Afe
aFe POWER Momentum GT Pro Dry S Cold Air Intake 12-17 Jeep Grand Cherokee SRT-8/SRT V8-6.4L HEMI
afe51-76206-1
A$815.07
aFe Scorpion 2-1/2in Aluminized Steel Cat-Back Exhaust 07-18 Jeep Wrangler (JK) V6 3.6L/3.8L (2/4dr)
aFe Scorpion 2-1/2in Aluminized Steel Cat-Back Exhaust 07-18 Jeep Wrangler (JK) V6 3.6L/3.8L (2/4dr)
A$1,603.61
Limited Availability from MFR
Limited stock available from the manufacturer's distribution centre. The dispatch timeframe shown is an estimate based on historical orders of this part. This item is not held in our own warehouse, and availability and release timing may vary depending on manufacturer stock movements and processing at the time of ordering.
We accept
Description
aFe power introduces the Hi-Tuck "Rock Basher" (RB) Scorpion cat-back exhaust system for 2007-2018 Jeep Wrangler (JK) 2 and 4 door models. Constructed of 2-1/2" mandrel-bent aluminized steel tubing, the smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower, torque and throttle response. This exhaust system includes a 14" length, 409 stainless steel, high-flow muffler to absorb high pitch tones producing a powerful sound. All necessary hardware is included for a hassle-free installation. Fits with most aftermarket Evap skid plates. Flow and Performance: Constructed of 2-1/2" mandrel-bent, aluminized steel tubing for maximum flow, performance and value. The smooth transition bends allow for low turbulence, increasing horsepower, torque and improving throttle response. Forward Muffler Location: This Scorpion Hi-Tuck system incorporates a high flow 14" length muffler for an aggressive sound while eliminating exhaust drone. The muffler is located prior to the rear axle for increased climbing angles. And is perfect for adding an on-board air compressor system to the underside of your Jeep. If you are considering an on-board air compressor kit, you need to use this system. Compatible with aFe Power's Glide Guard (Part Number: 46-79001) Hi-Tuck Tip: This exhaust system is finished off with a Hi-Tuck Tip that is developed to give your Jeep extra clearance during extreme angle climbs or descents. Aggressive Sound: A 409 stainless steel performance muffler is designed to provide a deep, throaty, powerful sound on acceleration but maintain a smooth sound at idle. Perfect Fit: An included extension pipe allows this system to fit both the 2 and 4 door Wranglers without modification. OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The Bayonet tip holds the hanger bushing in place for an OE style fit.
Product Overview
aFe power introduces the Hi-Tuck "Rock Basher" (RB) Scorpion cat-back exhaust system for 2007-2018 Jeep Wrangler (JK) 2 and 4 door models. Constructed of 2-1/2" mandrel-bent aluminized steel tubing, the smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower, torque and throttle response. This exhaust system includes a 14" length, 409 stainless steel, high-flow muffler to absorb high pitch tones producing a powerful sound. All necessary hardware is included for a hassle-free installation. Fits with most aftermarket Evap skid plates. Flow and Performance: Constructed of 2-1/2" mandrel-bent, aluminized steel tubing for maximum flow, performance and value. The smooth transition bends allow for low turbulence, increasing horsepower, torque and improving throttle response. Forward Muffler Location: This Scorpion Hi-Tuck system incorporates a high flow 14" length muffler for an aggressive sound while eliminating exhaust drone. The muffler is located prior to the rear axle for increased climbing angles. And is perfect for adding an on-board air compressor system to the underside of your Jeep. If you are considering an on-board air compressor kit, you need to use this system. Compatible with aFe Power's Glide Guard (Part Number: 46-79001) Hi-Tuck Tip: This exhaust system is finished off with a Hi-Tuck Tip that is developed to give your Jeep extra clearance during extreme angle climbs or descents. Aggressive Sound: A 409 stainless steel performance muffler is designed to provide a deep, throaty, powerful sound on acceleration but maintain a smooth sound at idle. Perfect Fit: An included extension pipe allows this system to fit both the 2 and 4 door Wranglers without modification. OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The Bayonet tip holds the hanger bushing in place for an OE style fit.
