Aeromotive A1000 Brushless External Fuel Pump
Aeromotive A1000 Brushless External Fuel Pump
Sale ends in Calculating...
A$1,408.87
A$1,591.22
Available from MFR.
This item is available from the manufacturer's distribution centre. The dispatch timeframe shown is an estimate based on historical order processing and release times for this part. This item is not held in our own warehouse, and actual dispatch timing may vary depending on manufacturer workload and logistics at the time of ordering.
We accept
Description
Fuel injected engines: up to 1300 FWHP naturally aspirated and up to 1000 FWHP forced air induction. Carbureted engines: up to 1500 FWHP naturally aspirated and up to 1200 FWHP forced air induction. E85 compatible. Lighter and quieter than the traditional A1000 pump. Reduced current draw at higher pressures. Extended service life in methanol and ethanol. Integral, external brushless controller for clean installation, cooler fuel, and enhanced reliability. ORB-10 inlet and outlet ports. Requires straight 12-VDC to 16-VDC power supply. EFI rated flow of 700 lbs/hr at 45 psi and 13.5 volts. Carb rated flow of 900 lbs/hr at 9 psi and 13.5 volts. The same A1000 Fuel Pump the world has come to trust and depend on is now available with the latest brushless-motor technology. Built for up to 65 psi of sustained pressure, featuring our bedrock solid roller vane design that primes easily, reduces friction and improves efficiency. Brushless motors employ sensors to monitor rotor angle to provide faster and more reliable phase shifting, producing more torque capacity and motor efficiency. Instead of the armature rotating, in a brushless motor the magnets rotate around the armature and the motor controller manages the phase shift to keep the motor rotating under load (load is related to pressure in a fuel pump).? With more torque per watt and a higher torque to weight ratio, brushless motors produce lower noise and deliver higher reliability. With a higher level of efficiency, down to fractions of a second in design speed control, the new Aeromotive brushless fuel pumps provide precise control of fuel pump RPM as pressure rises, better maintaining pump RPM and flow, producing a flatter flow curve.? Tight tolerances result in less current draw, less heat and extended life. Now there is the ability to upgrade to a premium brushless pump for faster, more reliable and uninterrupted fuel delivery with less power consumption and potential for wear or failure.
Additional Information
Brushless Motor/Spur Gear Design
Part Type
Fuel Pump
Features
- Carbureted Engines: E85 up to 1050 FWHP – naturally aspirated up to 840 FWHP – forced air induction
- Carbureted Engines: GAS up to 1500 FWHP – naturally aspirated up to 1200 FWHP – forced air induction
- EFI rated flow of 700 lbs./hr. @ 45 psi, 13.5 volts Carb rated flow of 900 lbs./hr. @ 9 psi, 13.5 volts
- Extended service life in methanol and ethanol.
- Fuel Injected Engines: E85 up to 910 FWHP – naturally aspirated up to 700 FWHP – forced air induction
- Fuel Injected Engines: GAS up to 1300 FWHP – naturally aspirated up to 1000 FWHP – forced air induction
- Includes 2 ea. P/N 12703 stainless steel t-bolt clamps for mounting.
- Integral, external brushless controller for clean installation, cooler fuel and enhanced reliability.
- Lighter than the traditional A1000 pump.
- Not compatible with pulse modulated systems or fuel pump speed controllers.
- ORB-10 inlet and outlet ports.
- Quieter than the traditional A1000 pump.
- Reduced current draw at higher, EFI pressures.
- Requires straight 12-VDC to 16-VDC power supply.
Specifications
- Product Attributes - Brand
- Aeromotive
- Product Attributes - Manufacturer's Part Number
- 11124
- Product Attributes - Part Type
- Fuel Pumps
- Product Attributes - Product Line
- Aeromotive A1000 Brushless In-Line Fuel Pumps
- Product Attributes - UPC
- 00684980008784
- Product Attributes - Fuel Pump Type
- Electric external
- Product Attributes - Flow Rate
- 105 gph/397 lph
- Product Attributes - Fuel Pressure (psi)
- 90 psi
- Product Attributes - Fuel Pump Voltage
- 12 V
- Product Attributes - Fuel Pressure Regulator Included
- No
- Product Attributes - Sending Unit Included
- No
- Product Attributes - Fuel Pump Inlet Size
- -10 AN
- Product Attributes - Inlet Quantity
- 1
- Product Attributes - Inlet Attachment
- Female straight cut O-ring
- Product Attributes - Fuel Pump Outlet Size
- -10 AN
- Product Attributes - Outlet Quantity
- 1
- Product Attributes - Outlet Attachment
- Female straight cut O-ring
- Product Attributes - Gasket Included
- No
- Product Attributes - Wiring Harness Included
- No
- Product Attributes - Mounting Bracket Included
- No
- Product Attributes - Mounting Hardware Included
- No
- Product Attributes - Pulley Included
- No
- Product Attributes - Remanufactured
- No
- Product Attributes - Quantity
- Sold individually.
- Product Attributes - Notes
- EFI flow rate is 700 lbs./hr. @ 45 psi, 13.5 V. Carburetor flow rate is 900 lbs./hr. @ 9 psi, 13.5 V. Not compatible with pulse modulated systems or fuel pump speed controllers.
Reference Information
| Brand Name/s | Aeromotive |
|---|---|
| StreetFX SKU | aer11124 |
| SFX Item ID | 4494971 |
| Supplier Item Code | 4494971 |
| Manufacturer SKU | 11124 |
| Manufacturer UPC | 684980008784 |
| Alternative References | AEI-11124, AFS11124, A1000 |
Brochures
Compatibility
| Application Data |
|
|---|
Loading compatibility information...
Keep shopping
More from Aeromotive
Aeromotive
Aeromotive Fuel Pump - Universal - Phantom Dual 340 - 6-10in Depth
aer18309
A$1,980.98
A$2,002.13
Aeromotive
Aeromotive SS Series Billet (14 PSI) Carbureted Fuel Pump - 3/8in NPT Ports
aer11203
A$648.60
A$760.30