Description

The two primary functions of sway bars are to control body roll and to determine the understeer or oversteer behavior of a vehicle. Stock sway bars have low torsional spring rates because they are manufactured from small diameter bar stock or tubing. BMR's suspensions SB006 front sway bar was designed by factoring in the vehicle weight, application, motion ratio, coil spring rate, and adjustability requirements. Manufactured from heavy-duty, solid 32mm bar stock, the SB006 is cold formed to better resist torsional fatigue and retain its "memory" far longer than the hot-formed bars used by many competitors. The sway bar is CNC-formed for exact manufacturing tolerances and repeatable high quality. The sway bar mounts to the car using polyurethane bushings. These bushings are molded from 88-durometer, low-deflection, polyurethane, and are internally fluted to keeps grease in the bushing. The steel sway bar mounting brackets are reinforced to minimize deflection.BMR's suspension designed the SB006 sway bar for street performance, autocross, and road race applications. The SB006 front sway bar gives you a 99% increase in sway bar rate. These rate increases and adjustability allow you to fine-tune the handling characteristics of your B-body so you can drive harder through corners with minimal body roll. The SB006 attaches to your B-body with 88-durometer polyurethane bushings, reducing the deflection from the stock rubber bushings. This allows for more sway bar control, and more control equals better handling. When performance is a must, rely on BMR's suspension!BMR's suspensions SB006 sway bars are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.!Shipped complete with all required bushings and hardware.

Product Overview

The two primary functions of sway bars are to control body roll and to determine the understeer or oversteer behavior of a vehicle. Stock sway bars have low torsional spring rates because they are manufactured from small diameter bar stock or tubing. BMR Suspensions SB006 front sway bar was designed by factoring in the vehicle weight, application, motion ratio, coil spring rate, and adjustability requirements. Manufactured from heavy-duty, solid 32mm bar stock, the SB006 is cold formed to better resist torsional fatigue and retain its "memory" far longer than the hot-formed bars used by many competitors. The sway bar is CNC-formed for exact manufacturing tolerances and repeatable high quality. The sway bar mounts to the car using polyurethane bushings. These bushings are molded from 88-durometer, low-deflection, polyurethane, and are internally fluted to keeps grease in the bushing. The steel sway bar mounting brackets are reinforced to minimize deflection. BMR Suspension designed the SB006 sway bar for street performance, autocross, and road race applications. The SB006 front sway bar gives you a 99% increase in sway bar rate. These rate increases and adjustability allow you to fine-tune the handling characteristics of your B-body so you can drive harder through corners with minimal body roll. The SB006 attaches to your B-body with 88-durometer polyurethane bushings, reducing the deflection from the stock rubber bushings. This allows for more sway bar control, and more control equals better handling. When performance is a must, rely on BMR Suspension! BMR Suspensions SB006 sway bars are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.! Shipped complete with all required bushings and hardware.

Product Details

Description:	BMR 91-96 B-Body Front Solid 32mm Sway Bar Kit w/ Bushings - Red
Front Sway Bar Adjustable:	Fixed
Front Sway Bar Diameter (in):	1.25 inches
Front Sway Bar Diameter (mm):	32.0 mm
Front Sway Bar Type:	Solid
Mounting Hardware Included:	Yes
Part Number:	bmrSB006R
Position:	Front
Quantity:	Sold as a kit
Sway Bar Finish:	Red powdercoated
Sway Bar Material:	Steel

Kit Options

This item is available as a full kit.
Select a kit option in the following table if you are looking for this item in a bundle form with all associated components.

Kit option/s:

Thumb	SKU	Kit Title
	bmrSBP006R	BMR 91-96 Chevrolet Impala SS / Caprice Sway Bar Package - Red (1x bmrSB006R, 1x bmrXSB003R)

Data: v4.2 - Upd: 2026-10-14 11:42:34

Specifications

Product Attributes - UPC

887753325815

Product Attributes - Brand

BMR Suspension

Product Attributes - Quantity

Sold as a kit.

Product Attributes - Part Type

Sway Bars

Product Attributes - Product Line

BMR Sway Bars

Product Attributes - Sway Bar Color

Red

Product Attributes - Sway Bar Material

Steel

Product Attributes - Sway Bar Position

Front

Product Attributes - Front Sway Bar Type

Solid

Product Attributes - Front Sway Bar Adjustable

Fixed

Product Attributes - Manufacturer's Part Number

SB006R

Product Attributes - Mounting Hardware Included

Yes

Product Attributes - Front Sway Bar Diameter (mm)

31.75 mm

Product Attributes - Front Sway Bar Diameter (in.)

1.250 in.

Compatibility