Afe
aFe POWER Momentum GT Pro Dry S Cold Air Intake 12-17 Jeep Grand Cherokee SRT-8/SRT V8-6.4L HEMI
afe51-76206-1
A$815.07
aFe MACH Force XP Exhausts Cat-Back SS-304 EXH w/ Black Tips 15-16 Ford Mustang EcoBoost 2.3L (t)
aFe MACH Force XP Exhausts Cat-Back SS-304 EXH w/ Black Tips 15-16 Ford Mustang EcoBoost 2.3L (t)
Sale ends in Calculating...
A$3,288.48 A$3,926.36
Last Available from MFR.
LAST ONE AVAILABLE from the manufacturer's distribution centre. Once sold, this item may not be immediately available again. The dispatch timeframe shown is an estimate based on historical orders for this part and is dependent on the manufacturer releasing the final available unit.
We accept
Description
aFe is proud to introduce our Mach Force-Xp cat-back exhaust systems. In recent testing, this system produced +16 horsepower and +17 lbs. x ft. of torque on our in house dyno. This cat-back exhaust system utilizes 3in into 2-1/2in tubing with a clamp-on reduction tube to fit the stock connections. Remove them and combine with the aFe Power Twisted Steel down-pipes (P/N: 48-33017-HC or 48-33017-HN) for added flow and performance. This system incorporates dual, high-flow mufflers to improve performance across the power band while maintaining an aggressive sound. To finish off the exhaust, dual 4 diameter gloss black 304 stainless steel tips are included. This system includes hardware for a hassle-free installation.
Product Overview
The aFe Mach Force XP Exhaust System eliminates the use of the restrictive diesel particulate filter (DPF) for maximum performance and extreme mileage gains. This free flowing exhaust system is constructed out of durable 4" mandrel bent 409 stainless steel and uses bayonet style hangers and band clamps for a clean installation. This system comes complete with all tubing, muffler, bayonet hangers, band clamps, thermocouple and pressure tap bungs and is finished off with a high luster polished 304 stainless steel, rolled, slash cut tip.
You will be shocked at the performance and mileage improvement you will see from this system. This system requires the use of a controller with a DPF-delete function. All aFe exhaust systems are engineered and manufactured in our Corona, California manufacturing facility.
*Features*
* Bayonet Hangers - Swaged bayonet ends lock exhaust components into place for the most secure installation possible. Other manufacturers use less expensive bent hangers that allow tubes and parts to slide from side to side, causing premature wear and damage.
* Welded-on Hangers - Every hanger is thoroughly welded on each side to ensure a stronger connection, compared to other manufacturers who use only inferior floating hangers.
* Band Style Clamps - Premium-quality band clamps are used on critical joints to provide the tightest, leak-free seal possible. Other systems use common, less expensive U-bolt clamps.
* Mandrel Bent - All aFe tubing is 100% mandrel-bent. Mandrel bending ensures the tubing maintains its shape and size, providing smooth, unrestricted airflow. Standard tubing can lose as much as 20% of its diameter in sharp bends.
