Mishimoto 24+ Tacoma Performance Intercooler Kit - BK Cooler - BK Pipes
Mishimoto 24+ Tacoma Performance Intercooler Kit - BK Cooler - BK Pipes
A$2,751.56
Available from MFR.
This item is available from the manufacturer's distribution centre. The dispatch timeframe shown is an estimate based on historical order processing and release times for this part. This item is not held in our own warehouse, and actual dispatch timing may vary depending on manufacturer workload and logistics at the time of ordering.
We accept
Description
The 2024+ Tacoma's T24A-FTS builds heat soak under repeated load - the factory tube-and-fin intercooler loses cooling capacity across consecutive WOT runs, towing grades, and sustained trail use. The Mishimoto Intercooler and Charge Pipe Kit addresses the full charge air system in one purchase: a 55% larger bar-and-plate core paired with aluminum charge piping, DuraCore™ couplers, and constant-tension clamps, matched from intercooler to throttle body.--The bar-and-plate core cuts intake air temps by up to 36°F at wide-open throttle and delivers 30% lower pressure drop than stock, reducing turbocharger strain and maintaining boost efficiency under load. An included custom shroud directs full airflow to every row of the oversized core - no trimming required. Cast end tanks, billet aluminum ORB ports, updated mounting bushings, and an included crush washer complete the hardware package for a sealed, long-term install.--The system preserves Toyota's adaptive cruise control with no sensor relocation. Fits the 2024+ Toyota Tacoma (T24A-FTS, N400) and 2024+ Toyota Land Cruiser LC250. Available in Silver or Stealth Black intercooler finish with matching Wrinkle Black or Wrinkle Red charge pipes. Compatible with OEM and Mishimoto components for future cooling system expansion. Backed by the Mishimoto Lifetime Warranty.
Product Overview
Unlock the full potential of your 2024+ Toyota Tacoma with the Mishimoto Intercooler and Charge Pipes Kit. This system is engineered not just to make power, but to save it when it matters most. Precision-designed to fit within the tight Tacoma engine bay, it maximizes airflow and cooling while reducing strain on your turbo. Whether you're climbing trails, hauling loads, or charging down the highway, this kit keeps intake temps low and reliability high.
--
The heart of the system is a 55% larger bar-and-plate intercooler core that delivers a 36°F reduction in intake temperatures during wide-open-throttle pulls. The result is more consistent power in the low RPM range and stronger charge air cooling at higher speeds. Reduced pressure drop means your turbo works less to do more, preserving performance and extending component life. Cast end tanks, billet aluminum ports, and updated mounting bushings give this kit the durability to keep you moving, not stuck on the shoulder.
--
Choose from red or black wrinkle powder-coated charge pipes, along with a sleek silver or stealth black intercooler finish, to give your engine bay a look that matches its performance. Like all Mishimoto products, it’s backed by the Mishimoto Lifetime Warranty so you can drive harder with confidence.
Product Details
| Description: | Mishimoto 24+ Tacoma Performance Intercooler Kit - BK Cooler - BK Pipes |
|---|---|
| Install Difficulty: | 4 |
| OptionLabel: | Black Intercooler, Black Pipes |
| Part Number: | misMMINT-TAC-24KBKBK |
| SellingPoint01: | Direct fit for the 2024+ Toyota Tacoma |
| SellingPoint02: | Bar-and-plate core with a 55% increase in volume for improved heat dissipation and cooling efficiency |
| SellingPoint03: | Achieves a 36°F reduction in intake temperatures during wide-open throttle |
| SellingPoint04: | Delivers a 30% lower pressure drop compared to stock, reducing stress on the turbocharger and helping maintain consistent responsive power across the RPM range |
| SellingPoint05: | Robust bar-and-plate core offers even flow from top to bottom |
| SellingPoint06: | Includes new mounting bushings and a crush washer for the factory temperature sensor for a secure and leak-free install |
| SellingPoint07: | Carefully designed to avoid interference with the Tacoma adaptive cruise control system to preserve full functionality of factory safety features |
| SellingPoint08: | Compatible with both stock and Mishimoto charge pipes for flexible upgrade paths |
| SellingPoint09: | Available in a sleek silver or stealth black powder-coated finish |
| SellingPoint10: | Mishimoto Lifetime Warranty |
| SellingPoint11: | N/A |
| SellingPoint12: | N/A |
| SellingPoint13: | N/A |
| SellingPoint14: | N/A |
| SellingPoint15: | N/A |
| TechSpec Applications: | Toyota Tacoma 2.4L L4 2024+ |
| TechSpec Centerline Radius: | 3.94 (Hot-Side) 4.72 (Cold-Side) |
| TechSpec Chassis Codes: | N400 |
| TechSpec Core Height (in): | 8.9 |
| TechSpec Core Length (in): | 24.1 |
| TechSpec Core Thickness (in): | 3.5 |
| TechSpec Core Type: | Bar-And-Plate |
| TechSpec Engine Codes: | T24A-FTS |
| TechSpec Includes: | (1) Performance Intercooler--(2) Vacuum Fittings--(1) Intercooler Duct--(1) Intercooler Duct Bracket--(2) Hot-Side Intercooler Pipes--(2) Cold-Side Intercooler Pipes--(2) Silicone Couplers--(1) Bill Of Materials Notecard--Mishimoto Lifetime Warranty |
| TechSpec Inlet (in): | 2.0 |
| TechSpec Installation Notes: | N/A |
| TechSpec Maximum Recommended Boost Pressure (PSI): | 50 |
| TechSpec Maximum Recommended Horsepower: | 650 |
| TechSpec Note: | N/A |
| TechSpec Outlet (in): | 2.25 |
| TechSpec Overall Height (in): | N/A |
| TechSpec Overall Length (in): | N/A |
| TechSpec Overall Width (in): | N/A |
| TechSpec Pipe Diameter: | 2.5" (Hot-Side) 3" (Cold-Side) |
| TechSpec Pipe Length: | 16.34 (Hot-Side) 18.90 (Cold-Side) |
| TechSpec Pipe Shape: | Round |
| TechSpec Weight (lbs): | 33.5 |
Part Type
Intercooler Kit
Features
- Cuts charge air temps by up to 36°F at wide-open throttle — a 55% larger bar-and-plate core provides the heat-sink capacity the factory tube-and-fin unit loses under repeated WOT pulls, towing grades, and sustained off-road operation.
