BMR 64-72 A-Body Rear Solid 1.0in Sway Bar Kit - Black Hammertone

SKU: BMRSB009H

Sway Bars

BMR Sway Bar Kits...

BMR 64-72 A-Body Rear Solid 1.0in Sway Bar Kit - Black Hammertone

Bmr Suspension

BMR 64-72 A-Body Rear Solid 1.0in Sway Bar Kit - Black Hammertone

SKU: BMRSB009H

Sway Bars

BMR Sway Bar Kits...

Available from MFR. This item is available from the manufacturer's distribution centre. The dispatch timeframe shown is an estimate based on historical order processing and release times for this part. This item is not held in our own warehouse, and actual dispatch timing may vary depending on manufacturer workload and logistics at the time of ordering.

We accept

Description

Reduce body roll and improve the handling of your 1964-1972 A-Body with a Rear Sway Bar Kit from BMR's suspension! Stock sway bars have low torsional spring rates because they are manufactured from small diameter bar stock or tubing. BMRs Non-Adjustable Rear Sway Bar Kit (SB009) increases sway bar rate and is designed for street performance, autocross, and road racing applications. When performance is a must, rely on BMR's suspension!

Product Overview

The two primary functions of sway bars are to control body roll and to determine the understeer or oversteer behavior of a vehicle. Stock sway bars have low torsional spring rates because they are manufactured from small diameter bar stock or tubing. BMR Suspensions SB009 rear sway bar was designed by factoring in the vehicle weight, application, motion ratio, coil spring rate, and adjustability requirements. Manufactured from heavy-duty, solid 1-inch bar stock, the SB009 is cold formed to better resist torsional fatigue and retain its "memory" far longer than the hot-formed bars used by many competitors. The sway bar is CNC-formed for exact manufacturing tolerances and repeatable high quality. The sway bar mounts to the car using the factory mounting locations in the lower control arms. BMR Suspension designed the SB009 sway bar for street performance, autocross, and road race applications. The rear sway bar gives you a 200% increase in sway bar rate. This rate increase allows you to drive harder through corners with minimal body roll. The SB009 attaches to your A-body using the factory sway bar mounts. This allows for more sway bar control, and more control equals better handling. When performance is a must, rely on BMR Suspension! BMR Suspensions SB009 sway bars are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.!

Product Details

Description:	BMR 64-72 A-Body Rear Solid 1.0in Sway Bar Kit - Black Hammertone
Front Sway Bar Adjustable:	Fixed
Front Sway Bar Diameter (in):	1.00 inches
Front Sway Bar Diameter (mm):	25.0 mm
Front Sway Bar Type:	Solid
Mounting Hardware Included:	Yes
Part Number:	bmrSB009H
Position:	Rear
Quantity:	Sold as a kit
Sway Bar Finish:	Black hammertone powdercoated
Sway Bar Material:	Steel

Part Type

Coil Spring / Tie Rod Sleeve / Stabilizer Bar Kit

Data: v4.2 - Upd: 2026-10-16 02:08:55

Specifications

Product Attributes - Brand: BMR Suspension
Product Attributes - Manufacturer's Part Number: SB009H
Product Attributes - Part Type: Sway Bars
Product Attributes - Product Line: BMR Sway Bars
Product Attributes - UPC: 887753325846
Product Attributes - Sway Bar Position: Rear
Product Attributes - Rear Sway Bar Type: Solid
Product Attributes - Rear Sway Bar Adjustable: Fixed
Product Attributes - Rear Sway Bar Diameter (in.): 1.000 in.
Product Attributes - Rear Sway Bar Diameter (mm): 25.40 mm
Product Attributes - Mounting Hardware Included: Yes
Product Attributes - Sway Bar Color: Black
Product Attributes - Sway Bar Material: Steel
Product Attributes - Quantity: Sold as a kit.

Reference Information

Brand Name/s	Bmr Suspension
StreetFX SKU	bmrSB009H
SFX Item ID	4008588
Supplier Item Code	4008588
Manufacturer SKU	SB009H
Manufacturer UPC	887753325846
Alternative References	1.0in