Features and Benefits
- Produces An Astonishing 16 HP And 17 ft./lbs. Of Torque
- 3 in. To 2.5 in. Mandrel Bent Tubing
- Includes Dual; High-Flow Mufflers
- 2-To-1 Mitered Split To Eliminate Dead Zone For Improved Flow
- Dual 4 in Double Wall Gloss Black 304 Stainless Steel Tips
- 100% Hand Welded For Optimal Strength And Durability
- Includes High Quality Band Clamps For An Improved Seal
- Uses Factory Mounting Locations For Easy Installation
- Made From Mandrel Bent Stainless Steel Tubing For Maximum Flow
- Smooth Bends Allow For Low Increased Horsepower And Torque
- Will NOT Fit Convertible Models
Product Details
| Description: | MACH Force-Xp 3 IN to 2-1/2 IN Stainless Steel Cat-Back Exhaust w/ Black Tip |
|---|---|
| Exhaust Type: | Cat-Back |
| Exit Position: | Dual Rear |
| Exit Style: | Straight |
| Horse Power Increase: | 16 |
| Inlet Size (in.): | 3 |
| Material: | 304 Stainless Steel |
| Outlet Size (in.): | 2.5 |
| Part Number: | afe49-33084-B |
| Sound Level: | Aggressive |
| Tip Cut: | Slant |
| Tip Finish: | Black Powdercoated |
| Tip Included: | Yes |
| Tip Material: | 409 stainless steel |
| Tip Outlet Size: | 5 |
| Tip Size: | 4.0 in. |
| Torque Increase: | 17 |
| Tubing Diameter: | 3 to 2-1/2 |
| WARNING CA Proposition 65 Message: | WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| WARNING CA Proposition 65: | Yes |
Application Summary
Ford Mustang EcoBoost 15-18 I4-2.3L (t)
Part Type
Available to Order
Features
- 100% Hand Welded For Optimal Strength And Durability
- 2-To-1 Mitered Split To Eliminate Dead Zone For Improved Flow
- 3 in. To 2.5 in. Mandrel Bent Tubing
- Dual 4 in Double Wall Gloss Black 304 Stainless Steel Tips
- Includes Dual; High-Flow Mufflers
- Includes High Quality Band Clamps For An Improved Seal
- Made From Mandrel Bent Stainless Steel Tubing For Maximum Flow
- Produces An Astonishing 16 HP And 17 ft./lbs. Of Torque
- Smooth Bends Allow For Low Increased Horsepower And Torque
- Uses Factory Mounting Locations For Easy Installation
- Will NOT Fit Convertible Models
Specifications
- Product Attributes - UPC
- 802959493984
- Product Attributes - Brand
- AFE Power
- Product Attributes - Tip Cut
- Slant
- Product Attributes - Quantity
- Sold as a kit.
- Product Attributes - Part Type
- Exhaust Systems
- Product Attributes - Tip Shape
- Round
- Product Attributes - Tip Finish
- Black powdercoated
- Product Attributes - Exhaust Type
- Single in/Dual out
- Product Attributes - Product Line
- aFe Mach Force XP Exhaust Systems
- Product Attributes - System Style
- Cat-back
- Product Attributes - Tip Included
- Yes
- Product Attributes - Tip Material
- 304 stainless steel
- Product Attributes - Tip Quantity
- 2
- Product Attributes - Exit Location
- Split rear
- Product Attributes - Muffler Style
- Wrapped perforated core
- Product Attributes - System Finish
- Natural
- Product Attributes - Inlet Quantity
- 1
- Product Attributes - Muffler Finish
- Natural
- Product Attributes - Tip Edge Style
- Rolled edge
- Product Attributes - System Material
- 304 stainless steel
- Product Attributes - Muffler Included
- Yes
- Product Attributes - Muffler Material
- 304 stainless steel
- Product Attributes - Muffler Quantity
- Two
- Product Attributes - Hardware Included
- Yes
- Product Attributes - Special Attention
- It is illegal to install parts or components that bypass, defeat, or render inoperative the manufacturers’ technology and design necessary to reduce vehicle emissions to meet state and federal Clean Air Act standards.
- Product Attributes - Muffler Configuration
- Single inlet/Single outlet
- Product Attributes - Tip Outlet Size (in.)
- 4.00
- Product Attributes - Tailpipe Diameter (in.)
- 2.50 in.
- Product Attributes - Manufacturer's Part Number
- 49-33084-B
- Product Attributes - Catalytic Converter(s) Included
- No
- Product Attributes - Intermediate Pipe Diameter (in.)
- 3.00 in.
Reference Information
| Brand Name/s | Afe |
|---|---|
| StreetFX SKU | afe49-33084-B |
| SFX Item ID | 4372546 |
| Supplier Item Code | 4372546 |
| Manufacturer SKU | 49-33084-B |
| Manufacturer UPC | 802959493984 |
| Alternative References | SS-304, 2.3L |
Brochures
Compatibility
Ford Mustang EcoBoost 15-18 I4-2.3L (t)
Loading compatibility information...
Keep shopping
More from Afe
Afe
aFe Takeda Momentum Pro 5R Cold Air Intake System 2018 Honda Accord I4 1.5L (t)
afe56-70002R
A$800.20
Afe
aFe 2019-2020 Hyundai Veloster N L4-2.0L (T) Takeda Turbo Inlet w/ Takeda Intake
afe59-20002
A$332.04
