Afe
aFe POWER Momentum GT Pro Dry S Cold Air Intake 12-17 Jeep Grand Cherokee SRT-8/SRT V8-6.4L HEMI
afe51-76206-1
A$815.07
aFe MACH Force XP 3in 409-SS Exhaust Cat-Back 2017 Ford F-150 Raptor V6-3.5L (tt) w/ Black Tip
aFe MACH Force XP 3in 409-SS Exhaust Cat-Back 2017 Ford F-150 Raptor V6-3.5L (tt) w/ Black Tip
A$3,611.18
Last Available from MFR.
LAST ONE AVAILABLE from the manufacturer's distribution centre. Once sold, this item may not be immediately available again. The dispatch timeframe shown is an estimate based on historical orders for this part and is dependent on the manufacturer releasing the final available unit.
We accept
Description
aFe is proud to introduce the MACH Force-Xp Cat-Back exhaust system. This exhaust system outflows the factory exhaust. This cat-back exhaust is constructed of 3" mandrel-bent 409 stainless steel tubing and comes complete with free-flowing muffler, OE-style bayonet hangers, band clamps and necessary hardware for a hassle-free installation. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower and torque. The system is finished off with dual gloss black 304 stainless steel, single wall slash cut tips for an aggressive style. Installation is a Snap: This MACH Force-Xp exhaust system use all factory mounting locations providing stability and a hassle-free installation. Leak-Free Seal: High quality band clamps are used for a complete 360-degree sealing surface eliminating leak paths. Aggressive Sound: A free-flowing stainless steel muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. Perfect Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The Bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.
Product Overview
The aFe Mach Force XP Exhaust System eliminates the use of the restrictive diesel particulate filter (DPF) for maximum performance and extreme mileage gains. This free flowing exhaust system is constructed out of durable 4" mandrel bent 409 stainless steel and uses bayonet style hangers and band clamps for a clean installation. This system comes complete with all tubing, muffler, bayonet hangers, band clamps, thermocouple and pressure tap bungs and is finished off with a high luster polished 304 stainless steel, rolled, slash cut tip.
You will be shocked at the performance and mileage improvement you will see from this system. This system requires the use of a controller with a DPF-delete function. All aFe exhaust systems are engineered and manufactured in our Corona, California manufacturing facility.
*Features*
* Bayonet Hangers - Swaged bayonet ends lock exhaust components into place for the most secure installation possible. Other manufacturers use less expensive bent hangers that allow tubes and parts to slide from side to side, causing premature wear and damage.
* Welded-on Hangers - Every hanger is thoroughly welded on each side to ensure a stronger connection, compared to other manufacturers who use only inferior floating hangers.
* Band Style Clamps - Premium-quality band clamps are used on critical joints to provide the tightest, leak-free seal possible. Other systems use common, less expensive U-bolt clamps.
* Mandrel Bent - All aFe tubing is 100% mandrel-bent. Mandrel bending ensures the tubing maintains its shape and size, providing smooth, unrestricted airflow. Standard tubing can lose as much as 20% of its diameter in sharp bends.
