MagnaFlow 09-11 Lucerne V6 3.9L OEM Underbody Direct Fit Catalytic Converter
MagnaFlow 09-11 Lucerne V6 3.9L OEM Underbody Direct Fit Catalytic Converter
A$1,138.69
Available from MFR.
This item is available from the manufacturer's distribution centre. The dispatch timeframe shown is an estimate based on historical order processing and release times for this part. This item is not held in our own warehouse, and actual dispatch timing may vary depending on manufacturer workload and logistics at the time of ordering.
We accept
Description
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 52463. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2009-2011 Buick Lucerne and interchanges with OE part 15886960. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Product Overview
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 52463. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2009-2011 Buick Lucerne and interchanges with OE part 15886960. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Features and Benefits
- Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Simplifies Installation With Essential Gaskets And Hardware Being Included In The Box
- Your Trusted Source For EPA-Compliant Catalytic Converters
- Mandrel Bent Tubing Retains Oem-Like Design And Geometry
- High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
- Durable 308 Stainless Steel Mig Welds
- Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
Product Details
| Air Tube Adaptable: | No |
|---|---|
| Air Tube Count: | 0 |
| Body Material: | Stainless Steel |
| Body Type: | Spun |
| CARB Executive Order Number: | Not Applicable |
| California Air Resources Board (CARB) Certified: | No |
| California Air Resources Board (CARB): | No |
| Clamps Included: | No |
| Converter Quantity: | 1 |
| Core Substrate Material: | Ceramic |
| Description: | OEM Grade Direct-Fit Catalytic Converter |
| Finish: | Stainless |
| Grade Type: | Regular |
| Hanger Included: | No |
| Hangers Included: | No |
| Heat Shield Attached: | No |
| Inlet Attachment: | Bolt-On |
| Inlet Gasket Included: | Yes |
| Inlet Mounting Hardware Included: | No |
| Inlet Type: | Bolt-On |
| Material: | Stainless Steel |
| Outlet Gasket Included: | Yes |
| Outlet Mounting Hardware Included: | No |
| Outlet Type: | Bolt-On |
| Overall Length: | 24.500 in. |
| Oxygen Sensor Location: | Post Converter |
| Part Number: | mag52463 |
| Prop 65 Y/N: | No |
| Sensor Port Count: | 1 |
| Series: | OEM Grade |
| Substrate Material: | Ceramic |
| Subtitle: | Federal / EPA Compliant |
| Title: | MagnaFlow 2009-2011 Buick Lucerne OEM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter |
| Tube Material: | Stainless Steel |
| Type: | Direct-Fit |
| Universal Or Specific Fit: | Specific |
| WARNING CA Proposition 65: | No |
Features
- Durable 308 stainless steel MIG welds
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
- High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
- Mandrel Bent Tubing Retains Oem-Like Design And Geometry
- Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
- OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
- Simplifies Installation With Essential Gaskets And Hardware Being Included In The Box
- Your Trusted Source For EPA-Compliant Catalytic Converters
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
Specifications
- Air Tube Adaptable:
- No
- Air Tube Count:
- 0
- Body Material:
- Stainless Steel
- Body Type:
- Spun
- CARB Executive Order Number:
- Not Applicable
- California Air Resources Board (CARB) Certified:
- No
- California Air Resources Board (CARB):
- No
- Clamps Included:
- No
- Converter Quantity:
- 1
- Core Substrate Material:
- Ceramic
- Description:
- OEM Grade Direct-Fit Catalytic Converter
- Finish:
- Stainless
- Grade Type:
- Regular
- Hanger Included:
- No
- Hangers Included:
- No
- Heat Shield Attached:
- No
- Inlet Attachment:
- Bolt-On
- Inlet Gasket Included:
- Yes
- Inlet Mounting Hardware Included:
- No
- Inlet Type:
- Bolt-On
- Material:
- Stainless Steel
- Outlet Gasket Included:
- Yes
- Outlet Mounting Hardware Included:
- No
- Outlet Type:
- Bolt-On
- Overall Length:
- 24.500 in.
- Oxygen Sensor Location:
- Post Converter
- Part Number:
- mag52463
- Prop 65 Y/N:
- No
- Sensor Port Count:
- 1
- Series:
- OEM Grade
- Substrate Material:
- Ceramic
- Subtitle:
- Federal / EPA Compliant
- Title:
- MagnaFlow 2009-2011 Buick Lucerne OEM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter
- Tube Material:
- Stainless Steel
- Type:
- Direct-Fit
- Universal Or Specific Fit:
- Specific
- WARNING CA Proposition 65:
- No
Reference Information
| Brand Name/s | Magnaflow |
|---|---|
| StreetFX SKU | mag52463 |
| SFX Item ID | 4289405 |
| Supplier Item Code | 4289405 |
| Manufacturer SKU | 52463 |
| Manufacturer UPC | 888563179353 |
| Alternative References | MFL52463, 3.9L |
Compatibility
Loading compatibility information...
Keep shopping
