MagnaFlow Univ Cat Conv CA MagnaFlow Univ Cat Conv 2.0in Inlet/Outlet Center/Center Round
MagnaFlow Univ Cat Conv CA MagnaFlow Univ Cat Conv 2.0in Inlet/Outlet Center/Center Round
A$744.60
Available from MFR.
This item is available from the manufacturer's distribution centre. The dispatch timeframe shown is an estimate based on historical order processing and release times for this part. This item is not held in our own warehouse, and actual dispatch timing may vary depending on manufacturer workload and logistics at the time of ordering.
We accept
Description
IMPORTANT NOTICE: Universal fit catalytic converters may require the use of welding, cutting, and tube-bending equipment for installation. Tuning may be required when changing catalytic converters.
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 5571204. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Product Overview
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 5571204. The Universal design allows the part to fit a wide array of vehicles (cutting and welding required), and the stainless steel construction of this spun body catalytic converter is highly resistant to corrosion. The single laser fusion weld of the spun body greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Features and Benefits
- Expertly Formulated Catalyst Blend Maximizes Efficiency; Ensuring Optimal Emissions Control To Keep Your Light Off
- Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Compact; Lightweight Construction Enables Installation In Confined Areas; Welding Is Required
- Your Trusted Source For CARB-Compliant Catalytic Converters; Providing Assurance Of Genuine Compliance
- High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
- Durable 308 Stainless Steel MIG Welds
- Compact, lightweight construction enables installation in confined areas, welding is required
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
Product Details
| Air Tube Adaptable: | No |
|---|---|
| Air Tube Count: | 0 |
| Body Height: | 4 |
| Body Length: | 9.25 |
| Body Material: | Stainless Steel |
| Body Shape: | Round |
| Body Type: | Spun |
| Body Width: | 4.000 in. |
| CARB Executive Order Number: | D-193-137 |
| California Air Resources Board (CARB) Certified: | Yes |
| Catalytic Converter Air Tube Adapter: | Not Air Tube Kit Adaptable |
| Clamp Included: | No |
| Clamps Included: | No |
| Converter Quantity: | 1 |
| Core Substrate Material: | Ceramic |
| Description: | California Universal Catalytic Converter-2.00in. |
| Finish: | Stainless Steel |
| Gasket Included: | No |
| Grade Type: | Regular |
| Hangers Included: | No |
| Heat Shield Attached: | No |
| Heat Shield Included: | Yes |
| Heat Shield Material: | None |
| Inlet Attachment Type: | Weld-On |
| Inlet Attachment: | Weld-On |
| Inlet Gasket Included: | No |
| Inlet Inside Diameter: | 2.000 in. |
| Inlet Mounting Hardware Included: | No |
| Inlet Orientation: | Straight |
| Inlet Quantity: | 1 |
| Inlet Type: | Weld-On |
| Material: | Stainless Steel |
| Mounting Hardware Included: | No |
| Outlet Attachment Type: | Weld-On |
| Outlet Attachment: | Weld-On |
| Outlet Gasket Included: | No |
| Outlet Inside Diameter: | 2 |
| Outlet Mounting Hardware Included: | No |
| Outlet Orientation: | Straight |
| Outlet Quantity: | 1 |
| Outlet Type: | Weld-On |
| Overall Length: | 9.25 |
| Oxygen Sensor Location: | None |
| Part Number: | mag5571204 |
| Pipe Material: | Stainless Steel |
| Prop 65 Y/N: | No |
| Sensor Port Count: | 0 |
| Series: | California |
| Substrate Material: | Ceramic |
| Subtitle: | CARB Compliant Universal Catalytic Converter |
| Subtitles: | California / CARB Compliant |
| Title: | MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 5571204 |
| Tube Material: | Stainless Steel |
| Type: | Universal |
| Universal Or Specific Fit: | Universal |
| WARNING CA Proposition 65: | No |
Part Type
Catalytic Converters
Features
- Compact, lightweight construction enables installation in confined areas, welding is required
- Compact; Lightweight Construction Enables Installation In Confined Areas; Welding Is Required
- Durable 308 stainless steel MIG welds
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Expertly Formulated Catalyst Blend Maximizes Efficiency; Ensuring Optimal Emissions Control To Keep Your Light Off
- High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
- Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Your Trusted Source For CARB-Compliant Catalytic Converters; Providing Assurance Of Genuine Compliance
Specifications
- Product Attributes - Brand
- MagnaFlow
- Product Attributes - Manufacturer's Part Number
- 5571204
- Product Attributes - Part Type
- Catalytic Converters
- Product Attributes - Product Line
- MagnaFlow Universal Catalytic Converters
- Product Attributes - UPC
- 888563107639
- Product Attributes - Inlet Quantity
- 1
- Product Attributes - Inlet Diameter (in.)
- 2.00 in.
- Product Attributes - Converter Inlet Attachment
- Slip fit
- Product Attributes - Outlet Quantity
- 1
- Product Attributes - Outlet Diameter (in.)
- 2.00 in.
- Product Attributes - Converter Outlet Attachment
- Slip fit
- Product Attributes - Converter Case Material
- Stainless steel
- Product Attributes - Converter Substrate Material
- Ceramic honeycomb
- Product Attributes - Converter Style
- 3-way
- Product Attributes - Remanufactured
- No
- Product Attributes - AIR Tube
- No
- Product Attributes - Heat Shield
- No
- Product Attributes - Quantity
- Sold individually.
- Product Attributes - Notes
- Universal fit catalytic converters may require the use of welding, cutting, and tube-bending equipment for installation. Tuning may be required when changing catalytic converters.
- Product Attributes - CARB EO Number(s)
- D-193-137
- Product Attributes - Emissions
- California EO Approved
Reference Information
| Brand Name/s | Magnaflow |
|---|---|
| StreetFX SKU | mag5571204 |
| SFX Item ID | 4286684 |
| Supplier Item Code | 4286684 |
| Manufacturer SKU | 5571204 |
| Manufacturer UPC | 888563107639 |
| Alternative References | mpe-5571204, MFL5571204, 2.0in |
Compatibility
| Application Data |
|
|---|
Loading compatibility information...
Keep shopping
More from Magnaflow
