Mishimoto 04-11 Mazda RX8 Oil Line Kit

SKU: MISMMSBH-RX8-04K

Oil Lines and Kits

MM Oil Lines...

Mishimoto

Mishimoto 04-11 Mazda RX8 Oil Line Kit

SKU: MISMMSBH-RX8-04K

Oil Lines and Kits

MM Oil Lines...

Sale ends in Calculating... Wed 14 Oct, 5:05 am AEST

LOW STOCK! Est Ship 3-5 days. HURRY! LOW STOCK. This item is in limited stock at one of our distribution centres. The ETA is the approximate time required to prepare your order for dispatch.

We accept

Description

The Mazda RX8 has a high-winding rotary engine capable of easy reaching 9,000RPMs on a daily basis. With those revs comes very high oil temperatures. Most RX8 models with manual transmissions were outfitted with dual oil coolers from the factory to keep the rotary engine's oil at a safe temperature during high speed driving and track situations. Unfortunately, over time, the stock rubber oil lines and steel fittings can severely corrode and degrade over time. This full kit from Mishimoto replaced all oil lines with braided stainless units and aluminum fittings that will not corrode or degrade over time. This kit also replaces the most frequent line to corrode, which is located on the left hand side of the car near the front suspension assembly. With the Mishimoto replacement oil line kit, all oil lines between the engine, and both oil coolers are replaced, including the intermediate line that spans both oil coolers found in all manual transmission models. The oil line fits onto the vehicle with no additional modification, and does not require any cutting to your vehicle or permanent removal of parts. This oil line kit comes with all banjo bolts, M18 fittings, and a male to male -10AN connector to complete the installation. Keep you RX8 protected and running smooth! As with all our products, this kit includes the Mishimoto Lifetime Warranty.

Product Overview

Features and Benefits

Direct fit for the 2004-2008 Mazda RX8
Premade braided stainless steel oil lines and aluminum fittings replace corrosion-prone stock rubber
Full kit includes four braided stainless steel oil lines, M18 banjo bolts, and all the necessary fit
Oil lines come prelabeled for easy identification
Mishimoto Lifetime Warranty

Product Details

Alternate Part Number:	MMSBH-RX804K
Color:	Black
Description:	Mazda RX8 Oil Line Kit
Feature Bullet 1:	Direct fit for the 2004--2011 Mazda RX8
Feature Bullet 2:	Premade braided stainless steel oil lines and aluminum fittings replace corrosion-prone stock rubber
Feature Bullet 3:	Full kit includes four braided stainless steel oil lines, M18 banjo bolts, and all the necessary fit
Feature Bullet 4:	Oil lines come prelabeled for easy identification
Feature Bullet 5:	Mishimoto Lifetime Warranty
Finish:	Stainless
Install Difficulty:	4
Installation Difficulty:	5/5
Material:	Stainless Steel Braid
Part Number:	misMMSBH-RX8-04K
SellingPoint01:	Direct fit for the 2004-2008 Mazda RX-8
SellingPoint02:	Premade braided stainless steel oil lines and aluminum fittings replace corrosion-prone stock rubber lines
SellingPoint03:	Full kit includes four braided stainless steel oil lines, M18 banjo bolts, and all the necessary fittings and oil seals for a trouble-free installation
SellingPoint04:	Oil lines come prelabeled for easy identification
SellingPoint05:	Mishimoto Lifetime Warranty
SellingPoint06:	N/A
SellingPoint07:	N/A
SellingPoint08:	N/A
SellingPoint09:	N/A
SellingPoint10:	N/A
SellingPoint11:	N/A
SellingPoint12:	N/A
SellingPoint13:	N/A
SellingPoint14:	N/A
SellingPoint15:	N/A
Size:	-10AN
TechSpec Compatible Fluids:	N/A
TechSpec Fitting Angle:	N/A
TechSpec Inlet:	N/A
TechSpec Inner Material:	N/A
TechSpec Max Fluid Pressure (PSI):	N/A
TechSpec MaxFluidTemperature (F):	N/A
TechSpec Note:	This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.----Recommended torque specification for all straight fittings and banjo bolts: 15-25 lb-ftDo not exceed the maximum torque rating of 35 ft-lb
TechSpec Outlet:	N/A
TechSpec PurchaseIncludes:	2ft, 4in Stainless Steel Braided Hose with 90 Degree -10AN Fittings--4ft, 8in Stainless Steel Braided Hose with 90 Degree -10AN Fittings--3ft, 4in Stainless Steel Braided Hose with 45 Degree and Straight -10AN Fittings--2ft, 2in Stainless Steel Braided Hose with 90 Degree and Straight -10AN Fittings--M18 x -10AN Fittings w/ Dowty Oil Seals--M18 x -10AN Banjo Bolts w/ Dowty Oil Seals--10AN - 10AN Male Connector--Mishimoto Lifetime Warranty

Application Summary

2008 Mazda RX-8 40th Anniversary Edition 1.3 Liter, 2008 Mazda RX-8 40th Anniversary Edition 1.3 Liter, 2004-2007 Mazda RX-8 Base 1.3 Liter, 2004-2007 Mazda RX-8 Base 1.3 Liter, 2008-2011 Mazda RX-8 Grand Touring 1.3 Liter, 2008-2011 Mazda RX-8 Grand Touring 1.3 Liter, 2009-2011 Mazda RX-8 R3 1.3 Liter, 2005 Mazda RX-8 Shinka 1.3 Liter, 2005 Mazda RX-8 Shinka 1.3 Liter, 2008-2011 Mazda RX-8 Sport 1.3 Liter, 2008-2011 Mazda RX-8 Sport 1.3 Liter, 2008-2009 Mazda RX-8 Touring 1.3 Liter, 2008-2009 Mazda RX-8 Touring 1.3 Liter

Part Type

Engine Oil Cooler Line

Data: v4.2 - Upd: 2026-10-13 14:43:16

Features

Full kit includes four braided stainless steel oil lines, M18 banjo bolts, and all the necessary fittings and oil seals for a trouble-free installation
Oil lines come prelabeled for easy identification
Premade braided stainless steel oil lines and aluminum fittings replace corrosion-prone stock rubber lines

Specifications

Product Attributes - Brand: Mishimoto
Product Attributes - Manufacturer's Part Number: MMSBH-RX8-04K
Product Attributes - Part Type: Oil Lines and Kits
Product Attributes - UPC: 748354021882

Reference Information

Brand Name/s	Mishimoto
StreetFX SKU	misMMSBH-RX8-04K
SFX Item ID	4050387
Supplier Item Code	4050387
Manufacturer SKU	MMSBH-RX8-04K
Manufacturer UPC	748354021882
Alternative References	mio-mmsbh-rx804k, rx8, MIMMMSBH-RX8-04K