BMR 82-02 3rd Gen F-Body Rear Hollow 25mm Sway Bar Kit w/ Bushings - Red

SKU: BMRSB003R

Sway Bars

BMR Sway Bar Kits...

BMR 82-02 3rd Gen F-Body Rear Hollow 25mm Sway Bar Kit w/ Bushings - Red

Bmr Suspension

BMR 82-02 3rd Gen F-Body Rear Hollow 25mm Sway Bar Kit w/ Bushings - Red

SKU: BMRSB003R

Sway Bars

BMR Sway Bar Kits...

IN STOCK! Est Ship 3-5 days. This item is IN STOCK at one of our warehouses or distribution centres, the ETA is the approximate time required to prepare your order for dispatch.

We accept

Description

The two primary functions of sway bars are to control body roll and to determine the understeer or oversteer behavior of a vehicle. Stock sway bars have low torsional spring rates because they are manufactured from small diameter bar stock or tubing. BMR's suspensions SB003 rear sway bar was designed by factoring in the vehicle weight, application, motion ratio, coil spring rate, and adjustability requirements. Manufactured from heavy-wall 25mm DOM tubing, the SB003 is cold formed to better resist torsional fatigue and retain its "memory" far longer than the hot-formed bars used by many competitors. The sway bar is CNC-formed for exact manufacturing tolerances and repeatable high quality. The SB003 attaches to your Camaro with 88-durometer polyurethane bushings, reducing the deflection from the stock rubber bushings. These bushings are molded from 88-durometer, low-deflection, polyurethane, and are internally fluted to keeps grease in the bushing. The fabricated laser cut, TIG-welded steel sway bar end links are reinforced to minimize deflection.BMR's suspension designed the SB003 sway bar for street performance, drag race, autocross, and road race applications. The SB003 gives you a 149% increase in rate over the stock bar (depending on year and model). These rate increases allow you to fine-tune the handling characteristics of the suspensions you can drive harder through corners with minimal body roll. The hollow design allows for loads of strength without adding a lot of weight. This allows for more sway bar control, which equals better handling. When performance is a must, rely on BMR's suspension!BMR's suspensions SB003 sway bars are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.!All kits come with polyurethane mounting bushings and end link kits.

Product Overview

The two primary functions of sway bars are to control body roll and to determine the understeer or oversteer behavior of a vehicle. Stock sway bars have low torsional spring rates because they are manufactured from small diameter bar stock or tubing. BMR Suspensions SB003 rear sway bar was designed by factoring in the vehicle weight, application, motion ratio, coil spring rate, and adjustability requirements. Manufactured from heavy-wall 25mm DOM tubing, the SB003 is cold formed to better resist torsional fatigue and retain its "memory" far longer than the hot-formed bars used by many competitors. The sway bar is CNC-formed for exact manufacturing tolerances and repeatable high quality. The SB003 attaches to your Camaro with 88-durometer polyurethane bushings, reducing the deflection from the stock rubber bushings. These bushings are molded from 88-durometer, low-deflection, polyurethane, and are internally fluted to keeps grease in the bushing. The fabricated laser cut, TIG-welded steel sway bar end links are reinforced to minimize deflection. BMR Suspension designed the SB003 sway bar for street performance, drag race, autocross, and road race applications. The SB003 gives you a 149% increase in rate over the stock bar (depending on year and model). These rate increases allow you to fine-tune the handling characteristics of the suspension so you can drive harder through corners with minimal body roll. The hollow design allows for loads of strength without adding a lot of weight. This allows for more sway bar control, which equals better handling. When performance is a must, rely on BMR Suspension! BMR Suspensions SB003 sway bars are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.! All kits come with polyurethane mounting bushings and endlink kits.

Product Details

Description:	BMR 82-02 3rd Gen F-Body Rear Hollow 25mm Sway Bar Kit w/ Bushings - Red
Mounting Hardware Included:	Yes
Part Number:	bmrSB003R
Position:	Rear
Quantity:	Sold as a kit
Rear Sway Bar Adjustable:	Fixed
Rear Sway Bar Diameter (in):	1.00 inches
Rear Sway Bar Diameter (mm):	25.0 mm
Rear Sway Bar Type:	Hollow
Sway Bar Finish:	Red powdercoated
Sway Bar Material:	Steel

Part Type

Coil Spring / Tie Rod Sleeve / Stabilizer Bar Kit

Data: v4.2 - Upd: 2026-10-14 02:07:39

Specifications

Product Attributes - Brand: BMR Suspension
Product Attributes - Manufacturer's Part Number: SB003R
Product Attributes - Part Type: Sway Bars
Product Attributes - Product Line: BMR Sway Bars
Product Attributes - UPC: 887753325778
Product Attributes - Sway Bar Position: Rear
Product Attributes - Rear Sway Bar Type: Hollow
Product Attributes - Rear Sway Bar Adjustable: Fixed
Product Attributes - Rear Sway Bar Diameter (in.): 0.984 in.
Product Attributes - Rear Sway Bar Diameter (mm): 25.00 mm
Product Attributes - Mounting Hardware Included: Yes
Product Attributes - Sway Bar Color: Red
Product Attributes - Sway Bar Material: Steel
Product Attributes - Quantity: Sold as a kit.
Product Attributes - Notes: Manufactured from 25mm heavy-wall DOM tubing for increased strength.

Reference Information

Brand Name/s	Bmr Suspension
StreetFX SKU	bmrSB003R
SFX Item ID	4008581
Supplier Item Code	4008581
Manufacturer SKU	SB003R
Manufacturer UPC	887753325778
Alternative References	3rd, 25mm