Increase flow area up to 65% over the stock boost tubes with Banks' huge 3-1/2" boost tubes. Stock consists of a 3" plastic cold side tube and a 2.75" metal hot side tube. Banks boost tubes are both 3-1/2" constant diameter mandrel bent. More air allows for more fuel which means more horsepower. Are you running the new bad-ass Banks Monster-Ram for the 6.7L Cummins? Banks boost tubes are larger than the factory pipe and designed to work with the stock elbow or new Banks Monster-Ram (3.5" or 4") which will improve airflow, and allow the turbocharger to spool up faster. Banks hot and cold side tubes have up to 65% percent greater flow area than stock tubes. Produced from high-quality aluminized steel, the tubes are mandrel bent and constant diameter. This allows for quicker turbo spool. Better flowing intercooler tubes improve retention of boost pressure (increases density) between turbo, intercooler, and intake resulting in maximum horsepower. Our red powder-coat finish stops before the end of the tubes for better grip ensuring our 4- and 5-ply heavy-duty high-temperature silicone couplers hold tight under high-boost conditions. Spring-loaded constant tension clamps maintain a stronger grip to prevent leaks or blown boots. Key Features: Huge increase in size and flow over stock (3.5 vs 2.75"/3 ). Greater cooling capacity. Lower EGTs. Mandrel-bent aluminized steel construction. Constant diameter tubing for the best flow. Perfect fit and finish. 4- and 5-ply heavy-duty silicone couplers. Spring-loaded constant tension clamps. Combine with Banks 3.5" or 4" Monster Ram for maximum power. Works with stock intercooler or aftermarket intercooler with stock inlet and outlet size and location

• Tube Has 2.375 in. Reduction
• Up to 65% greater flow area vs stock. Spools turbo faster with lower EGTs