Features and Benefits
- Mandrel Bent Stainless Steel Tubing
- Free Flowing Muffler
- Smooth Curves
- Hassle Free Installation
- High Quality Band Clamps For Leak-Free Seal
- Aggressive Sound
Product Details
| Clamp Count: | 2 |
|---|---|
| Clamp Type: | Band |
| Clamps Included: | 2 |
| Description: | MACH Force-Xp 3 IN 409 Stainless Steel Cat-Back Exhaust System w/Black Tip |
| Exhaust Pipe Material: | Stainless Steel |
| Exhaust Type: | Cat-Back |
| Exit Location: | Split Rear |
| Exit Position: | Rear |
| Exit Quantity: | Dual |
| Exit Style: | Straight |
| Finish: | Stainless Steel |
| Hanger Included: | Yes |
| Horse Power Increase: | 9 |
| Inlet Size (in.): | 3 |
| Main Piping Diameter (in.): | 3 |
| Material: | Stainless Steel |
| Muffler Count: | 1 |
| Muffler Included: | Yes |
| Muffler Material: | 409 Stainless Steel |
| Outlet Size (in.): | 3 |
| Part Number: | afe49-43045-B |
| Pipe Material: | Stainless Steel |
| System Finish: | Natural |
| System Material: | 409 Stainless Steel |
| System Type: | Cat Back |
| Tail Pipe Quantity: | 2 |
| Tip Cut: | Slant |
| Tip Diameter (in.): | 4 |
| Tip Edge Style: | Rolled edge |
| Tip Finish: | Black Powdercoated |
| Tip Included: | Yes |
| Tip Material: | 409 stainless steel |
| Tip Outlet Size: | 4.5 |
| Tip Quantity: | Dual |
| Tip Size: | 4.0 in. |
| Torque Increase: | 9 |
| Tubing Diameter: | 3 |
| WARNING CA Proposition 65 Message: | WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| WARNING CA Proposition 65: | Yes |
Application Summary
Ford F-150 Raptor 17-18 V6-3.5L (tt)
Part Type
Available to Order
Features
- Aggressive Sound
- Free Flowing Muffler
- Hassle Free Installation
- High Quality Band Clamps For Leak-Free Seal
- Mandrel Bent Stainless Steel Tubing
- Smooth Curves
Specifications
- Product Attributes - UPC
- 802959600832
- Product Attributes - Brand
- AFE Power
- Product Attributes - Tip Cut
- Slant
- Product Attributes - Quantity
- Sold as a kit.
- Product Attributes - Part Type
- Exhaust Systems
- Product Attributes - Tip Shape
- Round
- Product Attributes - Tip Finish
- Black
- Product Attributes - Exhaust Type
- Dual
- Product Attributes - Product Line
- aFe Mach Force XP Exhaust Systems
- Product Attributes - System Style
- Cat-back
- Product Attributes - Tip Included
- Yes
- Product Attributes - Tip Material
- 409 stainless steel
- Product Attributes - Tip Quantity
- 2
- Product Attributes - Exit Location
- Split rear
- Product Attributes - Muffler Style
- Wrapped perforated core
- Product Attributes - System Finish
- Natural
- Product Attributes - Inlet Quantity
- 2
- Product Attributes - Muffler Finish
- Natural
- Product Attributes - Tip Edge Style
- Rolled edge, single-wall
- Product Attributes - System Material
- 409 stainless steel
- Product Attributes - Muffler Included
- Yes
- Product Attributes - Muffler Material
- 409 stainless steel
- Product Attributes - Muffler Quantity
- One
- Product Attributes - Hardware Included
- Yes
- Product Attributes - Special Attention
- It is illegal to install parts or components that bypass, defeat, or render inoperative the manufacturers’ technology and design necessary to reduce vehicle emissions to meet state and federal Clean Air Act standards.
- Product Attributes - Muffler Configuration
- Dual inlet/Dual outlet
- Product Attributes - Tip Outlet Size (in.)
- 4.50
- Product Attributes - Tailpipe Diameter (in.)
- 3.00 in.
- Product Attributes - Manufacturer's Part Number
- 49-43045-B
- Product Attributes - Catalytic Converter(s) Included
- No
- Product Attributes - Intermediate Pipe Diameter (in.)
- 3.00 in.
Reference Information
| Brand Name/s | Afe |
|---|---|
| StreetFX SKU | afe49-43045-B |
| SFX Item ID | 4369625 |
| Supplier Item Code | 4369625 |
| Manufacturer SKU | 49-43045-B |
| Manufacturer UPC | 802959600832 |
| Alternative References | 3in, 409-SS, F-150, V6-3.5L |
Brochures
Compatibility
Ford F-150 Raptor 17-18 V6-3.5L (tt)
Loading compatibility information...
Keep shopping
More from Afe
Afe
aFe Takeda Momentum Pro 5R Cold Air Intake System 2018 Honda Accord I4 1.5L (t)
afe56-70002R
A$800.20
Afe
aFe 2019-2020 Hyundai Veloster N L4-2.0L (T) Takeda Turbo Inlet w/ Takeda Intake
afe59-20002
A$332.04