Features and Benefits
- 2.5 in. Mandrel Bent Aluminized Steel Tubing
- Hi-Tuck Design To Provide Max. Clearance
- 409 Stainless Steel High-Flow Muffler
- Bayonet Styles Hangers And Heavy Duty Band Clamps
- Single Rear Exit System
Product Details
| Clamps Included: | Yes |
|---|---|
| Description: | Scorpion 2-1/2 IN Aluminized Steel Cat-Back Hi-Tuck Exhaust System |
| Exit Style: | Hi-Tuck |
| Finish: | Natural |
| Grade Type: | Performance |
| Hangers Included: | Yes |
| Muffler Body Length: | 18 |
| Part Number: | afe49-08055 |
| Pipe Material: | 409 Stainless Steel |
| Sound Level: | Moderate |
| Tip Shape: | Turn-Down |
| WARNING CA Proposition 65 Message: | WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| WARNING CA Proposition 65: | Yes |
Application Summary
Jeep Wrangler (JK) 07-18 V6-3.8/3.6L
Part Type
Available to Order
Features
- 2.5 in. Mandrel Bent Aluminized Steel Tubing
- 409 Stainless Steel High-Flow Muffler
- Bayonet Styles Hangers And Heavy Duty Band Clamps
- Hi-Tuck Design To Provide Max. Clearance
- Single Rear Exit System
Specifications
- Product Attributes - Brand
- AFE Power
- Product Attributes - Manufacturer's Part Number
- 49-08055
- Product Attributes - Part Type
- Exhaust Systems
- Product Attributes - Product Line
- aFe Scorpion Exhaust Systems
- Product Attributes - UPC
- 802959610244
- Product Attributes - System Material
- Steel
- Product Attributes - System Style
- Cat-back
- Product Attributes - Exhaust Type
- Single
- Product Attributes - Exit Location
- Rear
- Product Attributes - System Finish
- Aluminized
- Product Attributes - Catalytic Converter(s) Included
- No
- Product Attributes - Intermediate Pipe Diameter (in.)
- 2.50 in.
- Product Attributes - Muffler Included
- Yes
- Product Attributes - Muffler Quantity
- One
- Product Attributes - Muffler Configuration
- Single inlet/Single outlet
- Product Attributes - Muffler Style
- Baffled
- Product Attributes - Muffler Material
- 403 stainless steel
- Product Attributes - Muffler Finish
- Natural
- Product Attributes - Hardware Included
- Yes
- Product Attributes - Tailpipe Diameter (in.)
- 2.50 in.
- Product Attributes - Tip Included
- No
- Product Attributes - Remanufactured
- No
- Product Attributes - Quantity
- Sold as a kit.
- Product Attributes - Special Attention
- It is illegal to install parts or components that bypass, defeat, or render inoperative the manufacturers’ technology and design necessary to reduce vehicle emissions to meet state and federal Clean Air Act standards.
Reference Information
| Brand Name/s | Afe |
|---|---|
| StreetFX SKU | afe49-08055 |
| SFX Item ID | 4369929 |
| Supplier Item Code | 4369929 |
| Manufacturer SKU | 49-08055 |
| Manufacturer UPC | 802959610244 |
| Alternative References | 2-1/2in, 3.6L/3.8L, (2/4dr) |
Brochures
Compatibility
Jeep Wrangler (JK) 07-18 V6-3.8/3.6L
Loading compatibility information...
Keep shopping
More from Afe
Afe
aFe Takeda Momentum Pro 5R Cold Air Intake System 2018 Honda Accord I4 1.5L (t)
afe56-70002R
A$800.20
Afe
aFe 2019-2020 Hyundai Veloster N L4-2.0L (T) Takeda Turbo Inlet w/ Takeda Intake
afe59-20002
A$332.04
