Afe
aFe POWER Momentum GT Pro Dry S Cold Air Intake 12-17 Jeep Grand Cherokee SRT-8/SRT V8-6.4L HEMI
afe51-76206-1
A$815.07
aFe POWER Twisted Steel Loop Relocation Pipe 12-18 Jeep Wrangler (JK) V6 3.6L
aFe POWER Twisted Steel Loop Relocation Pipe 12-18 Jeep Wrangler (JK) V6 3.6L
A$605.42
Available from MFR.
This item is available from the manufacturer's distribution centre. The dispatch timeframe shown is an estimate based on historical order processing and release times for this part. This item is not held in our own warehouse, and actual dispatch timing may vary depending on manufacturer workload and logistics at the time of ordering.
We accept
Description
aFe is proud to introduce an all new Twisted Steel Exhaust Loop Relocation Pipe for the 2012-2017 Jeep Wrangler (JK) 2/4-Door with the V6-3.6L engine. This product was designed to accommodate most Long-Arm lift kits without compromising performance. By maintaining equal length between exhaust banks and the Cat-Back system you'll maintain performance and sound, as opposed to the shorter "Loop Replacement" products that negatively impact both. Constructed of mandrel-bent, 2" 409 stainless steel tubing this exhaust loop relocation pipe provides maximum flow and performance. Cutting is required for removal of factory loop. Please review instruction sheet prior to installing. Compatible with aFe Power Y-Pipe - 48-46208 or 48-46207. Accommodates Aftermarket Long-Arm Lift Kits: If you are going to lift your Jeep with an aftermarket Long-Arm lift kit then this product is required. The factory loop tube on the driver's side comes into contact with most aftermarket Long-Arm lift kits. Mandrel-Bent Tubing: Mandrel-bent tubing allows for smooth transitions of exhaust gas increasing exhaust velocity, increasing horsepower, torque and improving throttle response. Leak-Free Seal: High quality 3/8" thick flange is used for a complete 360 degree sealing surface.
Product Overview
aFe is proud to introduce an all new Twisted Steel Exhaust Loop Relocation Pipe for the 2012-2017 Jeep Wrangler (JK) 2/4-Door with the V6-3.6L engine. This product was designed to accommodate most Long-Arm lift kits without compromising performance. By maintaining equal length between exhaust banks and the Cat-Back system you'll maintain performance and sound, as opposed to the shorter "Loop Replacement" products that negatively impact both. Constructed of mandrel-bent, 2" 409 stainless steel tubing this exhaust loop relocation pipe provides maximum flow and performance. Cutting is required for removal of factory loop. Please review instruction sheet prior to installing. Compatible with aFe Power Y-Pipe - 48-46208 or 48-46207. Accommodates Aftermarket Long-Arm Lift Kits: If you are going to lift your Jeep with an aftermarket Long-Arm lift kit then this product is required. The factory loop tube on the driver's side comes into contact with most aftermarket Long-Arm lift kits. Mandrel-Bent Tubing: Mandrel-bent tubing allows for smooth transitions of exhaust gas increasing exhaust velocity, increasing horsepower, torque and improving throttle response. Leak-Free Seal: High quality 3/8" thick flange is used for a complete 360 degree sealing surface.
Features and Benefits
- Accommodates Most Long-Arm Lift Kits
- Maintains Equal Balance
- Will Not Compromise Performance Gains or Exhaust Sound
- 3/8 in. Thick Laser-Cut Flange
- Mandrel Bent 409 Stainless Steel Tubing
- 100% Hand MIG-Welded Construction
- Cutting Is Required To Remove Factory Loop
Product Details
| Description: | Twisted Steel Loop Relocation Pipe |
|---|---|
| Part Number: | afe48-48021 |
| WARNING CA Proposition 65 Message: | WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| WARNING CA Proposition 65: | Yes |
Application Summary
Jeep Wrangler (JK) 12-18 V6-3.6L
Part Type
Available to Order
Features
- 100% Hand MIG-Welded Construction
- 3/8 in. Thick Laser-Cut Flange
- Accommodates Most Long-Arm Lift Kits
- Cutting Is Required To Remove Factory Loop
- Maintains Equal Balance
- Mandrel Bent 409 Stainless Steel Tubing
- Will Not Compromise Performance Gains or Exhaust Sound
Specifications
- Product Attributes - UPC
- 802959481431
- Product Attributes - Brand
- AFE Power
- Product Attributes - Quantity
- Sold individually.
- Product Attributes - Part Type
- Exhaust Pipes, Intermediate Pipes
- Product Attributes - Mandrel-Bent
- Yes
- Product Attributes - Product Line
- aFe Twisted Steel Loop Relocation Pipes
- Product Attributes - Tubing Finish
- Natural
- Product Attributes - Tubing Material
- 409 stainless steel
- Product Attributes - Gaskets Included
- No
- Product Attributes - Hardware Included
- Yes
- Product Attributes - Outside Diameter (in.)
- 2.000 in.
- Product Attributes - Manufacturer's Part Number
- 48-48021
- Product Attributes - Catalytic Converter Included
- No
Reference Information
| Brand Name/s | Afe |
|---|---|
| StreetFX SKU | afe48-48021 |
| SFX Item ID | 4370173 |
| Supplier Item Code | 4370173 |
| Manufacturer SKU | 48-48021 |
| Manufacturer UPC | 802959481431 |
| Alternative References | 3.6L |
Brochures
Compatibility
Jeep Wrangler (JK) 12-18 V6-3.6L
Loading compatibility information...
Keep shopping
More from Afe
Afe
aFe Takeda Momentum Pro 5R Cold Air Intake System 2018 Honda Accord I4 1.5L (t)
afe56-70002R
A$800.20
Afe
aFe 2019-2020 Hyundai Veloster N L4-2.0L (T) Takeda Turbo Inlet w/ Takeda Intake
afe59-20002
A$332.04
