120.31
Bmr Suspension
BMR Suspension 15-18 Ford Mustang S550 IRS Subframe Support Brace (Red)
bmrCB762R
A$566.07
