Injen 15-20 Ford F-150 2.7L/3.5L EcoBoost Bar and Plate Front Mount Intercooler
Injen 15-20 Ford F-150 2.7L/3.5L EcoBoost Bar and Plate Front Mount Intercooler
A$1,347.72
IN STOCK! Est Ship 3-5 days.
This item is IN STOCK at one of our warehouses or distribution centres, the ETA is the approximate time required to prepare your order for dispatch.
We accept
Description
The all-new Ford F-150 EcoBoost is a great platform for soaking up highway miles during the weekday and tearing it up in the desert on the weekend! With some minor modifications, the Twin Turbo engine is capable of producing some gnarly power. But, the added power of some tuning and bolt-ons will push the limits of the stock charged air system, necessitating an upgrade for the stock tube-and-fin intercooler, which is prone to heat soak. Thankfully Injen has developed a highly efficient bar-and-plate intercooler engineered specifically to fit the Ford F-150. The FM9102i intercooler is a direct-fit unit and features a 25% increase in core volume while requiring no modification to your truck. This intercooler is constructed with cast end tanks and precision CNC-machined aluminum fittings for use with the factory intercooler piping. The Injen Ford F-150 EcoBoost intercooler reduces intake temperatures by 30°F and provides an increase of up to 29 HP and 33 Ft. Lbs. of torque while retaining factory boost pressure across the core. This F-150 EcoBoost twin turbo intercooler has been meticulously TIG-welded by hand and has a sick Raw finish. With about a one-hour installation, great power, temperature benefits, and a Lifetime Warranty, the Injen FM9102i intercooler is a must-do upgrade for any stock or modified Ford F-150 EcoBoost.
Product Overview
The all-new Ford F-150 EcoBoost and F-150 Raptor Ecoboost are both great platforms for soaking up highway miles during the weekday and tearing it up in the desert on the weekend! With some minor modifications, the Twin Turbo engine is capable of producing some gnarly power. That added power after some tuning and bolt-ons will push the limits of the stock charged air system necessitating an upgrade over the inefficient stock tube-and-fin intercooler. Thankfully Injen has developed a highly efficient bar-and-plate intercooler engineered specifically to fit the Ford F-150. The FM9102i intercooler is a direct-fit unit and features a 25% increase in core volume while requiring no modification to your truck. This intercooler is constructed with cast end tanks and precision CNC-machined aluminum fittings for use with the factory intercooler piping. The Injen Ford F-150 EcoBoost intercooler reduces intake temperatures by 30?F and provides an increase of up to 29 HP and 33 Ft. Lbs. of torque while retaining factory boost pressure across the core. This F-150 EcoBoost twin turbo intercooler has been meticulously TIG-welded by hand and has a sick finish that is reminiscent of brushed aluminum. With about a one-hour installation, great power, temperature benefits, and a Lifetime Warranty, the Injen FM9102i intercooler is a must-do upgrade for any stock or modified Ford F-150 EcoBoost.
Features and Benefits
- All Factory Mounting Locations
- Dyno Proven gains of up to 29 hp and 33 lb-ft. of torque
- Outlet temperature up to 30? lower than stock intercooler
- TIG-welded Aluminum Bar-Plate
- Stock Pressure Drop Retained within 0.5 psi
- Designed to work with stock calibration
- Increases throttle response and decreases turbo lag
- Uses all factory mounting locations
- Includes all necessary hardware for a hassle-free installation
- Made in Pomona, California USA
- Injen Technology Limited Lifetime Warranty
- Note: This product is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.
Product Details
| Compatible Throttle Controller: | PT0013B |
|---|---|
| Description: | Intercooler Kit |
| Part Number: | injFM9102I |
| Prop 65 (C, R or CR): | CR |
| Prop 65 - Short Label: | prop65_warning.jpg |
| Prop 65 Yes/No: | Yes |
| Title: | Injen Front Mount Intercooler |
| WARNING CA Proposition 65 Message: | This product can expose you to chemicals including (Antimony [Oxide]; Arsenic; Beryllium. Chromium (hexavalent); Cobalt Cadmium; Lead; and Nickel which is known to the State of California to cause birth defects or other reproductive harm. |
| WARNING CA Proposition 65: | Yes |
Features
- All Factory Mounting Locations
- Designed to work with stock calibration
- Dyno Proven gains of up to 29 hp and 33 lb-ft. of torque
- Includes all necessary hardware for a hassle-free installation
- Increases throttle response and decreases turbo lag
- Injen Technology Limited Lifetime Warranty
- Made in Pomona, California USA
- Note: This product is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.
- Outlet temperature up to 30? lower than stock intercooler
- Stock Pressure Drop Retained within 0.5 psi
- TIG-welded Aluminum Bar-Plate
- Uses all factory mounting locations
Specifications
- Compatible Throttle Controller:
- PT0013B
- Description:
- Intercooler Kit
- Part Number:
- injFM9102I
- Prop 65 (C, R or CR):
- CR
- Prop 65 - Short Label:
- prop65_warning.jpg
- Prop 65 Yes/No:
- Yes
- Title:
- Injen Front Mount Intercooler
- WARNING CA Proposition 65 Message:
- This product can expose you to chemicals including (Antimony [Oxide]; Arsenic; Beryllium. Chromium (hexavalent); Cobalt Cadmium; Lead; and Nickel which is known to the State of California to cause birth defects or other reproductive harm.
- WARNING CA Proposition 65:
- Yes
Reference Information
| Brand Name/s | Injen |
|---|---|
| StreetFX SKU | injFM9102I |
| SFX Item ID | 4242760 |
| Supplier Item Code | 4242760 |
| Manufacturer SKU | FM9102I |
| Manufacturer UPC | 843115023027 |
| Alternative References | F-150, 2.7L/3.5L |
Brochures
Compatibility
Loading compatibility information...
Keep shopping
More from Injen
