Bmr Suspension
BMR 15-17 S550 Mustang Cradle Bushing Lockout Kit - Black Hammertone
bmrCB005H
A$413.07
BMR 64-72 A-Body Rear Pro-Touring Style Hollow 1.125in Sway Bar Kit - Black Hammertone
BMR 64-72 A-Body Rear Pro-Touring Style Hollow 1.125in Sway Bar Kit - Black Hammertone
A$1,147.05
Limited Availability from MFR
Limited stock available from the manufacturer's distribution centre. The dispatch timeframe shown is an estimate based on historical orders of this part. This item is not held in our own warehouse, and availability and release timing may vary depending on manufacturer stock movements and processing at the time of ordering.
We accept
Description
Greatly reduce body roll and improve the cornering capabilities of your 1964-1972 A-Body with a Pro-Touring Rear Sway Bar Kit from BMR's suspension! Stock and aftermarket sway bars are great for reducing body roll and improving handling, but can be inadequate when autocrossing or road racing in high horsepower cars. BMRs Pro-Touring Rear Sway Bar Kit (SB035) dramatically increases sway bar rate and is designed for max effort street performance, autocross, and road racing applications. When performance is a must, rely on BMR's suspension!
Product Overview
Sway bars do a great job of controlling body roll on the street, but are usually not recommended for high horsepower cars on the road course or autocross. BMR Suspensions Pro Touring Sway Bar for 1964-1972 GM A-Body allows you to drive harder without excessive body roll limiting handling. Manufactured from heavy-wall 1.125-inch DOM tubing, BMRs Pro Touring Sway Bar (SB035) is designed to eliminate body roll and keep the body as flat as possible in the turns. The SB035 attaches to youre A-Body with polyurethane bushings, reducing the deflection from the stock rubber bushings. These bushings are molded from 95-durometer, low-deflection, polyurethane, and are internally fluted to keep grease in the bushing under high compression loads. The fabricated laser cut, steel sway bar mounts are reinforced to add strength and minimize deflection.BMR Suspension designed the SB035 sway bar for street performance and handling applications. The large adjustable sway bar has three positions, giving you the versatility to drive to and from the track with the same sway bar. The SB035 gives you a massive increase in rate over the stock bar (depending on year and model). These rate increases and adjustability allow you to almost eliminate body roll so you can navigate the road course or autocross with maximum traction. The hollow design gives you loads of strength without adding a lot of weight. This allows for more body roll control, which equals more traction and consistent lap times. When performance is a must, rely on BMR Suspension!BMR Suspensions SB035 Pro Touring Sway Bar is available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.!
Product Details
| Description: | BMR 64-72 A-Body Rear Pro-Touring Style Hollow 1.125in Sway Bar Kit - Black Hammertone |
|---|---|
| Mounting Hardware Included: | Yes |
| Part Number: | bmrSB035H |
| Position: | Rear |
| Quantity: | Sold as a kit |
| Rear Sway Bar Adjustable: | 3-position |
| Rear Sway Bar Diameter (in): | 1.125 inches |
| Rear Sway Bar Diameter (mm): | 29.0 mm |
| Rear Sway Bar Type: | Hollow |
| Sway Bar Finish: | Black hammertone powdercoated |
| Sway Bar Material: | Steel |
Part Type
Coil Spring / Tie Rod Sleeve / Stabilizer Bar Kit
Specifications
- Product Attributes - UPC
- 887753326171
- Product Attributes - Brand
- BMR Suspension
- Product Attributes - Quantity
- Sold as a kit.
- Product Attributes - Part Type
- Sway Bars
- Product Attributes - Product Line
- BMR Sway Bars
- Product Attributes - Sway Bar Color
- Black
- Product Attributes - Sway Bar Material
- Steel
- Product Attributes - Sway Bar Position
- Rear
- Product Attributes - Rear Sway Bar Type
- Hollow
- Product Attributes - Rear Sway Bar Adjustable
- 3-position
- Product Attributes - Manufacturer's Part Number
- SB035H
- Product Attributes - Mounting Hardware Included
- Yes
- Product Attributes - Rear Sway Bar Diameter (mm)
- 28.58 mm
- Product Attributes - Rear Sway Bar Diameter (in.)
- 1.125 in.
Reference Information
| Brand Name/s | Bmr Suspension |
|---|---|
| StreetFX SKU | bmrSB035H |
| SFX Item ID | 4008618 |
| Supplier Item Code | 4008618 |
| Manufacturer SKU | SB035H |
| Manufacturer UPC | 887753326171 |
| Alternative References | 1.125in |
Brochures
Compatibility
| Application Data |
|
|---|
Loading compatibility information...
Keep shopping
More from Bmr Suspension
Bmr Suspension
BMR 15-18 S550 Mustang Billet Aluminum Camber Links Adjustable (Poly/Rod ends) - Black Anodized
bmrUCA762
A$917.53
Bmr Suspension
BMR Suspension 15-18 Ford Mustang S550 Rear Camber Adjustment Lockout Kit - Black Hammertone
bmrWAK761H
A$138.48
Bmr Suspension
BMR Suspension 15-18 Ford Mustang S550 IRS Subframe Support Brace (Red)
bmrCB762R
A$566.07