- Included custom shroud ensures full airflow reaches every row of the oversized core — no trimming, no gaps, and no performance loss from an undirected core face that would otherwise undercut the 55% volume increase.
- Reduces turbocharger stress with 30% lower pressure drop than OEM — optimized airflow through the 3.50-in thick core maintains boost pressure and consistent power across the RPM range under sustained demand.
Specifications
- Description:
- Mishimoto 24+ Tacoma Performance Intercooler Kit - BK Cooler - BK Pipes
- Install Difficulty:
- 4
- OptionLabel:
- Black Intercooler, Black Pipes
- Part Number:
- misMMINT-TAC-24KBKBK
- SellingPoint01:
- Direct fit for the 2024+ Toyota Tacoma
- SellingPoint02:
- Bar-and-plate core with a 55% increase in volume for improved heat dissipation and cooling efficiency
- SellingPoint03:
- Achieves a 36°F reduction in intake temperatures during wide-open throttle
- SellingPoint04:
- Delivers a 30% lower pressure drop compared to stock, reducing stress on the turbocharger and helping maintain consistent responsive power across the RPM range
- SellingPoint05:
- Robust bar-and-plate core offers even flow from top to bottom
- SellingPoint06:
- Includes new mounting bushings and a crush washer for the factory temperature sensor for a secure and leak-free install
- SellingPoint07:
- Carefully designed to avoid interference with the Tacoma adaptive cruise control system to preserve full functionality of factory safety features
- SellingPoint08:
- Compatible with both stock and Mishimoto charge pipes for flexible upgrade paths
- SellingPoint09:
- Available in a sleek silver or stealth black powder-coated finish
- SellingPoint10:
- Mishimoto Lifetime Warranty
- SellingPoint11:
- N/A
- SellingPoint12:
- N/A
- SellingPoint13:
- N/A
- SellingPoint14:
- N/A
- SellingPoint15:
- N/A
- TechSpec Applications:
- Toyota Tacoma 2.4L L4 2024+
- TechSpec Centerline Radius:
- 3.94 (Hot-Side) 4.72 (Cold-Side)
- TechSpec Chassis Codes:
- N400
- TechSpec Core Height (in):
- 8.9
- TechSpec Core Length (in):
- 24.1
- TechSpec Core Thickness (in):
- 3.5
- TechSpec Core Type:
- Bar-And-Plate
- TechSpec Engine Codes:
- T24A-FTS
- TechSpec Includes:
- (1) Performance Intercooler--(2) Vacuum Fittings--(1) Intercooler Duct--(1) Intercooler Duct Bracket--(2) Hot-Side Intercooler Pipes--(2) Cold-Side Intercooler Pipes--(2) Silicone Couplers--(1) Bill Of Materials Notecard--Mishimoto Lifetime Warranty
- TechSpec Inlet (in):
- 2.0
- TechSpec Installation Notes:
- N/A
- TechSpec Maximum Recommended Boost Pressure (PSI):
- 50
- TechSpec Maximum Recommended Horsepower:
- 650
- TechSpec Note:
- N/A
- TechSpec Outlet (in):
- 2.25
- TechSpec Overall Height (in):
- N/A
- TechSpec Overall Length (in):
- N/A
- TechSpec Overall Width (in):
- N/A
- TechSpec Pipe Diameter:
- 2.5" (Hot-Side) 3" (Cold-Side)
- TechSpec Pipe Length:
- 16.34 (Hot-Side) 18.90 (Cold-Side)
- TechSpec Pipe Shape:
- Round
- TechSpec Weight (lbs):
- 33.5
Reference Information
| Brand Name/s | Mishimoto |
|---|---|
| StreetFX SKU | misMMINT-TAC-24KBKBK |
| SFX Item ID | 4052523 |
| Supplier Item Code | 4052523 |
| Manufacturer SKU | MMINT-TAC-24KBKBK |
| Manufacturer UPC | 840197726280 |
Brochures
Compatibility
Loading compatibility information...
Keep shopping
More from Mishimoto
On sale
Mishimoto
Mishimoto 01-07 Subaru WRX / WRX STI Black Silicone Induction Hose
misMMHOSE-SUB-IHBK
A$578.64
Mishimoto
Mishimoto Dodge/Chrysler/Jeep Hemi 5.7L/6.1L/6.4L Racing Thermostat
misMMTS-JED-06L
A$125.19
On sale
Mishimoto
Mishimoto 01-07 Subaru WRX and STi Manual Aluminum Radiator
misMMRAD-WRX-01
A$786.55
A$842.30