Mishimoto 2024+ Ford Mustang 2.3L EcoBoost Performance Intercooler Kit - Black/Black
Mishimoto 2024+ Ford Mustang 2.3L EcoBoost Performance Intercooler Kit - Black/Black
A$2,925.23
Available from MFR.
This item is available from the manufacturer's distribution centre. The dispatch timeframe shown is an estimate based on historical order processing and release times for this part. This item is not held in our own warehouse, and actual dispatch timing may vary depending on manufacturer workload and logistics at the time of ordering.
We accept
Description
Upgrade your 2024+ Ford Mustang EcoBoost with the Mishimoto Intercooler and Pipe Kit, a complete system designed to maximize airflow, lower intake temps, and boost performance. This kit combines a direct-fit bar-and-plate intercooler with high-flow hot-side and cold-side aluminum pipes, delivering safe, tune-free power gains. -- The intercooler features cast aluminum end tanks and fits in the stock location with a 60% increase in core volume. Oversized 63mm inlets/outlets improve flow, while a diverter plate ensures even air distribution. Foam sealing strips and a custom-formed air deflector maximize airflow through the core and reduce NVH. Four EPDM rubber sandwich mounts isolate vibration and add rigidity. Gains of up to 12 hp and 11 ft-lbs of torque are possible with no tuning, and a pre-drilled NPT port allows for auxiliary sensors or data logging. -- The included intercooler pipes are made from durable aluminum with cast connections for strength and precise fitment. A cast turbo outlet elbow integrates the blow-off valve seat and retains factory harness clipping points for a clean install. CNC-machined quick-disconnect fittings, DuraCore(TM) silicone couplers, high-torque worm-gear clamps, and an ID-matched transition coupler ensure secure, high-flow connections. Extra clearance also allows compatibility with the Mishimoto performance radiator. -- Available in polished or wrinkle black finishes, the Mishimoto Intercooler and Pipe Kit provides improved airflow, reduced intake temps, better underhood aesthetics, and long-term durability. Installation is straightforward with all hardware included, and every kit is backed by the Mishimoto Lifetime Warranty.
Product Overview
Upgrade your 2024+ Ford Mustang EcoBoost with the Mishimoto Intercooler and Pipe Kit, a complete system designed to maximize airflow, lower intake temps, and boost performance. This kit combines a direct-fit bar-and-plate intercooler with high-flow hot-side and cold-side aluminum pipes, delivering safe, tune-free power gains.
--
The intercooler features cast aluminum end tanks and fits in the stock location with a 60% increase in core volume. Oversized 63mm inlets/outlets improve flow, while a diverter plate ensures even air distribution. Foam sealing strips and a custom-formed air deflector maximize airflow through the core and reduce NVH. Four EPDM rubber sandwich mounts isolate vibration and add rigidity. Gains of up to 12 hp and 11 ft-lbs of torque are possible with no tuning, and a pre-drilled NPT port allows for auxiliary sensors or data logging.
--
The included intercooler pipes are made from durable aluminum with cast connections for strength and precise fitment. A cast turbo outlet elbow integrates the blow-off valve seat and retains factory harness clipping points for a clean install. CNC-machined quick-disconnect fittings, DuraCore™ silicone couplers, high-torque worm-gear clamps, and an ID-matched transition coupler ensure secure, high-flow connections. Extra clearance also allows compatibility with the Mishimoto performance radiator.
--
Available in polished or wrinkle black finishes, the Mishimoto Intercooler and Pipe Kit provides improved airflow, reduced intake temps, better underhood aesthetics, and long-term durability. Installation is straightforward with all hardware included, and every kit is backed by the Mishimoto Lifetime Warranty.
Features and Benefits
- Gains of up to 12 hp and 11 ft-lbs of torque on a stock tune
- Reduces charged-air temperatures at outlet by up to 60°F
- Robust bar-and-plate core with cast aluminum end tanks supports up to 526 hp
Product Details
| Description: | Mishimoto 2024+ Ford Mustang 2.3L EcoBoost Performance Intercooler Kit - Black/Black |
|---|---|
| Install Difficulty: | 3 |
| Part Number: | misMMINT-MUS4-24KBKBK |
| Prop 65 - Short Label: | WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov |
| Prop 65 Y/N: | Y |
| SellingPoint01: | Gains of up to 12 hp and 11 ft-lbs of torque on a stock tune |
| SellingPoint02: | Reduces charged-air temperatures at outlet by up to 60°F |
| SellingPoint03: | Robust bar-and-plate core with cast aluminum end tanks supports up to 526 hp |
| SellingPoint04: | Largest possible core in stock location with 60% more volume than factory |
| SellingPoint05: | Designed to mount to subframe with four rubber sandwich mounts for rigidity and vibration isolation |
| SellingPoint06: | DuraCore™ silicone couplers designed to withstand high temperature and boost pressures |
