Injen 15-18 VW Golf 1.8T / 15-19 VW GTI 2.0T TSI Evolution Intake
Injen 15-18 VW Golf 1.8T / 15-19 VW GTI 2.0T TSI Evolution Intake
A$950.25
IN STOCK! Est Ship 3-5 days.
This item is IN STOCK at one of our warehouses or distribution centres, the ETA is the approximate time required to prepare your order for dispatch.
We accept
Description
The EVO3003 Cold Air Intake system features our 2-piece box design that incorporates our boost plenum, our fully integrated ram air scoop with functioning dual inlets, and a massive 360 degree SuperNano-Web dry air filter. Every Injen Evolution air induction system utilizes Injen's proprietary SuperNano-Web dry air filters. Don't just take our word for it, every intake system that Injen Technology produces is dyno tested in-house and those results are published for anyone to see.
Product Overview
Give your MK7 Audi/Volkswagen that added punch you crave with the EVO3003 Evolution Cold Air Intake System by Injen Technology. The EVO3003 is specifically engineered for the Audi/Volkswagen MK7 with the 1.8L/2.0L engine and features a fully integrated and functional front ram air system with dual inlets. Unlike the factory scoop that some "performance" companies retain, the Injen EVO3003 has a redesigned ram air section that utilizes booth inlets for maximum airflow. Every EVO3003 cold air intake is made in the USA from cross linked high density polyethylene for extreme durability. No cutting or drilling required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS right out of the box!
Features and Benefits
- Stainless Steel Hardware/Clamps And Screws
- Does not fit on vehicles equipped with a MAF sensor
- Dyno Proven gains of up to 19 hp and 24 lb-ft. of torque
- Designed to work with the stock calibration
- Aggressive intake growl under acceleration
- Durable Roto-Molded XLPE Polyethylene housing and intake tube
- Intake scoop is designed to capture the largest amount of cool air
- Reinforced automotive grade silicone couplers
- Fully serviceable Injen SuperNano-Web dry air filter
- Replacement air filter part number X-1128-BB
- Stainless steel band clamps with inner protective liner
- Aggressive underHood appearance while maintaining an OE fit
- Made in Pomona, California USA
- Injen Technology Limited Lifetime Warranty
- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Product Details
| Black Hydroshield (Optional): | N/A |
|---|---|
| Compatible Throttle Controller: | PT0009B |
| Description: | Evolution Series Air Induction System |
| Filter Color: | Blue |
| Filter Media: | SuperNano-Web Dry |
| Grade Type: | Performance |
| HP Gain: | 19 |
| Heat Shield Included: | No |
| Intake Color: | Black |
| Mounting Hardware Included: | Yes |
| Part Number: | injEVO3003 |
| Prop 65 (C, R or CR): | CR |
| Prop 65 - Short Label: | prop65_warning.jpg |
| Prop 65 Yes/No: | Yes |
| Red Hydroshield (Optional): | N/A |
| Replacement Filter Part Number: | X-1128-BB |
| TQ Gain: | 24 |
| Title: | Injen EVOLUTION Cold Air Intake System |
| Tube Material: | Rotomolded XLPE |
| Universal or Specific Fit: | Specific |
| WARNING CA Proposition 65 Message: | This product can expose you to chemicals including Chromium; Nickel; Carbon Black and Cobalt; which are known to the State of California to cause cancer. |
| WARNING CA Proposition 65: | Yes |
Part Type
Engine Cold Air Intake
Features
- Aggressive intake growl under acceleration
- Aggressive underHood appearance while maintaining an OE fit
- Designed to work with the stock calibration
- Durable Roto-Molded XLPE Polyethylene housing and intake tube
- Dyno Proven gains of up to 19 hp and 24 lb-ft. of torque
- Fully serviceable Injen SuperNano-Web dry air filter
- Injen Technology Limited Lifetime Warranty
- Intake scoop is designed to capture the largest amount of cool air
- Made in Pomona, California USA
- Reinforced automotive grade silicone couplers
- Replacement air filter part number X-1128-BB
- Stainless steel band clamps with inner protective liner
- Stainless Steel Hardware/Clamps And Screws
- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Specifications
- Product Attributes - UPC
- 843115027766
- Product Attributes - Brand
- Injen
- Product Attributes - Notes
- For vehicles with turbo and secondary air injection systems.
- Product Attributes - Quantity
- Sold as a kit.
- Product Attributes - Part Type
- Air Intake Kits
- Product Attributes - Tube Color
- Black
- Product Attributes - Filter Color
- Blue
- Product Attributes - Product Line
- Injen Evolution Series Cold Air Intake Kits
- Product Attributes - Sleeve Color
- Black
- Product Attributes - Tube Material
- Polyethylene
- Product Attributes - Air Filter Type
- Dry
- Product Attributes - Tube Diameter (in.)
- 3.500 in.
- Product Attributes - Filter End Cap Color
- Black
- Product Attributes - Air Intake Filter Material
- Synthetic
- Product Attributes - Manufacturer's Part Number
- EVO3003
Reference Information
| Brand Name/s | Injen |
|---|---|
| StreetFX SKU | injEVO3003 |
| SFX Item ID | 4243496 |
| Supplier Item Code | 4243496 |
| Manufacturer SKU | EVO3003 |
| Manufacturer UPC | 843115027766 |
| Alternative References | 1.8T, 2.0T |
Brochures
Compatibility
| Application Data |
|
|---|
Loading compatibility information...
Keep shopping
More from Injen
Injen
Injen 15-18 VW Golf / GTI MKVII 2.0L Turbo TSI Black Short Ram Intake with MR Tech and Heat Shield
injSP3078BLK
A$622.25