| SellingPoint07: | Includes CNC quick-disconnect fittings and high-torque worm-gear clamps for secure fitment |
| SellingPoint08: | Cast end sections on both pipes provide a smooth transition for maximum airflow and precise fitment |
| SellingPoint09: | ID-matched transition coupler on cold side for smooth airflow into intercooler |
| SellingPoint10: | Diverter plate in hot side end tank offers even airflow distribution |
| SellingPoint11: | Intercooler available in silver or black for sharp aesthetics behind the grille |
| SellingPoint12: | Pipes available in polished or wrinkle black finish for a clean underhood look |
| SellingPoint13: | Mishimoto Lifetime Warranty |
| SellingPoint14: | N/A |
| SellingPoint15: | N/A |
| TechSpec Applications: | 2024+ Ford Mustang EcoBoost |
| TechSpec Centerline Radius: | 3.15 |
| TechSpec Chassis Codes: | S650 |
| TechSpec Core Height (in): | 6.08 |
| TechSpec Core Length (in): | 22.83 |
| TechSpec Core Thickness (in): | 3.54 |
| TechSpec Core Type: | Bar-and-Plate |
| TechSpec Engine Codes: | 2.3L EcoBoost I4 |
| TechSpec Includes: | (1) Mishimoto Performance Intercooler--(1) Deflector Panel Kit--(1) Bracket Kit--(2) Hot Side Pipes--(1) Cold Side Pipe--(2) Duracore Couplers--(4) Spring Clamps--(2) O-Rings--(3) Buttonhead Locking Bolts--(1) Tree Clip Zip Tie--Mishimoto Lifetime Warranty |
| TechSpec Inlet (in): | 2.44 |
| TechSpec Maximum Recommended Boost Pressure (PSI): | 50 |
| TechSpec Maximum Recommended Horsepower: | 526 |
| TechSpec Outlet (in): | 2.44 |
| TechSpec Overall Height (in): | 6.5 |
| TechSpec Overall Length (in): | 35.7 |
| TechSpec Overall Width (in): | 5.3 |
| TechSpec Pipe Diameter: | 2.75 |
| TechSpec Weight (lbs): | 17 |
Part Type
Intercooler Kit
Features
- Gains of up to 12 hp and 11 ft-lbs of torque on a stock tune
- Reduces charged-air temperatures at outlet by up to 60F
- Robust bar-and-plate core with cast aluminum end tanks supports up to 526 hp
Specifications
- Description:
- Mishimoto 2024+ Ford Mustang 2.3L EcoBoost Performance Intercooler Kit - Black/Black
- Install Difficulty:
- 3
- Part Number:
- misMMINT-MUS4-24KBKBK
- Prop 65 - Short Label:
- WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov
- Prop 65 Y/N:
- Y
- SellingPoint01:
- Gains of up to 12 hp and 11 ft-lbs of torque on a stock tune
- SellingPoint02:
- Reduces charged-air temperatures at outlet by up to 60°F
- SellingPoint03:
- Robust bar-and-plate core with cast aluminum end tanks supports up to 526 hp
- SellingPoint04:
- Largest possible core in stock location with 60% more volume than factory
- SellingPoint05:
- Designed to mount to subframe with four rubber sandwich mounts for rigidity and vibration isolation
- SellingPoint06:
- DuraCore™ silicone couplers designed to withstand high temperature and boost pressures
- SellingPoint07:
- Includes CNC quick-disconnect fittings and high-torque worm-gear clamps for secure fitment
- SellingPoint08:
- Cast end sections on both pipes provide a smooth transition for maximum airflow and precise fitment
- SellingPoint09:
- ID-matched transition coupler on cold side for smooth airflow into intercooler
- SellingPoint10:
- Diverter plate in hot side end tank offers even airflow distribution
- SellingPoint11:
- Intercooler available in silver or black for sharp aesthetics behind the grille
- SellingPoint12:
- Pipes available in polished or wrinkle black finish for a clean underhood look
- SellingPoint13:
- Mishimoto Lifetime Warranty
- SellingPoint14:
- N/A
- SellingPoint15:
- N/A
- TechSpec Applications:
- 2024+ Ford Mustang EcoBoost
- TechSpec Centerline Radius:
- 3.15
- TechSpec Chassis Codes:
- S650
- TechSpec Core Height (in):
- 6.08
- TechSpec Core Length (in):
- 22.83
- TechSpec Core Thickness (in):
- 3.54
- TechSpec Core Type:
- Bar-and-Plate
- TechSpec Engine Codes:
- 2.3L EcoBoost I4
- TechSpec Includes:
- (1) Mishimoto Performance Intercooler--(1) Deflector Panel Kit--(1) Bracket Kit--(2) Hot Side Pipes--(1) Cold Side Pipe--(2) Duracore Couplers--(4) Spring Clamps--(2) O-Rings--(3) Buttonhead Locking Bolts--(1) Tree Clip Zip Tie--Mishimoto Lifetime Warranty
- TechSpec Inlet (in):
- 2.44
- TechSpec Maximum Recommended Boost Pressure (PSI):
- 50
- TechSpec Maximum Recommended Horsepower:
- 526
- TechSpec Outlet (in):
- 2.44
- TechSpec Overall Height (in):
- 6.5
- TechSpec Overall Length (in):
- 35.7
- TechSpec Overall Width (in):
- 5.3
- TechSpec Pipe Diameter:
- 2.75
- TechSpec Weight (lbs):
- 17
Reference Information
| Brand Name/s | Mishimoto |
|---|---|
| StreetFX SKU | misMMINT-MUS4-24KBKBK |
| SFX Item ID | 5532139 |
| Supplier Item Code | 5532139 |
| Manufacturer SKU | MMINT-MUS4-24KBKBK |
| Manufacturer UPC | 840197725610 |
| Alternative References | 2.3L |
Brochures
Compatibility
Loading compatibility information...
Keep shopping
More from Mishimoto
On sale
Mishimoto
Mishimoto 01-07 Subaru WRX / WRX STI Black Silicone Induction Hose
misMMHOSE-SUB-IHBK
A$578.64
Mishimoto
Mishimoto Dodge/Chrysler/Jeep Hemi 5.7L/6.1L/6.4L Racing Thermostat
misMMTS-JED-06L
A$125.19
On sale
Mishimoto
Mishimoto 01-07 Subaru WRX and STi Manual Aluminum Radiator
misMMRAD-WRX-01
A$786.55
A$842.30